Manwal tal-Utent tal-Kontrollur tal-Logħob Wireless ECHTPower

Introduzzjoni

This manual provides detailed instructions for the setup, operation, and maintenance of your ECHTPower Wireless Game Controller (Model EP01). Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

The ECHTPower EP01 is a versatile wireless gamepad featuring Hall Effect joysticks, a 1000Hz polling rate, and multi-platform compatibility for PC, Nintendo Switch, iOS, and Android devices. It includes customizable RGB lighting, adjustable turbo functions, and vibration feedback for an enhanced gaming experience.

Kontenut tal-Pakkett

Kun żgur li l-oġġetti kollha huma preżenti fil-pakkett:

• Wireless Controller x 1
• Iċċarġjar Cable x 1
• Riċevitur x 1
• Manwal ta' Istruzzjoni x 1

A visual representation of the package contents:

Image: ECHTPower Wireless Gamepad, USB receiver, and charging cable.

Speċifikazzjonijiet

Layout tal-Kontrollur

Familiarize yourself with the buttons and ports on your controller:

Immaġni: Quddiem view of the controller with labels for Left Joystick/L3, D-pad, Back Button, Home Button, Start Button, Share Button, A/B/X/Y Buttons, M Button, Right Joystick/R3.

Immaġni: Fuq view of the controller with labels for RB Button, LB Button, RT Button, LT Button, and Type-C Charging port.

Immaġni: Wara view of the controller with labels for Reset Button and Mode Switch (F/BT/NS).

Setup u Konnessjoni

Wireless Receiver Connection (PC)

1. Ipplaggja r-riċevitur USB f'port USB disponibbli fuq il-kompjuter tiegħek.
2. Set the back mode switch on the controller to the 'F' position (2.4G wireless mode).
3. Press the HOME button on the controller. The controller will automatically connect, and the HOME button light will turn green.
4. For subsequent use, simply press the HOME button to reconnect the controller.

Image: Steps for connecting the controller to a PC using the wireless USB receiver.

Wired Connection (PC)

• Set the back mode switch to 'F' or 'BT' or 'NS'.
• Connect the controller to your PC using the provided USB-C cable.
• If the HOME button light is green, the connection is successful.

Bluetooth Connection (PC)

1. Set the back mode switch to the 'BT' position (Bluetooth mode).
2. Press and hold the HOME button for 3 seconds until the green light flashes quickly.
3. On your computer, enable Bluetooth and connect to "Xbox Wireless Controller".
4. After successful connection, the green indicator light on the controller will turn on.
5. For subsequent use, simply press the HOME button to reconnect the controller.

*Note: After connecting to PC via Bluetooth, you can press and hold the 'Back' and 'Start' buttons simultaneously to switch to Dinput mode for retro emulator games. The yellow light will blink in Dinput mode. You may need to reconnect for the first time Dinput connection.

Qabbad ma' Nintendo Switch

1. On the Switch home page, navigate to "Controllers" then "Change Grip/Order".
2. Set the back mode switch on the controller to the 'NS' position (Nintendo Switch mode).
3. Press and hold the HOME button until the white indicator light blinks quickly.
4. Follow the on-screen prompts on the Switch interface to connect. The white indicator light will remain on after successful connection.
5. For subsequent use, simply press the HOME button to reconnect and wake up your Switch.

In Switch mode, the key mapping is as follows: Y=X, X=Y, B=A, A=B. The Screenshot button functions as the screenshot button, and the Home button functions as the Home button.

Qabbad ma 'Apparati iOS

1. Set the back mode switch to the 'BT' position (Bluetooth mode).
2. Press and hold the HOME button for 3 seconds. The green light will blink quickly. (If the yellow light blinks, press and hold 'Back' + 'Start' until the green light blinks).
3. On your iOS device, open Bluetooth settings and connect to "Xbox Wireless Controller".
4. After successful connection, the green indicator light on the controller will turn on.
5. For subsequent use, simply press the HOME button to reconnect the controller.

Qabbad ma 'Apparat Android

1. Set the back mode switch to the 'BT' position (Bluetooth mode).
2. Press and hold the HOME button for 3 seconds. The green light will blink quickly. Then press and hold 'Back' + 'Start' until the yellow light blinks quickly.
3. On your Android device, open Bluetooth settings and connect to "ECHTPower EP01".
4. After successful connection, the yellow indicator light on the controller will turn on.
5. For subsequent use, simply press the HOME button to reconnect the controller.

Istruzzjonijiet Operattivi

Funzjonijiet Bażiċi

• Qawwa Mixgħul: Agħfas il-buttuna HOME.
• Itfi: Switch the back mode switch, or the controller will shut down automatically after 30 minutes of inactivity.
• Indikatur tal-Batterija Baxxa: The HOME button indicator will blink red slowly.
• Indikatur tal-Iċċarġjar: The HOME button indicator will blink slowly while charging.
• Irrisettja: Insert a sim-card tool (or similar thin object) into the reset hole on the back of the controller to reset.

Funzjoni TURBO

The Turbo function allows for rapid, repeated input of a button press.

• Buttuni Appoġġjati: A, B, X, Y, D-pad, LB, RB, LT, RT.
• Turbo manwali: Press the M button and the desired button simultaneously to activate manual turbo. The controller will vibrate once to confirm.
• Auto Turbo: With manual turbo already set, press the M button and the same button again to activate auto turbo. The controller will vibrate once to confirm.
• Itfi Turbo: With auto turbo already set, press the M button and the same button again to disable the turbo function. The controller will vibrate once to confirm.
• Aġġustament tal-Veloċità Turbo: Press and hold the M button, then push the left joystick left or right to adjust the turbo speed (Fast/Medium/Slow). The HOME button light will blink according to the set turbo speed.

Aġġustament tal-Vibrazzjoni

Adjust the intensity of the vibration feedback:

• Press and hold the M button, then push the left joystick up or down to adjust the vibration level (Strong/Medium/Weak/Off). There are 4 levels.

Brightness Adjustment (RGB Ring)

Adjust the brightness of the RGB lighting rings around the joysticks:

• Press and hold the M button, then push the right joystick up or down to increase or decrease the RGB ring brightness (Strong/Medium/Weak/Off). There are 4 levels.

Light Mode Adjustment (RGB Ring)

Change the lighting effects and colors of the RGB rings:

1. Press and hold the M button, then press the R3 button (right joystick press) to cycle through RGB modes:
   • Trigger-Tracing Mode: RGB brightness changes with trigger input.
   • Modalità Solida: Dawl kostanti.
   • Mod tan-nifs: Pulsating light.
   • Flowing Mode: Dynamic color flow (color cannot be changed in this mode).
2. In any mode (except Flowing Mode), press and hold the M button, then push the right joystick left to change the color of the RGB ring. Colors cycle through: Colorful, Red, Orange, Yellow, Green, Cyan, Blue, Purple, Off.

Video: Demonstrates the RGB lighting effects, turbo function, and vibration adjustment of the controller.

Issolvi l-problemi

• Il-kontrollur mhux qed jikkonnettja:
  • Ensure the mode switch on the back of the controller is set to the correct position (F for 2.4G, BT for Bluetooth, NS for Switch).
  • For wireless connections, ensure the receiver is properly plugged into the device.
  • For Bluetooth, ensure Bluetooth is enabled on your device and the controller is in pairing mode (flashing light).
  • Try resetting the controller by inserting a thin object into the reset hole.
  • Kun żgur li l-kontrollur ikun iċċarġjat.
• Input lag or dropped connections:
  • Ensure the controller is within range of the receiver or Bluetooth device.
  • Imminimizza l-interferenza minn apparati oħra mingħajr fili.
  • For PC, try using a wired connection if wireless performance is inconsistent.
• Joysticks drifting:
  • The controller uses Hall Effect joysticks, which are designed to prevent drift. If you experience drift, try resetting the controller.
  • Kun żgur li l-firmware tal-kontrollur huwa aġġornat (iċċekkja l-firmware tal-manifattur) webis-sit għal aġġornamenti).
• Buttuni li ma jirrispondux:
  • Kun żgur li l-kontrollur huwa konness sew.
  • Test buttons in different games or system menus to isolate the issue.
  • Ipprova agħmel reset tal-kontrollur.

Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf il-kontrollur. Tużax kimiċi ħarxa jew materjali li joborxu.
• Ħażna: Aħżen il-kontrollur f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
• Kura tal-batterija: Biex ittawwal il-ħajja tal-batterija, evita li tiċċarġja kompletament il-kontrollur ta' spiss. Iċċarġjah regolarment, anke jekk ma tkunx qed tużah għal perjodi twal.
• Evita Qtar: Handle the controller with care to prevent damage from drops or impacts.

Twissijiet ta' Sigurtà

• This product contains small detachable parts. Keep it away from children under 3 years old to prevent choking hazards.
• Do not use this product near fire or high heat sources.
• Tiżżarmax jew timmodifikax il-prodott. Modifiki mhux awtorizzati jistgħu jannullaw il-garanzija u joħolqu riskji għas-sigurtà.
• Tpoġġix dan il-prodott f'ambjent umdu jew taċ-ċpar.
• Do not use this product for purposes other than its intended design.
• Dispose of the product and its parts according to local environmental laws and guidelines. Do not dispose of it as household waste.

For more detailed safety and compliance information, please refer to the full user manual available as a PDF: Manwal għall-Utent (PDF).

Kuntatt u Appoġġ

For technical support, warranty information, or other inquiries, please contact:

• Telefon: 0755-21010839
• Email: servizz@echtpower.com
• Websit: www.echtpower.com
• Manifattur: Shenzhen Mike Morgen Technology Co., Ltd
• Indirizz: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A88F-ES01.