Manwal tal-Utent tal-Kaxxa tas-Swiċċ tal-Ħajt SONOFF E1GSL

1. Introduzzjoni

The SONOFF E1GSL Wall Switch Enclosure is an accessory from the Fusion Series, specifically designed to house the SONOFF MINI Modules, such as the ZBMINL2. This enclosure provides a physical switch interface for your retrofit module, ensuring a seamless and integrated smart home setup. Its ultra-slim design and compact rear structure are engineered for compatibility with various junction boxes, addressing common space limitations during installation.

Figure 1: SONOFF E1GSL Wall Switch Enclosure

2. Informazzjoni dwar is-Sigurtà

Please read this section carefully before installation and use. Failure to follow these instructions could result in electric shock, fire, or other hazards.

• Itfi l-Enerġija: Always ensure the main power supply is turned off at the circuit breaker before performing any electrical work, including installation or maintenance.
• Electrician kwalifikat: Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta elettriċista kwalifikat.
• Użu fuq ġewwa biss: This product is designed for indoor use in dry environments. Do not expose to moisture or extreme temperatures.
• Wiring kif suppost: Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u jikkonformaw mal-kodiċijiet elettriċi lokali.
• Evita tagħbija żejda: Do not exceed the electrical ratings of the connected SONOFF module or the circuit.

3. Kontenut tal-Pakkett

The package for the SONOFF E1GSL Wall Switch Enclosure typically includes:

• 1 x SONOFF E1GSL Wall Switch Enclosure
• Viti tal-Immuntar
• Manwal għall-Utent (dan id-dokument)

Figura 2: Kontenut tal-Pakkett

4. Speċifikazzjonijiet

Figura 3: Dimensjonijiet u Speċifikazzjonijiet tal-Prodott

5. Setup u Installazzjoni

The E1GSL enclosure is designed for easy clip-on installation and compatibility with standard mounting boxes. It requires a SONOFF ZBMINL2 In-wall Retrofit Module (sold separately) for full functionality.

5.1 Applicable Mounting Boxes

The E1GSL is compatible with:

• 86-Type Mounting Box
• European Round Mounting Box (Ø 60mm)

Its ultra-slim design helps it fit most shallow junction boxes, overcoming common installation challenges.

Figure 4: Compatible Mounting Box Types

5.2 Passi ta' Installazzjoni

Always ensure the main power is OFF before starting installation.

1. Remove the Switch Cover: Gently detach the front cover of the E1GSL enclosure.
2. Loosen Wiring Terminal Screws: On your SONOFF ZBMINL2 module, loosen all screws on its wiring terminals.
3. Install Module onto Bracket: Carefully place the ZBMINL2 module onto the back bracket of the E1GSL switch enclosure. Ensure it clips securely into place.
4. Wiring: Connect the necessary wires (L In, N, Load, S1, S2) to the ZBMINL2 module's terminals as per the wiring diagram below. After wiring, tighten all screws on the device's wiring terminals securely.
5. Immonta mal-ħajt: Install the assembled enclosure and module onto the wall mounting box using the provided screws. Ensure it is flush and secure.

Figura 5: Passi ta' Installazzjoni

5.3 Wiring Instructions (for ZBMINL2)

The E1GSL enclosure is designed to work with the SONOFF ZBMINL2, which typically does not require a neutral wire for the switch itself, simplifying installation. Refer to the diagram below for typical wiring connections.

Figure 6: Wiring Diagram (No Neutral Wire Required)

Nota: Before wiring, loosen all the screws on the SONOFF In-wall Retrofit Module's wiring terminals. After completing the wiring, tighten the screws securely.

6. Istruzzjonijiet Operattivi

The SONOFF E1GSL Wall Switch Enclosure provides a physical button interface for the connected SONOFF ZBMINL2 module. Once the ZBMINL2 module is correctly installed and powered, pressing the button on the E1GSL enclosure will trigger the smart switch functionality of the ZBMINL2, allowing you to control the connected load (e.g., lights).

• Stampa Unika: Typically toggles the connected device ON/OFF.
• Long Press/Multiple Presses: Refer to the SONOFF ZBMINL2 user manual for any advanced functions or pairing modes activated by specific button presses.

7. Manutenzjoni

• Tindif: Use a soft, dry cloth to clean the surface of the enclosure. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the PC material.
• Spezzjoni: Periodically check for any loose connections or signs of wear. If any damage is observed, discontinue use and consult a qualified technician.
• Kundizzjonijiet Ambjentali: Ensure the operating environment remains within the specified temperature range (-10°C ~ 40°C) and avoid excessive humidity.

8 Issolvi l-problemi

If you encounter issues with your E1GSL enclosure, consider the following:

• Enclosure Does Not Fit: Verify that your wall junction box is either an 86-Type or a European Round (Ø 60mm) type. The ultra-slim design is intended to fit most shallow boxes, but extreme cases may exist.
• Buttuna ma Tirrispondix: This enclosure is a passive interface. Ensure the SONOFF ZBMINL2 module is correctly installed, powered, and functioning. Check the ZBMINL2's own status and wiring.
• Konnessjonijiet sfużi: Re-check all wiring terminals on the ZBMINL2 module to ensure they are securely tightened.
• Ħsara Fiżika: If the enclosure is physically damaged, it should be replaced to ensure safety and proper function.

9. Għajnuniet għall-Utenti

• Iffrankar ta' Spazju: The ultra-slim design of the E1GSL is particularly beneficial for installations where wall box depth is limited. This helps avoid issues with traditional switches that might protrude or not fit properly.
• Integrazzjoni bla xkiel: The clip-on installation design simplifies the process of integrating the ZBMINL2 module, making it quicker and less cumbersome.
• Appell Estetiku: The micro-arc button design and PC material contribute to a clean and modern look, blending well with contemporary interiors.

10. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please contact SONOFF customer support directly or visit their official websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.