ANANDA D13 LCD Remote Kit Display

1. Introduzzjoni

This manual provides essential information for the installation, operation, and maintenance of your ANANDA D13 LCD Remote Kit Display for electric bikes. The D13 display is designed to provide key information and control functions for your e-bike system.

Figure 1: ANANDA D13 LCD Display Overview

2. Setup u Installazzjoni

Important: The ANANDA D13 LCD Remote Kit Display is a customized product. Before installation, please ensure compatibility with your e-bike system. Contact your seller if you have any doubts or require specific configuration information.

2.1 Kontenut tal-Pakkett

• ANANDA D13 LCD Display Unit
• Integrated connecting cable with 5-pin connector
• Mounting bracket (pre-attached or separate)

2.2 Immuntar tad-Displej

1. Identify a suitable location on your handlebar for the display. Ensure it does not obstruct your view jew il-kontroll tar-rota.
2. Secure the display's mounting bracket to the handlebar using the provided screw. Tighten securely but do not overtighten.
3. Adjust the angle of the display for optimal visibility.

2.3 Connecting the Display

1. Locate the corresponding connector on your e-bike's wiring harness. This is typically a 5-pin connector.
2. Align the pins of the display's cable connector with the e-bike's harness connector.
3. Gently push the connectors together until they click into place, ensuring a secure connection.
4. Route the cable neatly along the handlebar and frame, securing it with cable ties if necessary, to prevent snagging or damage.

Figure 2: Detail of the 5-pin connector

3. Istruzzjonijiet Operattivi

The ANANDA D13 display features three buttons for control: '+', '⚡/M', and '-'.

Figure 3: D13 Display Buttons

3.1 Power On/Off

• To power on the display and your e-bike system, press and hold the '⚡/M' button for a few seconds.
• To power off, press and hold the '⚡/M' button again until the display turns off.

3.2 Adjusting Assist Levels

• Use the '+' button to increase the pedal assist level.
• Use the '-' button to decrease the pedal assist level.

3.3 Changing Display Modes

• Press the '⚡/M' button briefly to cycle through different display modes (e.g., speed, distance, battery level, trip time).

3.4 Karatteristiċi Awtomatiċi

• The display supports automatic sleep and auto-pause functions to conserve battery life. These features activate after a period of inactivity.

4. Manutenzjoni

• **Cleaning:** Wipe the display screen and body with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
• **Storage:** When not in use for extended periods, store the display in a dry place within the specified storage temperature range (-30℃ to 70℃).
• **Connection Check:** Periodically check that all connections are secure and free from corrosion or damage.

5 Issolvi l-problemi

• **Display Not Turning On:**
  1. Kun żgur li l-batterija tal-e-bike hija ċċarġjata u konnessa sew.
  2. Check all cable connections, especially the 5-pin connector to the display, for looseness or damage.
  3. If the issue persists, contact your seller for further assistance.
• **Incorrect Readings:**
  1. Verify that the display is securely mounted and not vibrating excessively.
  2. If speed or distance readings are inaccurate, consult your e-bike's main controller manual or seller for calibration procedures.
• **Water Ingress:** The display has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. However, avoid prolonged exposure to heavy rain or submersion. If water ingress occurs, disconnect power immediately and allow the unit to dry completely before attempting to use it again.

6. Speċifikazzjonijiet

Figura 4: Lura view bil-parentesi tal-immuntar

7. Għajnuniet għall-Utenti

• **Speed Limit:** The display may be configured with a maximum speed lock, commonly set to 25 km/h, depending on regional regulations and e-bike settings.
• **Customization:** As a customized product, specific functionalities or settings might vary. Always refer to any additional documentation provided by your e-bike manufacturer or seller for detailed customization options.

8. Garanzija u Appoġġ

For any questions, problems, or support needs regarding your ANANDA D13 LCD Remote Kit Display, please contact your seller directly. They are best equipped to provide assistance tailored to your specific product and e-bike configuration.

The product typically includes a free return policy within 90 days of receipt. Please consult the seller's return policy for specific terms and conditions.