ECHTPower Wireless Game Controller

Introduzzjoni

This manual provides detailed instructions for the ECHTPower ES01 wireless game controller. It covers setup, connection, operation of various features, maintenance, and troubleshooting. Please read this manual thoroughly before using your controller to ensure optimal performance and longevity.

For a complete PDF version of this manual, please refer to the official user manual available at ECHTPower ES01 User Manual (PDF).

Kontenut tal-Pakkett

Kun żgur li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Wireless Controller x 1
• Charging Cable x 1 (USB-C)
• Manwal ta' Istruzzjoni x 1

Speċifikazzjonijiet

Parametri Tekniċi

Pjattaformi Kompatibbli

• Nintendo Switch (including Switch 2, Switch OLED, Switch Lite)
• PC
• Android
• iOS

Layout tal-Kontrollur

Familiarize yourself with the buttons and features of your ECHTPower ES01 controller:

• Buttuna tad-dar: Powers on/off the controller, returns to home screen.
• Turbo Button (+ Button): Activates/deactivates turbo functions.
• Screen Capture Button (- Button): Takes screenshots.
• Buttuni A/B/X/Y: Buttuni ta' azzjoni standard.
• Left Joystick / L3: Left analog stick, L3 button when pressed.
• Right Joystick / R3: Right analog stick, R3 button when pressed.
• D-pad: Kuxxinett direzzjonali.
• Buttuna M: Used for macro programming.
• R/L Buttons: Buttuni fuq l-ispalla.
• ZR/ZL Buttons: Buttuni tal-attivazzjoni.
• Port tal-Iċċarġjar tat-Tip C: Għall-iċċarġjar tal-kontrollur.
• LED tal-kanal: Indicates connection status and player number.
• ML/MR Buttons: Buttuni ta' wara programmabbli.
• Swiċċ tal-Vibrazzjoni: Jaġġusta l-intensità tal-vibrazzjoni.
• Light Switch Key: Controls RGB lighting.

Setup u Konnessjoni

Attivazzjoni Inizjali

Before initial use, the controller must be charged using the provided USB-C data cable to activate its internal battery.

Qawwa mixgħul/mitfi

• Qawwa Mixgħul: Agħfas ħafif il- Dar buttuna.
• Itfi: Agħfas ħafif il- Tqabbil buttuna.

Connection Methods for Various Devices

Nota: When connecting to the Switch via wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Istruzzjonijiet Operattivi

Turbo Rapid Fire Function

Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad

• Turbo manwali: Żomm il- T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Turbo Awtomatiku: Żomm il- T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Itfi Turbo: Żomm il- T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All Turbo Settings: Agħfas u żomm il- T button for 3 seconds to clear rapid fire settings for all buttons.
• Aġġustament tal-veloċità: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the T button on the controller and simultaneously move the right joystick up or down to adjust the speed.

Macro Setting for Back Buttons (ML/MR)

Supported buttons for mapping: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD

• Dħul fil-Modalità ta' Programmazzjoni: Agħfas u żomm il- M button for 2 seconds. The left and right 3D rings will slowly flash (if LED effects are enabled), indicating the controller has entered programming mode.
• Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Agħfas ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
• Nota: You can program up to 16 button inputs. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: Wara li żżomm il- M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.

Light Adjustment (RGB Lighting)

• Light Key + R3: Switch between 3 lighting modes: Steady, Breathing/Running Horse, Rainbow.
• Light Key + L3:
  • In Steady mode: Switch colors.
  • In Breathing/Running Horse mode: No effect.
  • In Rainbow mode: Pause rainbow effect.
• Reset Lights to Default: Agħfas il- + u Turbo buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset.
• Turn Off/On Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.

Aġġustament tal-Vibrazzjoni

• Aġġusta l-Intensità: After connecting the controller, hold the Swiċċ tal-Vibrazzjoni button on the back of the controller while moving the left 3D joystick up or down. This will increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
• Disable/Re-enable Vibration: Agħfas u żomm il- Swiċċ tal-Vibrazzjoni for 10 seconds to disable the vibration function of both motors. Press and hold it again for 10 seconds to re-enable.

Joysticks tal-Effett Hall

The ES01 controller features Hall Effect joysticks, which use electromagnetic sensors for precise position detection, significantly reducing the common issue of joystick drift and enhancing durability.

Iċċarġjar u Batterija

Iċċarġjar tal-Kontrollur

Connect the provided USB-C charging cable to the controller and a compatible USB power adapter (DC 5V). The charging indicator will glow orange while charging. Once fully charged, the orange indicator will turn off.

Indikatur tal-Batterija Baxxa

When the battery is low, the light of the current channel (player indicator) will flash quickly to remind you to charge the controller.

Modalità Standby

• Manual Standby: When the controller is powered on, short press the Tqabbil buttuna biex tidħol fil-modalità standby.
• Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
• Automatic Standby (Inactivity): When connected to a console, the controller will automatically enter standby mode after 15 minutes of inactivity.

Irrisettjar il-Kontrollur

If the controller malfunctions or becomes unresponsive, you can perform a reset:

• Agħfas u żomm il- Dar button for 10 seconds. This will reset the controller to its default state.

Għajnuniet għall-Utent

• NFC/Amiibo Compatibility: The ECHTPower ES01 controller does not support NFC for Amiibo functionality. Please use official Nintendo controllers if this feature is required.
• Prestazzjoni ottimali: For the best gaming experience, ensure your controller is fully charged before extended play sessions.
• Personalizzazzjoni: Experiment with the RGB lighting and vibration settings to find your preferred setup for different games.

Issolvi l-problemi

• Il-Kontrollur Mhux Jirrispondi: Try resetting the controller by holding the Home button for 10 seconds. Ensure it is charged.
• Kwistjonijiet ta' Konnessjoni: Double-check the connection method for your specific device (refer to the 'Connection Methods' table). For Switch wired connection, verify the 'Pro Handle Wired Connection' setting is enabled.
• Drift tal-Joystick: The ES01 features Hall Effect joysticks designed to prevent drift. If you experience any issues, try resetting the controller. If the problem persists, contact support.
• Dwal ma Jaħdmux: Ensure the lighting feature is enabled (Light Key + R3). If still not working, try resetting the lights by pressing + and Turbo simultaneously for 3 seconds.
• Il-Vibrazzjoni Ma Taħdimx: Check if the vibration function is enabled by holding the Vibration Switch for 10 seconds to toggle it. Adjust intensity if needed.

Garanzija u Appoġġ

The ECHTPower ES01 controller comes with a 12-month warranty for worry-free gaming.

Informazzjoni ta' Kuntatt

• Manifattur: Shenzhen Mike Morgen Technology Co., Ltd
• Indirizz: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
• Telefon: 0755-21010839
• Email: servizz@echtpower.com
• Websit: www.echtpower.com
• ID tal-FCC: 2A88F-ES01

Our support team is available 24/7 to assist you. We aim to resolve all issues within 24 hours.