Tuya Wifi Smoke Sensor User Manual

1. Prodott Aktarview

The Wireless Smoke Alarm is an essential component of your home security system, integrating a Wi-Fi networking module with a photoelectric smoke fire detection alarm. Upon detecting smoke, the device promptly emits audible and visual alarm signals and transmits alarm notifications to your mobile phone via the associated application.

For a detailed user manual in PDF format, please refer to the Manwal għall-Utent (PDF).

2. Features and Performance Characteristics

• Installazzjoni faċli: Features Wi-Fi wireless communication and a built-in battery, eliminating the need for complex wiring and simplifying installation.
• Monitoraġġ f'ħin reali: Provides immediate smoke alarm and low power fault alerts.
• Sigurtà Mtejba: Rapid wireless reporting of smoke alarms ensures quick and timely fire response.
• Konvenjenza: Internet-based operation and management allow users to monitor fire safety via the mobile app anytime, anywhere.
• Disinn Professjonali: Fast perception of fire, ensuring high sensitivity to smoke and temperature, reducing false positives, and improving alarm accuracy.
• App Push Notifications and Control: Compatible with Smart Life and Tuya App for timely detection of fire or smoke and real-time notifications to your smartphone.
• Disinn ta' Enerġija Baxxa: Long battery life with a low voltage monitoring prompt function.

3. Applied Range

This smoke sensor is suitable for various environments, including schools, hospitals, commercial residences, clubs, hotels, restaurants, nursing homes, welfare institutions, museums, and other similar locations.

4. Speċifikazzjonijiet Tekniċi

5. Installazzjoni u Setup

5.1 Ambjent ta' Installazzjoni

For general use, if the ceiling height is below 6m, the protection area is 20m². The alarm should be installed on the ceiling.

5.2 Metodu ta 'Installazzjoni

1. Make two mounting holes 60mm apart on the ceiling. Fix the device base using the provided expansion plugs and screws.
2. Rotate the alarm counterclockwise to remove the base. Insert the batteries into the battery compartment at the bottom of the alarm, ensuring correct polarity as indicated by the battery buckle direction.
3. Press and hold the self-test button. The alarm indicator should light up and emit an alarm sound, indicating normal operation. If abnormal, check battery installation or voltage (taħt 2.6V).
4. After testing, rotate the detector clockwise onto the base until it is securely tightened.

5.3 Network Configuration (Tuya App)

The device connects directly to your Wi-Fi network, no gateway required.

1. Niżżel l-App: Fittex għal "Smart Life" or "Tuya Smart" in your app store or scan the QR code provided in the full PDF manual to download the application. Register and log in.
2. Ipprepara għat-Tqabbil: Connect your mobile phone to a 2.4GHz Wi-Fi network and enable Bluetooth.
3. Daħħal il-Mod tat-Tqabbil: Long press the "TEST" button on the smoke sensor for 5 seconds. Release it when the LED indicator flashes and a "beep" sound is heard. The device is now in network configuration state.
4. Żid Apparat fl-App: Open the "Smart Life" APP. Press the "+" button in the top right corner to add a device.
5. Select Sensor Type: Slide down the screen to refresh the device list or manually select "Sensors" then "Sensor (BLE+Wi-Fi)".
6. Indikatur ta' Konferma: The app will prompt you to confirm the indicator status. Select "Blink Quickly".
7. Qabbad mal-Wi-Fi: Enter your 2.4GHz Wi-Fi network password and press "Next". The app will begin searching for and adding the device.
8. Tlestija: Once the device is successfully added, press "Done". The app will switch to the main interface, showing your smoke sensor.

6. Istruzzjonijiet Operattivi

1. Standby: In normal standby state, the red LED flashes once every 60 seconds.
2. Allarm tad-duħħan: When smoke particles reach the alarm threshold, the device enters alarm mode. The buzzer emits a "beep, beep, beep" sound, the red LED indicator flashes, and the APP sends a smoke alarm warning to your phone. The alarm ceases when smoke concentration falls below the threshold.
3. Funzjoni Mute: During an alarm, a brief press of the test key activates mute mode. The red LED indicator flashes, and the mute period lasts approximately 10 minutes. Twissija: Ensure you use the mute function only in a safe state.
4. Twissija ta' Enerġija Baxxa: The red LED indicator flashes once every 55 seconds, accompanied by a "beep" sound, indicating low battery. The APP will display a low power warning, and your mobile phone will receive a push notification. Replace the battery within 7 days.
5. Alarm Testing: Press the test key once to trigger a sound and light alarm (red LED flashing and buzzer sound). The APP will also send a test alarm notification. This confirms the buzzer, battery, and Wi-Fi module are functioning correctly.

7. Manutenzjoni

• If a fault occurs during use, contact the supplier immediately. Do not attempt to disassemble or repair the device yourself to prevent accidents.
• If the alarm will not be used for an extended period, remove it, take out the batteries, and store it in its original packaging in a ventilated and dry place.

8 Issolvi l-problemi

9. Għajnuniet għall-Utenti

• Remote Muting: If the alarm is triggered, you can silence it directly from the Smart Life or Tuya app on your smartphone. This is useful for quickly managing false alarms or during testing.

10. Trasport u Ħażna

• During transportation and storage, ensure the original packaging and manufacturer's sealing remain intact. Protect the product from severe impacts.
• The stacking height of packaged units should not exceed 6 layers. For unpacked single units, the stacking height should not exceed 5 layers.

11. Kontenut tal-Pakkett

• Wireless Smoke Alarm Device: 1
• Installation Base: 1
• Viti: 2
• Expansion Plugs: 2
• AA Batteries: 2 (may not be included in all packages, please check product description)
• Manwal għall-Utent: 1

12. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija, appoġġ tekniku, jew mistoqsijiet dwar is-servizz, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek jew lill-manifattur direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.