1. Prodott Aktarview
The Moa PT-2220E is a luxury instant hot water dispenser designed for household use. It features digital controls, a child safety lock, and a large LED display. With a 2.7L removable water tank, it dispenses water in 5-8 seconds, offering 5 different volume selections and 7 temperature settings, including specific functions for powdered milk, instant coffee, and tea. It also includes a scale cleaning function and safety features like boil dry and overheat protection.
2. Setup
- Spakkjar: Carefully remove the dispenser from its packaging. Retain all packaging materials for future transport or storage.
- Tindif Inizjali: Before first use, wipe the exterior of the dispenser with a damp cloth. Remove the water tank and drip tray, wash them with mild soap and water, then rinse thoroughly. Ensure all parts are dry before reassembling.
- Pjazzament: Place the dispenser on a stable, flat, heat-resistant surface, away from direct sunlight and heat sources. Ensure there is adequate ventilation around the unit.
- Imla t-Tank tal-Ilma: Fill the removable transparent water tank with clean, potable water. Do not exceed the maximum fill line. Securely place the water tank back into the dispenser.
- Konnessjoni tal-Enerġija: Plug the power cord into a grounded electrical outlet (220-240V, 50/60Hz). The LED display will illuminate.
- L-Ewwel Ċiklu ta' Użu: It is recommended to run a full cycle with cold water (or the lowest temperature setting) without dispensing into a cup to flush out any manufacturing residue. Repeat this process 2-3 times.
3. Istruzzjonijiet Operattivi
- Power On/Off: The unit powers on automatically when plugged in. Use the 'On/Off' button on the control panel to toggle the dispensing function.
- Serratura tas-Sikurezza tat-Tfal: The dispenser is equipped with a child safety lock. Activate or deactivate it as needed to prevent accidental dispensing of hot water. Refer to the display for lock status.
- Agħżel il-Volum tal-Ilma: Use the 'Volume' button to cycle through the available water volume selections: 000 (Continual Water), 100ML, 200ML, 300ML, 400ML. The selected volume will be shown on the LED display.
- Select Water Temperature: Use the 'Temperature' button to choose your desired water temperature: 000 (Normal Water Temp.), 45°C, 55°C, 65°C, 75°C, 85°C, 100°C. The selected temperature will be displayed.
- Dispensing Ilma: Place a cup or container on the drip tray. Press the 'Dispense' button (often labeled 'Start/Stop' or similar) to begin dispensing. The dispenser will heat and dispense water in 5-8 seconds. Press the button again to stop continual dispensing.
- Funzjonijiet Speċjali: The dispenser includes dedicated functions for 'Powdered Milk', 'Instant Coffee', and 'Tea'. Select these options for optimized temperature and volume settings for these beverages.
4. Manutenzjoni
- Tindif tat-Tank tal-Ilma: Regularly remove and clean the transparent water tank. Wash with mild soap and water, rinse thoroughly, and dry before refilling.
- Tindif tad-Dripp Tray: It-trej tat-taqtir għandu jitbattal u jitnaddaf regolarment biex jipprevjeni t-tifwir u tinżamm l-iġjene.
- Tindif ta' barra: Imsaħ il-barra tad-dispenser b'ċarruta ratba u damp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-unità fl-ilma.
- Scale Cleaning Function: The dispenser features a 'Scale Cleaning Function'. Follow the instructions on the display or in the full manual (if available) to perform descaling. This is crucial for maintaining performance and longevity, especially in areas with hard water.
5 Issolvi l-problemi
- Ebda Qawwa: Kun żgur li l-korda tal-enerġija hija pplaggjata sew f'sokit elettriku li jaħdem. Iċċekkja s-circuit breaker jekk meħtieġ.
- Ilma Mhux Qed Jingħata: Check if the water tank is properly seated and filled. Ensure the child safety lock is not activated.
- Ilma Mhux Sħun Biżżejjed: Verify the correct temperature setting has been selected. Allow a few seconds for the instant heating element to reach the desired temperature.
- Slow Dispensing/Reduced Flow: This may indicate scale buildup. Utilize the 'Scale Cleaning Function' as described in the Maintenance section.
- Non-working Reset Function: If the unit is not functioning correctly, unplug it from the power outlet for a few minutes, then plug it back in. This may reset internal systems. If issues persist, contact customer support.
6. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | PT-2220E |
| Kapaċità tat-Tank tal-Ilma | 2.7 Litri |
| Qawwa (W) | 2200-2600W |
| Voltage (V) | 220-240V, 50/60Hz |
| Dimensjonijiet (L x W x H) | 270 x 151 x 302 mm |
| Materjal tad-Djar | Plastic (ABS Plastic) |
| Water Dispensing Speed | 5-8 sekondi |
| Water Volume Selections | 000 (Continual), 100ML, 200ML, 300ML, 400ML |
| Water Temperature Selections | 000 (Normal), 45°C, 55°C, 65°C, 75°C, 85°C, 100°C |
| Karatteristiċi tas-Sigurtà | Child Safety Lock, Boil Dry & Overheat Protection, Non-working Reset Function |
| Approvazzjonijiet | GS/CE/EMC/CB/REACH/LFGB |
7. Għajnuniet għall-Utenti
- For best taste and to minimize scale buildup, consider using filtered water in your dispenser.
- Always ensure the drip tray is properly installed before dispensing to catch any spills.
- Regularly check the water level in the transparent tank to avoid running out during use.
- Utilize the child safety lock feature, especially in households with children, to prevent accidental burns.
- Perform the scale cleaning function as recommended to maintain heating efficiency and prolong the life of your appliance.
8. Garanzija u Appoġġ
For any questions, technical support, or warranty claims regarding your Moa PT-2220E Instant Hot Water Dispenser, please contact the seller or manufacturer directly.
Informazzjoni ta' Kuntatt:
- Email: 89530960@qq.com
- WhatsApp: +86 13810505604
Please have your model number (PT-2220E) and purchase details ready when contacting support.
