Introduzzjoni
This manual provides instructions for the SAGE LU MEI ESP32 WLED IP65 Outdoor Waterproof Digital LED Strip Controller. This device allows for advanced control of addressable LED strips, featuring music synchronization, a wide range of dynamic effects, and smart app control. Its IP65 waterproof rating makes it suitable for various indoor and outdoor applications.
Karatteristiċi Ewlenin
- Music-Activated Light Effects: Features a built-in high-sensitivity microphone that automatically synchronizes LED lights to music rhythms, enhancing party, camping, or home karaoke experiences.
- Effetti tad-Dawl Dinamiku: Preloaded with WLED firmware, offering over 100 dynamic effects including rainbow gradients, breathing mode, meteor showers, and color cycles.
- Smart APP Remote Control: Control colors, brightness, and effects in real-time via the WLED app (iOS/Android) or a web interface.
- IP65 reżistenti għall-ilma u għat-temp: Sealed design provides protection against rain, humidity, and splashes, making it safe for outdoor use (not submersible).
- Wide LED Compatibility: Supports industry-standard addressable LEDs such as WS2811, WS2812B, SK6812, WS2813, WS2814, WS2805, TM1814, and other 5V/12V/24V programmable strips.
- Kanali tal-Ħruġ: Available in 1-channel (DOM-WLE-SF, 15A Max) and 2-channel (DOM-WLE-SFM, 20A Max total) versions.
- Comprehensive Circuit Protection: Includes built-in fuse for overload protection, short-circuit prevention, and reverse polarity protection.
- Built-in AP Hotspot Mode: Allows for outdoor use without an existing WiFi network (SSID: WLED-AP).
- Kontroll tal-Vuċi u Integrazzjoni tad-Dar Intelliġenti: Compatible with Alexa, Google Assistant, and Home Assistant (HA).
X'hemm fil-Kaxxa
- WLED Music-Sync Controller (DOM-WLE-SF or DOM-WLE-SFM) x1
- Gwida għall-Bidu Mgħaġġel x1
- Note: WLED Remote Control (DOM-WLE-RC005) is sold separately.
Setup Istruzzjonijiet
1. Istruzzjonijiet tal-Wiring
Ensure the power supply is disconnected before wiring. Connect your LED strip and power source according to the diagrams below. The controller supports DC 5V-24V input; ensure your power supply voltage matches your LED strip's voltage.
Red protective caps prevent short circuits.
Blue wire: GND (Ground/Negative)
Yellow+green wire: IO16 (Data signal line)
Brown wire: V+ (Positive power supply Strip VCC)
Input: V-(Black), V+(Red)
Red protective caps prevent short circuits.
Blue wire: GND (Ground/Negative)
Yellow+green wire: IO16 (Data signal line)
Brown wire: V+ (Positive power supply Strip VCC)
Input: V-(Black), V+(Red)
Output1 and Output2 connections are similar.
2. Tniżżil tal-Applikazzjoni
The WLED app is used for controlling the LED strip. Download it using the following methods:
Step two (Android): Niżżel mill- websit: https://github.com/Aircoooke/WLED-App/releases
3. Passi ta' Konfigurazzjoni tal-App
Follow these steps to connect and configure your controller with the WLED app:
- L-ewwel pass: Power on the WLED controller. Open the phone settings and connect to the WLED-AP WiFi network with the password "wled1234".
- It-tieni pass: Open a browser and navigate to the WLED page. Click on "WIFI SETTINGS".
- It-tielet pass: Select your 2.4GHz WiFi network and enter the password. Save the settings.
- L-erba' pass: After saving, exit the page and connect your phone to the same WiFi network as the controller.
- Il-ħames pass: Open the WLED app. The controller should now be discoverable and configurable.
4. Connecting with Alexa
To integrate your WLED controller with Alexa for voice control, follow these steps:
- Go to the control page of the WLED controller, click on the "Config" button in the top right corner to enter the settings, and then click on "Sync Interfaces".
- Scroll up to find "Alexa Voice Assistant", check the box next to "Emulate Alexa device", and then save.
- After successfully saving, power cycle the WLED controller once by turning it off and on.
- Open "Amazon Alexa" app, click on the "Devices" page at the top right corner on the "+" sign, and then click "Add Device".
- Then, scroll up and click on "Other" to enter, select "Wi-Fi", and then click "Discover Devices" to search for lights.
Istruzzjonijiet Operattivi
1. Kontroll tal-App WLED
L-app WLED tipprovdi kontroll komprensiv fuq l-istrixxi LED tiegħek:
- Kuluri: Select from a wide palette of 16 million colors.
- Effetti: Choose from over 100 preloaded dynamic effects.
- Segmenti: Divide your light strip into multiple sections and apply unique colors and effects to each segment.
- Presets: Save and load your favorite lighting configurations.
2. Music Dynamic Mode
The built-in sensitive microphone enables the controller to react to music, creating dynamic light shows. After resetting, the microphone parameters need to be configured for the first time, and the device needs to be restarted.
1. Microphone type: Generic I2S
2. I2S SD pin: 26
3. I2S WS pin: 5
4. I2S SCK pin: 21
3. WLED Remote Control (Optional)
If you have purchased the DOM-WLE-RC005 remote control, you can use it to control basic functions of your LED strip.
Dawl indikatur
ON: Ixgħel id-dawl
OFF: Turn off the light
1, 2, 3, 4: Lighting Modes / Preset Scenes
Moon icon: Night light
Sun icons: Brightness adjustment
4. Relay Configuration
The controller includes a built-in relay. When configured, this allows the LED strip to be completely powered off when the lighting is turned off, reducing power consumption.
Manutenzjoni
- Tindif: Wipe the controller with a dry or slightly damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
- Espożizzjoni għall-Ilma: The controller has an IP65 rating, meaning it is protected against water jets. It is suitable for outdoor use where it may be exposed to rain or splashes. However, it is NOT designed to be submerged in water.
- Temperatura: Operate the device within the specified temperature range of -20°C to 45°C.
- Fuse Replacement (DOM-WLE-SFM): The 2-channel model (DOM-WLE-SFM) includes a replaceable 20A fuse. If the controller stops working due to an overload, check and replace the fuse if necessary.
Issolvi l-problemi
Quick Reset Guide
If the controller is unresponsive or you need to reset its settings, follow these steps:
- Itfi l-kontrollur.
- Wait for the LEDs to fully turn OFF.
- Power ON the controller.
- Repeat steps 1-3 five times. This sequence must be completed within 10 seconds.
- Success Indicator: After the 5th power cycle, the LEDs will blink 10 times, and then a yellow light will stay on.
- After a successful reset, you must configure GPIO12 in the WLED app settings.
Kwistjonijiet Komuni
- Controller not connecting to WiFi: Ensure you are connecting to a 2.4GHz WiFi network. Verify the WiFi password is correct. Try moving the controller closer to your WiFi router.
- LEDs not responding: Check all wiring connections for secure contact. Ensure the power supply voltage jaqbel mal-volum tal-istrixxa LEDtage. Verify the correct LED type is selected in the WLED app settings.
- Is-sinkronizzazzjoni tal-mużika mhux qed taħdem: Ensure the microphone function is enabled and correctly configured in the WLED app (refer to Microphone Function section).
- Il-kontroll mill-bogħod ma jaħdimx: Ensure the remote control has fresh batteries (2*AAA). Verify the remote is within the effective control distance (up to 50 meters).
Speċifikazzjonijiet
| Karatteristika | DOM-WLE-SF (1CH) | DOM-WLE-SFM (2CH) | DOM-WLE-RC005 (Remote) |
|---|---|---|---|
| Numru tal-Mudell | DOM-WLE-SF | DOM-WLE-SFM | DOM-WLE-RC005 |
| Isem tad-Ditta | SAGE LU MEI | ||
| Input Voltage | DC 5-24V | 3V (2 * AAA Battery) | |
| Massimu Kurrent tal-Ħruġ | 15A (Mass) | 15A/Channel, 20A (Total Max) | N/A |
| Max. Qawwa tat-Tagħbija | 360W | N/A | |
| Impermeabilità | IP65 | IP20 | |
| Temperatura operattiva | -20°C ~ 45°C | ||
| Modalità ta' Konnessjoni | WIFI | ||
| Metodu Kontrollat | APP tal-WiFi WLED / Kontroll remot WLED | ||
| Dwal Applikabbli | WS2811, WS2812, WS2812B, WS2813, SK6812, TM1814, WS2814, WS2805 Strixxa tad-Dawl | WLED system products | |
| Materjal | PC li jiflaħ għan-nar | ABS + PC | |
| Dimensjonijiet (L×W×H) | 71.5 × 57 × 30mm | 64 × 80 × 37mm | 150 × 38 × 13.5mm |
| Tip taċ-Ċippa | ESP32 | N/A | |
| Mibnija fil-MIC | Iva | N/A | |
| Protezzjoni | Output Reverse Polarity Protection | N/A | |
| Ċertifikazzjoni | CE, ROHS | ||
Għajnuniet għall-Utent
- For optimal music synchronization, place the controller in an area where the microphone can clearly pick up sound.
- Experiment with different dynamic effects and color palettes in the WLED app to find the perfect ambiance for any occasion.
- Utilize the segment control feature to create complex and personalized lighting designs on longer LED strips.
- If using the controller outdoors, ensure all connections are properly sealed and protected from direct water exposure, despite its IP65 rating.
Garanzija u Appoġġ
This product comes with a standard warranty. For specific warranty details or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.
