Manwal għall-Utent

Introduzzjoni

Thank you for choosing the BRPOM Portable Jump Starter with Air Compressor. This versatile device is designed to be an essential tool for any vehicle owner, offering powerful jump-starting capabilities, a high-performance tire inflator, and a portable power bank, all in one compact unit. Please read this manual carefully before use to ensure safe and optimal operation.

Kontenut tal-Pakkett

Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:

• Portable Jump Starter with Air Compressor Unit
• 12V Battery Jumper Cables (Smart Clamps)
• Pajp tal-Pompa tal-Arja
• Various Inflation Nozzles (Gas nozzles)
• Cable tal-Iċċarġjar tal-USB-C
• Manwal għall-Utent (dan id-dokument)
• Adapter tal-Lajter tas-Sigaretti
• Soft Cloth Storage Bag

Image: Contents of the BRPOM Portable Jump Starter package, including the main unit, jumper cables, air hose, nozzles, cables, and storage bag.

Prodott Overview

Familiarize yourself with the main components and controls of your jump starter:

Image: Diagram of the jump starter with labeled parts and buttons.

1. Air Pump Interface
2. Type-C Input (for charging the unit)
3. USB Output (for charging external devices)
4. Flashlight
5. Ħanut tal-Ajru
6. Dħul ta' l-Ajru
7. EC5 Interface (for jumper cables)
8. Electronic Display Screen

Buttuni tal-Kontroll:

• Power button / Start button
• Blower Button / Vacuum Button
• Buttuna tal-flashlight
• Mode Selection Button (M)
• Buttuna Żieda fil-Pressjoni tal-Arja (+)
• Buttuna għat-Tnaqqis tal-Pressjoni tal-Arja (-)
• Buttuna OK

Setup

Iċċarġjar Inizjali

Before first use, fully charge the jump starter. Connect the USB-C charging cable to the Type-C input port on the device and plug the other end into a suitable USB power adapter (not included). The electronic display screen will indicate the charging status and battery level. Ensure the device is fully charged for optimal performance, especially before jump-starting a vehicle.

Istruzzjonijiet Operattivi

1. Jump Starting Your Vehicle

Follow these steps carefully to jump start a dead vehicle battery:

1. Insert the Jump Cable: Plug the smart jumper cable connector into the EC5 interface on the jump starter. Ensure a secure connection.
2. Qabbad il-Clamps: Waħħal l-aħmar (+) clamp to the positive (+) terminal of the vehicle's battery and the black (-) clamp to the negative (-) terminal of the vehicle's battery. The smart clamps have built-in protection features.
3. Start Your Car Engine: Ladarba l-clamps are securely connected and the jump starter is ready (indicated by the display), start your vehicle's engine.
4. Neħħi l-Clamps: Immediately remove the jumper cables from the vehicle battery terminals and then from the jump starter once the car has started.

Note: Please immediately remove the clip after starting the car to prevent damage to the device or vehicle.

Image: Four-step guide on how to jump start a vehicle using the BRPOM jump starter.

2. Using the Air Compressor (Tire Inflator)

Il-kompressur tal-arja integrat jista' jintefaħ it-tajers u oġġetti oħra li jintefħu sa 150 PSI.

1. Qabbad il-Pajp tal-Arja: Screw the air pump hose onto the Air Pump Interface.
2. Waħħal iż-żennuna: Select the appropriate nozzle for your item (car tire, motorcycle tire, bicycle tire, basketball, etc.) and attach it to the air hose.
3. Ixgħel u Agħżel il-Modalità: Press the Power button. Use the Mode Selection (M) button to cycle through the 4 inflation modes (car, motorcycle, bicycle, basketball) or manually set the desired pressure.
4. Issettja Pressjoni: Use the (+) and (-) buttons to adjust the target pressure (PSI, BAR, KPA, kg/cm²).
5. Ibda l-Inflazzjoni: Press the OK button to begin inflation. The device will automatically stop when the target pressure is reached.

Image: The jump starter inflating a car tire, demonstrating its 150 PSI capability and various inflation modes.

3. Użu bħala Power Bank Portabbli

The device can charge various electronic devices via its USB output port.

1. Qabbad Apparat: Plug your device's USB charging cable into the USB Output port on the jump starter.
2. Ibda l-Iċċarġjar: The jump starter will automatically begin charging your device. The display may show the charging status.

It is compatible with phones, iPads, UAVs, headphones, smartwatches, and cameras.

Image: The jump starter functioning as a portable power bank, charging a smartphone and other electronic devices.

4. Using Emergency LED Lights

The built-in LED light offers multiple modes for emergency situations.

1. Attiva l-Flashlight: Press the Flashlight Button once to turn on the steady flashlight mode.
2. Modi taċ-ċiklu: Hold the Flashlight Button for 3 seconds to cycle through different light modes: Flashlight, SOS signal, and Strobe light.
3. Itfi: Press the Flashlight Button again to turn off the light.

These lights are practical for outdoor camping, night hiking, and home power outages.

Image: The jump starter's emergency LED lights demonstrating flashlight, SOS, and strobe modes.

Manutenzjoni

Iċċarġjar tal-Apparat

To prolong battery life, it is recommended to fully charge the jump starter every 3-6 months, even if not in use. This prevents deep discharge and maintains battery health.

Ħażna

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. The operating temperature range is -20°C to 60°C (-4°F to 140°F), but for long-term storage, room temperature is ideal. Keep it in the provided soft cloth bag to protect it from dust and scratches.

Tindif

Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu. Kun żgur li l-portijiet kollha huma ħielsa mit-trab u l-fdalijiet.

Issolvi l-problemi

Protezzjonijiet tas-Sigurtà

Your BRPOM jump starter is equipped with a smart chip and external intelligent protector, offering 12 layers of safety protection:

• Protezzjoni ta 'tagħbija żejda
• Vol baxxtage Protezzjoni
• Protezzjoni ta 'Ċarġ ta' Temperatura Għolja
• Protezzjoni Short Circuit
• Protezzjoni ta 'Konnessjoni Reverse
• Protezzjoni ta' ħlas żejjed
• Vol Għolitage Protezzjoni
• Protezzjoni kontra l-Ħatt
• Protezzjoni b'lura tal-Polarità
• Protezzjoni Over Current
• Protezzjoni tar-Reverse Charge
• Protezzjoni ta 'Ċarġ ta' Temperatura Baxxa
• Spark-Proof Protection

If the device encounters an issue, these protections may activate, preventing operation. Check the display for error codes or indicators.

Image: Diagram illustrating the 12 safety protection features of the jump starter, ensuring safe operation.

Kwistjonijiet Komuni

• Apparat mhux qed jixgħel: Ensure the device is charged. If the battery is critically low, it may need a few minutes of charging before it can power on.
• Vehicle not jump-starting: Check that the jumper cables are correctly connected to the battery terminals (red to positive, black to negative). Ensure the clamps are making good contact. The vehicle battery might be severely damaged and require professional assistance.
• Il-kompressur tal-arja mhux qed jintefaħ: Verify the air hose and nozzle are securely attached. Check the set pressure and ensure the correct inflation mode is selected.
• Charging external devices slowly: Ensure the jump starter has sufficient charge. Some devices may draw more power than others.

Speċifikazzjonijiet

Image: Diagram showing the approximate dimensions of the jump starter unit.

Għajnuniet għall-Utent

• Kompatibilità mal-Muturi: The jump starter is suitable for motorcycles. Always check your motorcycle's battery voltage and engine displacement to ensure it falls within the device's specifications.
• Spazju tal-Ħażna: Qabel ix-xiriasing, consider the dimensions of the unit (approx. 22.67 cm L x 9.27 cm W x 4.90 cm H) to ensure it fits comfortably in your vehicle's storage compartment or glove box.
• Iċċarġjar regolari: For optimal readiness, keep the jump starter charged, especially if it's stored in your vehicle where temperatures can fluctuate.
• Nozzle Organization: Keep the various inflation nozzles organized in the provided bag to avoid losing them, ensuring you're ready for any inflation task.

Garanzija u Appoġġ

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty validation.