MJX 20208 Hyper Go 1/20 RC Off-Road Truck Instruction Manual

1. Introduzzjoni

Congratulations on your purchase of the MJX 20208 Hyper Go 1/20 RC 4WD High-Speed Off-Road Truck. This model features a powerful brushless motor, a 35A ESC with a 2-in-1 circuit board, and full-scale remote control capabilities, designed for thrilling off-road adventures. This manual provides essential information for setting up, operating, and maintaining your RC truck to ensure optimal performance and longevity.

2. X'hemm fil-Kaxxa

Jekk jogħġbok iċċekkja l-kontenut tal-pakkett tiegħek biex tiżgura li l-oġġetti kollha huma preżenti:

• RC Car Body (including pre-installed battery) x 1
• Operating Instructions Manual x 1
• Cable tal-Iċċarġjar tal-USB x 1
• Tornavit x 1
• Kontrollur mill-bogħod x 1

3. Speċifikazzjonijiet

4. Informazzjoni dwar is-Sigurtà

• TWISSIJA: Mhux adattat għal tfal taħt it-36 xahar minħabba partijiet żgħar.
• Always operate the RC car in open, unobstructed areas, away from people, pets, and obstacles.
• Do not operate near roads, water, or high-voltage linji tal-enerġija.
• Ensure the battery is fully charged before use and never overcharge.
• Dejjem skonnettja l-batterija mill-karozza meta ma tkunx qed tużaha.
• Tesponix il-batterija għal temperaturi estremi jew dawl tax-xemx dirett.
• Issorvelja t-tfal waqt l-operazzjoni.
• Avoid touching moving parts during operation to prevent injury.
• Itfi l-karozza RC u l-kontroll remot meta ma tkunx qed tużahom.

5. Gwida ta' Setup

5.1. Iċċarġjar tal-Batterija tal-Karozza

1. Connect the included USB charging cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
2. Connect the other end of the USB charging cable to the Li-Po SF 7.4V 850mAh battery.
3. The charging indicator on the USB cable will show the charging status (refer to the charger's specific indicator behavior, usually red for charging, green for full).
4. Charge the battery until fully charged. A full charge typically takes approximately 1.5-2 hours. Do not leave charging unattended.

5.2. Installazzjoni ta 'batteriji tal-kontroll mill-bogħod

1. Iftaħ il-kompartiment tal-batterija fuq wara tal-kontrollur remot.
2. Daħħal 2 batteriji AA (mhux inklużi) fil-kompartiment, waqt li tiżgura l-polarità korretta (+/-).
3. Agħlaq il-kompartiment tal-batterija sew.

5.3. Installing the Car Body

The MJX 20208 features clipless body mounting for easy access. Simply align the body with the chassis and press down until it securely snaps into place.

5.4. Binding the Remote Control

1. Ensure the car battery is charged and connected to the car.
2. Turn on the remote control. The indicator light should flash.
3. Turn on the RC car. The car's indicator light should also flash.
4. Wait a few seconds for the remote control and car to automatically bind. Once bound, both indicator lights will become solid.
5. Test the steering and throttle to confirm successful binding.

6. Istruzzjonijiet Operattivi

6.1. Funzjonijiet ta 'Kontroll mill-bogħod

• Stering: Turn left or right to control the direction of the car.
• Trigger tat-throttle: Iġbed biex taċċellera 'l quddiem, imbotta biex tibbrejkja/reġġa' lura.
• Aġġustamenti tat-Trim: Use the trim dials on the remote to fine-tune steering and throttle if the car doesn't drive straight or stops when the trigger is neutral.

6.2. Pariri dwar is-Sewqan

• Start with gentle throttle inputs to get a feel for the car's speed and handling.
• Practice steering in wide open spaces before attempting tighter maneuvers.
• The 4WD system and all-terrain tires provide excellent traction on various surfaces, including dirt, grass, and gravel.
• The LED lights enhance visibility during low-light conditions.

7. Manutenzjoni

7.1. Tindif

• After each use, especially off-road, clean the car to remove dirt, dust, and debris.
• Uża xkupilja artab jew arja kkompressata biex tnaddaf iż-żoni diffiċli biex jintlaħqu.
• Imsaħ il-ġisem b'adamp drapp. Tużax kimiċi ħarxa jew solventi.
• Kun żgur li ma tidħol l-ebda umdità fil-komponenti elettroniċi.

7.2. Kura tal-batterija

• Always store the Li-Po battery in a cool, dry place, away from direct sunlight and heat.
• Għal ħażna fit-tul, iċċarġja l-batterija sa madwar 50% tal-kapaċità tagħha.
• Never fully discharge the Li-Po battery, as this can damage it.

7.3. Verifiki tal-Komponenti

• Regularly inspect the oil-filled shocks for leaks or damage.
• Check the metal differential and bearings for smooth operation and any signs of wear.
• Kun żgur li l-viti u l-qafliet kollha huma ssikkati.
• Inspect the all-terrain tires for wear and tear.

8 Issolvi l-problemi

• Il-karozza ma tirrispondix:
  • Check if both the car and remote control are powered on.
  • Ensure the car battery is charged and properly connected.
  • Re-bind the remote control and car (refer to Section 5.4).
  • Iċċekkja l-batteriji tal-kontroll mill-bogħod.
• Short run time:
  • Ensure the car battery is fully charged before use.
  • Battery performance can decrease over time; consider replacing if significantly degraded.
• Poor performance/lack of power:
  • Check for debris obstructing moving parts.
  • Kun żgur li l-konnessjonijiet kollha huma siguri.
  • The brushless motor and ESC are designed for high performance; if issues persist, contact support.

9. Għajnuniet għall-Utenti

• Always fully charge the car battery before its first use to maximize battery life.
• Operate your RC truck in spacious, open environments to fully enjoy its speed and maneuverability.
• Avoid operating the vehicle in wet conditions or through puddles, as water can damage electronic components.
• Regularly check the tightness of wheels and other accessible screws to prevent parts from loosening during high-speed operation.

10. Garanzija u Appoġġ

For any technical assistance, replacement parts, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.