1. Prodott Aktarview
L-Ourlife 300Mbps Wireless WiFi Repeater is designed to extend the coverage of your existing wireless network, eliminating Wi-Fi dead zones and providing a strong, stable signal throughout your home or office. It supports 2.4G Wi-Fi with speeds up to 300Mbps and features strong wall penetration capabilities.

Figure 1: Ourlife 300Mbps Wireless WiFi Repeater with highlighted features.

Figure 2: The repeater providing 2.4G Wi-Fi at 300Mbps.
2. Kontenut tal-Pakkett
- 1 x Ourlife 300Mbps Wireless WiFi Repeater
- 1 x Manwal għall-Utent
- 1 x Kejbil tan-Netwerk RJ45
3. Istruzzjonijiet ta' Setup
3.1 Għażla ta' Post
Place the repeater in an area where it can receive a good signal from your main router and also effectively extend coverage to desired dead zones. Avoid placing it near large metal objects, concrete walls, or other devices that may cause interference.

Figure 3: Optimal placement for extending Wi-Fi coverage up to 9800 sq ft.
3.2 Tixgħel
Plug the repeater into a standard electrical outlet. The power indicator light should illuminate.

Figure 4: The repeater with its power plug.
3.3 Konfigurazzjoni Mgħaġġla tal-WPS
The easiest way to set up the repeater is using the WPS (Wi-Fi Protected Setup) function. Your host router must support WPS, and its SSID and password should be the same as the router's (special characters may not be supported).
- Agħfas il-buttuna WPS fuq ir-router prinċipali tiegħek.
- Within 2 minutes, press the WPS button on the Ourlife WiFi Repeater.
- Wait 1-2 minutes for the devices to connect. The signal indicator lights on the repeater should show a stable connection.

Figure 5: WPS Quick Setup steps.
3.4 Konfigurazzjoni Manwali (Web interface)
If your router does not support WPS or you prefer manual configuration, follow these steps:
- Plug the repeater into an electrical outlet.
- Connect your computer or mobile device to the repeater's default Wi-Fi network (usually named something like 'WiFi-Repeater' or 'Ourlife_EXT'). There is no password initially.
- Iftaħ a web browser and enter the default IP address (check the included manual or product label for the exact IP, commonly 192.168.1.1 or 192.168.0.1).
- Log in using the default username and password (often 'admin' for both).
- Follow the on-screen wizard to select your main Wi-Fi network and enter its password.
- Save the settings. The repeater will restart, and its network name will typically change to your main network's name with '_EXT' appended.
4. Operating the Repeater
Once set up, the repeater will automatically extend your Wi-Fi network. You can connect your devices to the extended network just as you would to your main router's Wi-Fi.
4.1 Indikaturi LED
The repeater features several LED indicators to show its status:
- LED tal-qawwa: Jindika jekk l-apparat huwiex mixgħul.
- WLAN LED: Jindika attività mingħajr fili.
- Signal LED(s): Shows the strength of the signal received from the main router. More lights usually mean a stronger signal.
- LED LAN: Indicates activity on the LAN port.

Figure 6: Repeater front panel with LED indicators.
4.2 Xenarji ta' Użu
L-Ourlife WiFi Repeater is suitable for various applications, including:
- Online gaming without lag.
- Streaming high-definition video.
- Video calls and online meetings.
- Ġenerali web browsing u email.

Figure 7: Various usage scenarios for the WiFi repeater.
5. Manutenzjoni
To ensure optimal performance and longevity of your WiFi Repeater:
- Żommha Nadif: Periodically wipe the device with a soft, dry cloth. Ensure ventilation holes are not obstructed.
- Aġġornamenti tal-Firmware: Iċċekkja l-manifattur website for any available firmware updates. Keeping the firmware updated can improve performance and security.
- Poġġiment xieraq: Evita li tpoġġi l-apparat fid-dawl tax-xemx dirett, ħdejn sorsi ta’ sħana, jew f’ambjenti umdi wisq.
- Erġa' ibda Perjodikament: Like most network devices, a periodic restart (unplugging and replugging after 10 seconds) can help maintain stable performance.
6 Issolvi l-problemi
- Ebda Aċċess għall-Internet:
- Kun żgur li r-router prinċipali tiegħek għandu konnessjoni tal-internet attiva.
- Verify that the repeater is successfully connected to your main router (check signal LEDs).
- Try restarting both your router and the repeater.
- Slow Speeds or Dropped Connection:
- Poor signal connection between the repeater and your main router can cause slow speeds or dropped connections. Try moving the repeater closer to your main router.
- Ensure there are no major obstructions (thick walls, large metal objects) between the repeater and your main router.
- Naqqas l-għadd ta' apparati konnessi man-netwerk estiż jekk possibbli.
- Cannot See Desired Wireless Network:
- If you cannot see the extended wireless network, the repeater might be out of range of your main router. Move the repeater closer to the router and scan for networks again.
- Ensure the repeater is powered on and its wireless function is enabled.
- Is-Setup tal-WPS ifalli:
- Ensure your host router supports WPS.
- Make sure the SSID and password of your host router do not contain special characters that might not be supported by WPS.
- Try the manual setup method via the web interface.
- Repeater Password Issues:
- The passwords for your repeater's extended network are typically the same as your main router's Wi-Fi password.
- If you changed the repeater's password during manual setup and forgot it, you may need to perform a factory reset and reconfigure.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Tip ta' Prodott | 300M WiFi Repeater |
| Kulur | Abjad |
| Tip ta' Ipplaggja | EU plug or US plug |
| Voltage | AC 110-240V |
| Sigurtà mingħajr fili | WPA/WPA2, WPA/WPA-PSK2 encryptions |
| Tip ta' Antenna | 2dBi fixed antennas |
| Netwerks | Wireless 2.4G; 1x 100M LAN port |
| Wi-Fi Standard | IEEE 802.11n/g/b, IEEE 802.11ac, IEEE 802.11a |
| Rata ta' Trażmissjoni tal-Wi-Fi 2.4G | 300 Mbps |
| Frekwenza Appoġġjata mill-Wi-Fi | 2.4G |
| Jappoġġja WPS | Iva |
| Portijiet WAN | 2 x 10/100Mbps |
| Portijiet tal-LAN | 2 |
| Funzjoni | Firewall |
| Applikazzjoni | Dar |
| Komunikazzjoni mingħajr fili Standard | 802.11.n |
| Klassi ta' Banda ta' Frekwenza | Banda Unika |
| Bil-Funzjoni tal-Modem | Iva |
| Tip | Wireless |
| Ċertifikazzjoni | CE, FCC, RoHS |
8. Għajnuniet għall-Utenti
- For optimal performance, ensure your main router's firmware is also up to date.
- If experiencing intermittent connectivity, try changing the Wi-Fi channel on your main router to avoid interference from neighboring networks.
- Consider using a wired connection via the LAN port for stationary devices like smart TVs or gaming consoles to free up wireless bandwidth.
9. Garanzija u Appoġġ
This product is certified with CE, FCC, and RoHS standards, ensuring compliance with health, safety, and environmental protection regulations. For technical support or warranty inquiries, please refer to the contact information provided by your retailer or the manufacturer's official websit.





