1. Introduzzjoni
Thank you for choosing the JONSBO ZA Series ARGB Chassis Fan. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new fan. The ZA series features advanced ARGB lighting synchronization, PWM fan speed control, and a durable design for optimal PC cooling and aesthetics. Key features include a four-sided thousand-layer mirror light effect, easy installation with a joint structure, simplified one-line connection to the motherboard, and an aluminum CD pattern nameplate.
Image: JONSBO ZA Series ARGB Fans (120mm, 240mm, 360mm) and an example installation in a PC case.
2. Informazzjoni dwar is-Sigurtà
Please read and understand the following safety precautions before installing or operating the fan:
- Ensure your computer system is powered off and unplugged from the wall outlet before installation to prevent electric shock.
- Handle the fan and its components with care to avoid damage.
- Do not touch the fan blades while the fan is operating.
- Keep the fan away from liquids and excessive moisture.
- Only use the provided cables and connectors. Using incompatible cables may cause damage.
- Ensure proper ventilation around the fan to prevent overheating.
3. Kontenut tal-Pakkett
Il-pakkett tipikament jinkludi l-oġġetti li ġejjin:
- JONSBO ZA Series ARGB Fan(s) (ZA-120, ZA-240, or ZA-360 model as purchased)
- Viti tal-Immuntar
- PWM 4-pin cable
- ARGB 3-pin 5V cable
- Manwal għall-Utent (dan id-dokument)
4. Speċifikazzjonijiet
The JONSBO ZA Series fans are available in various sizes and configurations. Please refer to the table below for detailed specifications:
| Karatteristika | ZA-120B / ZA-240B / ZA-360B (Forward) | ZA-120BR / ZA-240BR / ZA-360BR (Reverse) |
|---|---|---|
| Daqs tal-fann | 120(L)*120(W)*28(H)mm / 242(L)*123(W)*28(H)mm / 362(L)*123(W)*28(H)mm | 120(L)*120(W)*28(H)mm / 242(L)*123(W)*28(H)mm / 362(L)*123(W)*28(H)mm |
| Veloċità tal-fann | 700-2400 (±10%) RPM | 700-1800 (±10%) RPM |
| Volum tal-Arja | 21.46-62.40 CFM | 19.46-44.58 CFM |
| Pressjoni tar-Riħ | 0.49-2.46 mmH2O | 0.29-1.71 mmH2O |
| Livell ta' Storbju | 21.3-37.3 dB(A) | 17.3-31.6 dB(A) |
| Vol ikklassifikattage | FAN: 12V, LED: 5V | FAN: 12V, LED: 5V |
| Rated Current (FAN) | ZA-120B: 0.22A, ZA-240B: 0.43A, ZA-360B: 0.61A | ZA-120BR: 0.13A, ZA-240BR: 0.25A, ZA-360BR: 0.35A |
| Rated Current (LED) | ZA-120B: 0.71A, ZA-240B: 1.16A, ZA-360B: 1.35A | ZA-120BR: 0.71A, ZA-240BR: 1.16A, ZA-360BR: 1.35A |
| Power Waste (FAN) | ZA-120B: 2.64W, ZA-240B: 5.16W, ZA-360B: 7.32W | ZA-120BR: 1.56W, ZA-240BR: 3.00W, ZA-360BR: 4.20W |
| Power Waste (LED) | ZA-120B: 3.55W, ZA-240B: 5.80W, ZA-360B: 6.75W | ZA-120BR: 3.55W, ZA-240BR: 5.80W, ZA-360BR: 6.75W |
| Fan Bearings | Hydraulic Bearings (Fluid Bearing) | |
| Fan Life (MTTF) | ≥20000h (Room Temp: 25 ℃) | |
| Interface | PWM 4PIN, ARGB 3PIN (5V) | |
| Kwantità tax-xafra | 9 | |
| Użat Għal | Case, Radiator | |
| Numru ta 'żibeġ LED | ZA-120: 32 (around) + 9 (parallel axis) ZA-240: 52 (around) + 18 (parallel axis) ZA-360: 68 (around) + 27 (parallel axis) | ZA-120: 32 (around) + 9 (parallel axis) ZA-240: 52 (around) + 18 (parallel axis) ZA-360: 68 (around) + 27 (parallel axis) |
Nota: ZA-360 fans require your motherboard or controller to support at least 68 LED chips for full ARGB functionality. Some motherboards allow adjusting the number of LED chips.
Image: Detailed specification tables for ZA-120 and ZA-240 series fans.
Image: Detailed specification table for ZA-360 series fans.
Image: Performance characteristics for forward and reverse fan blades, highlighting noise, RPM, and airflow.
5. Gwida għall-Installazzjoni
Follow these steps to properly install your JONSBO ZA Series ARGB fan(s):
- Ipprepara s-Sistema Tiegħek: Power off your computer and unplug it from the power source. Open your PC case to access the fan mounting locations.
- Mount the Fan(s):
- Position the fan(s) in your desired location (chassis fan mounts or radiator).
- Secure the fan(s) using the provided mounting screws. The fans are designed for easy installation with 4 screws.
- Note the fan direction: "Forward" fans push air in one direction, "Reverse" fans pull air in the opposite direction. Choose based on your desired airflow. Refer to the image below for visual guidance on air direction.
- Qabbad l-Enerġija (PWM): Connect the 4-pin PWM cable from the fan to an available 4-pin fan header on your motherboard. This allows for fan speed control.
- Qabbad id-Dawl ARGB:
- Connect the 3-pin 5V ARGB cable from the fan to an available 3-pin 5V ARGB header on your motherboard or a compatible ARGB controller.
- The 5V ARGB plug features male and female designs, allowing you to daisy-chain multiple fans or other ARGB devices in series for synchronized lighting.
- Importanti: For ZA-360 fans, ensure your motherboard or controller supports at least 68 LED chips. Some motherboards allow you to adjust this setting in the BIOS or software.
- Ġestjoni tal-Kejbil: Route cables neatly to ensure good airflow and a clean chassis interior.
- Kontroll Finali: Double-check all connections before closing your PC case and powering on the system.
Image: Simplified wiring for multiple fans, showing connection to motherboard.
Image: Airflow direction for standard (positive) and reverse fan blades.
6. Istruzzjonijiet Operattivi
6.1 Fan Speed Control (PWM)
The 4-pin PWM connector allows your motherboard to dynamically control the fan speed based on system temperature. You can typically adjust fan curves and profiles through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV).
6.2 Kontroll tad-Dawl ARGB
The JONSBO ZA Series fans feature Addressable RGB (ARGB) lighting, allowing for vibrant and customizable lighting effects. To control the lighting:
- Ensure the 3-pin 5V ARGB cable is correctly connected to your motherboard's ARGB header or a compatible ARGB controller.
- Use your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize the lighting effects. These fans are designed for motherboard lighting synchronization, offering over 16 million color effects.
- If using an external ARGB controller, refer to the controller's manual for lighting adjustment instructions.
Image: Illustration of ARGB lighting synchronization and a software interface for controlling light effects.
Image: Guide to using the illusionary light effect, showing software settings and the 5V ARGB connection.
7. Manutenzjoni
Regular maintenance helps ensure optimal performance and longevity of your fans:
- Tindif: Periodically clean dust from the fan blades and frame using compressed air or a soft, dry cloth. Ensure the system is powered off and unplugged before cleaning.
- Spezzjoni: Check cables for any signs of wear or damage. Ensure all connections are secure.
- Avoid Lubrication: The hydraulic bearings are sealed and do not require external lubrication.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Fann mhux għażil |
|
|
| ARGB lighting not working or incorrect colors |
|
|
| Storbju eċċessiv mill-fann |
|
|
9. Għajnuniet għall-Utenti
- Ottimizzazzjoni tal-Fluss tal-Arja: Plan your case airflow carefully. Use "Forward" fans for intake (pulling air into the case) and "Reverse" fans for exhaust (pushing air out of the case) or for specific radiator configurations where the fan is visible from the intake side but needs to exhaust.
- Daisy-Chaining ARGB: Ħu bil-quddiemtage of the male and female ARGB connectors to connect multiple fans in series, simplifying cable management and ensuring synchronized lighting across all connected devices.
- Kompatibbiltà tal-motherboard: Always verify your motherboard's ARGB header type (5V 3-pin) and its maximum LED chip support, especially for larger fan arrays like the ZA-360, to ensure full lighting functionality.
- Kontroll tas-Softwer: Explore your motherboard's ARGB and fan control software to customize lighting effects and fan speed curves for optimal performance and aesthetics.
10. Garanzija u Appoġġ
JONSBO products are manufactured to high-quality standards. For any issues or support inquiries, please contact the seller, MIddle999 Store, or refer to the official JONSBO website for warranty details and technical assistance.
Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.
