1. Introduzzjoni
The LANDTEK ATP-100 Digital ATP Fluorescence Detector is a precision instrument designed for rapid detection of Adenosine Triphosphate (ATP) fluorescence. It is widely used in various fields including food safety, medicine and health, daily chemical production, papermaking, industrial water treatment, national defense, environmental protection, water administration, and customs entry/exit quarantine departments. This manual provides essential information for the proper setup, operation, and maintenance of your ATP-100 meter.
2. Setup
2.1 Disimballaġġ
Carefully unpack the ATP-100 meter and all accessories. Verify that all items listed in the 'Standard Accessories' section of this manual are present and undamaged. The standard accessories include the main unit and a carrying case (B04).
2.2 Installazzjoni tal-batterija
The ATP-100 meter is powered by two 1.5V AA (UM-3) batteries. To install the batteries:
- Sib il-kompartiment tal-batterija fuq wara tal-apparat.
- Iftaħ il-kompartiment tal-batterija.
- Daħħal żewġ batteriji AA ta' 1.5V, waqt li tiżgura l-polarità korretta (+/-).
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
3. Istruzzjonijiet Operattivi
The ATP-100 features a simple interface for ease of use. The device utilizes bottom detection, which ensures stable and accurate results, unaffected by the instrument's holding or placement angle.
3.1 Operazzjoni Bażika
- Qawwa Mixgħul: Agħfas il- QAWWA buttuna biex tixgħel l-apparat.
- Agħżel il-Modalità: Uża l- AGĦŻEL button to switch between RLU (Relative Luminous Unit) or Coliform screening modes.
- Issettja l-Parametri: Il- SET u ĦIN buttons are used to adjust various parameters, such as the testing time (which can be set between 1 and 60 seconds) or to set limit numbers (more than 1000 possible settings).
- Agħmel it-Test: Insert the test swab into the detection chamber and press the TEST button to initiate a measurement.
- View Riżultati: The results will be displayed on the screen after the testing time is complete.
- Trasferiment tad-Data: Test results can be transferred to a PC via the USB port for further analysis and record-keeping.
3.2 Understanding Results
The device displays results in Relative Luminous Units (RLU) or provides a Coliform screening result, depending on the selected mode. A significantly low background value (≤1RLU) ensures accurate detection of trace ATP.
4. Manutenzjoni
To ensure the longevity and accuracy of your ATP-100 meter, follow these maintenance guidelines:
- Żomm l-apparat nadif u niexef. Imsaħ il-barra b'ċarruta ratba u niexfa.amp drapp. Tużax tindif jew solventi li joborxu.
- Ensure the detection chamber is free from dust and debris.
- Store the meter in its carrying case (B04) when not in use to protect it from physical damage and environmental factors.
- Replace batteries promptly when the low battery indicator appears to prevent data loss or operational issues.
5 Issolvi l-problemi
If you encounter any issues with your LANDTEK ATP-100 meter, please refer to the following basic troubleshooting steps:
- L-apparat ma jixgħelx: Iċċekkja l-installazzjoni tal-batterija u kun żgur li l-batteriji mhumiex eżawriti. Ibdel jekk meħtieġ.
- Qari mhux preċiż: Ensure the test swabs are correctly inserted and not expired. Verify the detection chamber is clean.
- Kwistjonijiet ta' trasferiment tad-dejta: Check the USB cable connection and ensure the correct software/drivers are installed on your PC.
Għal problemi persistenti jew kwistjonijiet li mhumiex koperti hawn, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
6. Speċifikazzjonijiet
| Parametru | Valur |
|---|---|
| Preċiżjoni | 4X10-18 mol ATP |
| Limitu ta 'Sejbien | ≤1.0 CFU/ml |
| Firxa ta 'Sejbien | 0RLU~9999 RLU (Relative Luminous Unit) |
| Koliformi Fekali | ≥1 × 10-6 CFU |
| Ħin tal-Ittestjar | 1 second - 60 seconds |
| Testing Interference | ±2% or ±2 RLUs |
| Background Value | ≤1RLU |
| Check Out Mode | RLU or Coliform screening |
| Limit Number Can Be Set | Aktar minn 1000 |
| Daqs tal-Ħażna | More than 3000 records |
| Test Results Output | USB port for PC transfer |
| Daqs (W×H×D) | 199mm × 76mm × 37mm |
| Piż (batterija inkluża) | 265 g |
| Firxa tat-Temperatura Operattiva | 0℃ ~ 40℃ |
| Firxa ta 'Umdità Relattiva | 20% - 85% |
| Continuous Degree | 600 |
| Provvista tal-Enerġija | 2x 1.5V AA (UM-3) battery |
| Aċċessorji Standard | Main Unit, Carrying Case (B04) |
| Aċċessorji Fakultattivi | Test Swabs, RS-232C Data Cable with Software |
7. Għajnuniet għall-Utenti
Filwaqt li ma ngħataw l-ebda pariri speċifiċi għall-utent minn reviewjew Q&A, hawn xi rakkomandazzjonijiet ġenerali għall-aħjar użu:
- Always use fresh, unexpired test swabs for accurate results.
- Calibrate the device regularly according to manufacturer recommendations, if applicable, to maintain precision.
- Keep a log of your measurements for trend analysis and quality control.
8. Garanzija u Appoġġ
Specific warranty information for the LANDTEK ATP-100 is not explicitly provided in the product details. For any warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for any support requests.
