Introduzzjoni
The Mychway MS-45T2SB S-Shape Cavitation Machine is a multi-functional beauty device designed for body contouring, skin tightening, and anti-aging facial treatments. It integrates several advanced technologies including 30KHz ultrasonic cavitation, Radio Frequency (RF), Electrical Muscle Stimulation (EMS), Electroporation (EL), and Lipo Laser pads to provide comprehensive aesthetic solutions. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device.
Video: Product display of the Mychway MS-45T2SB S-Shape Cavitation Machine, showcasing its main unit, 4-in-1 ultrasound handles, vacuum knob, and other product details.
X'hemm fil-Kaxxa
Carefully unpack your S-Shape Cavitation Machine and verify that all components are present and in good condition. The package should include:
Image: Contents of the S-Shape Machine package.
- Main Machine (1 unit)
- RF & Ultra Sound Handle (1 unit)
- RF & Suction Body Handle (1 unit)
- RF & Suction Face Handle (1 unit)
- EMS & EL Handle (1 unit)
- Large LED Laser Pads (6 units)
- Small LED Laser Pads (2 units)
- Korda tal-Enerġija (unità 1)
- Ċineg (sett wieħed)
Speċifikazzjonijiet
The following table outlines the technical specifications of the Mychway MS-45T2SB S-Shape Cavitation Machine:
Image: Detailed specifications of the S-Shape Machine and its handpieces.
| Attribut | Valur | Attribut | Valur |
|---|---|---|---|
| Brand | ARISTORM | Qawwa | 80 W |
| Mudell tal-prodott | MS-45T2SB | Dimensjonijiet (unità prinċipali) | 19.29 X 15.35 X 11.81" |
| Isem tal-prodott | S Shape Cavitation Machine | Daqs tal-pakkett | 22.8 X 20.4 X 15.7" |
| Funzjonijiet | Body Contouring, Skin Tightening & Lifting, Anti-aging Facials | Piż nett | 16.8 lbs |
| Input voltage | AC110V-240V | Piż gross | 24.7 lbs |
Handpiece Specifications:
| Handpiece | Teknoloġija | Frekwenza | Qawwa | Tul tal-mewġ |
|---|---|---|---|---|
| RF & Ultra Sound handle | RF | 1 MHz | 70W | N/A |
| Ultra Sound | 30 kHz | 50W | N/A | |
| EMS & EL handle | EMS | 62.5 kHz | 15W | N/A |
| EL | 3 Hz | 15W | N/A | |
| RF & Suction body handle | RF & Suction | 1 MHz | 80W | N/A |
| RF & Suction face handle | RF & Suction | 1 MHz | 40W | N/A |
| LED laser pads | Laser | N/A | 5mW | 635nm - 650nm |
Setup Istruzzjonijiet
Follow these steps for the initial setup of your S-Shape Cavitation Machine:
- Spakkjar: Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Żomm l-imballaġġ oriġinali għal ħażna jew trasport fil-futur.
- Pjazzament: Place the main machine on a stable, flat surface in a well-ventilated area. Ensure there is enough space around the machine for proper air circulation.
- Handle Connection: Identify each handpiece and connect it to the corresponding port on the main machine. Ensure each connection is secure. The ports are typically color-coded or labeled.
- LED Laser Pads: Connect the large and small LED laser pads to their designated ports. Use the provided straps to secure the pads to the treatment area during operation.
- Konnessjoni tal-Enerġija: Connect the power cord to the machine's power input and then plug it into a suitable electrical outlet (AC110V-240V).
- Qawwa Mixgħul: Press the power button on the main unit to turn on the machine. The display screen should illuminate.
- Vacuum Knob Adjustment: Locate the vacuum knob, usually on the side or back of the machine. This knob controls the suction intensity for the RF & Suction handpieces. Adjust it to the desired level (Min to Max) before starting treatment.
Immaġni: Quddiem view of the S-Shape machine, showing the display and connected handpieces.
Istruzzjonijiet Operattivi
The S-Shape Cavitation Machine offers various functions through its specialized handpieces. Always ensure the skin is clean and apply a suitable gel or cream before treatment, as recommended for each specific function.
Image: Synergy Effect diagram, showing handpieces for face and body treatments.
1. RF & Ultra Sound Body Handpiece
This handpiece combines 30KHz ultrasonic cavitation and 1MHz Radio Frequency (RF) for body contouring and skin tightening.
Image: RF & Ultra Sound Body Handpiece diagram and function.
- Funzjoni: Breaks down fat cells using 30KHz ultrasound and promotes collagen regeneration with 1MHz RF to improve skin texture and elasticity.
- Applikazzjoni: Suitable for areas with localized fat deposits and loose skin on the body.
- Użu: Apply conductive gel to the treatment area. Move the handpiece in circular motions or sweeping strokes. Adjust intensity as needed.
2. RF & Suction Body Handpiece
This handpiece combines vacuum suction with 1MHz RF for body sculpting and skin firming.
Image: RF & Suction Body Handpiece diagram and function.
- Funzjoni: Vacuum suction lifts and stimulates skin tissue, improving blood flow and lymphatic circulation. RF energy heats the dermis, contracting collagen and promoting new collagen growth, which helps reduce wrinkles, stretch marks, and body fat.
- Applikazzjoni: Ideal for body areas needing contouring, skin tightening, and reduction of cellulite or stretch marks.
- Użu: Apply conductive gel. Adjust vacuum intensity using the knob. Move the handpiece in a gliding motion, ensuring continuous contact with the skin.
3. EMS & EL Face Handpiece
This handpiece utilizes Electrical Muscle Stimulation (EMS) at 62.5KHz and Electroporation (EL) at 3Hz for facial rejuvenation.
Image: EMS & EL Face Handpiece diagram and function.
- Funzjoni: EMS stimulates facial muscles, while EL enhances the permeability of cell membranes, allowing better absorption of skincare products. This combination helps improve skin elasticity, smooth fine lines, and firm the skin.
- Applikazzjoni: Suitable for facial areas to improve skin tone, reduce wrinkles, and enhance product penetration.
- Użu: Apply a suitable serum or cream. Gently glide the handpiece over the face, avoiding the eye area. Adjust intensity carefully.
4. RF & Suction Face Handpiece
This handpiece combines vacuum suction with 1MHz RF specifically for facial lifting and anti-aging.
Image: RF & Suction Face Handpiece diagram and function.
- Funzjoni: Similar to the body version but optimized for delicate facial skin. Vacuum suction lifts and stimulates, while RF energy promotes collagen contraction and new collagen formation, leading to skin tightening and wrinkle reduction.
- Applikazzjoni: Used for facial lifting, anti-aging, and improving fine lines.
- Użu: Apply conductive gel. Adjust vacuum intensity to a low setting. Move the handpiece gently across facial contours.
5. LED Laser Pads
These pads use 650nm laser light for targeted fat reduction.
Image: 650nm Laser Body Pads diagram and function.
- Funzjoni: The 650nm laser penetrates the skin to target fat cells, causing them to release fatty acids and glycerol, which are then metabolized by the body. This process helps reduce localized fat and lower BMI.
- Applikazzjoni: Large pads are for areas like the waist, abdomen, back, and legs. Small pads are for smaller areas such as arms.
- Użu: Secure the pads to the desired treatment area using the provided straps. Ensure good contact with the skin.
Manutenzjoni
Proper maintenance ensures the longevity and optimal performance of your S-Shape Cavitation Machine:
- Tindif: After each use, wipe down all handpieces and the main unit with a soft, damp cloth. For disinfection, use a mild, non-abrasive disinfectant solution. Do not use harsh chemicals or immerse any part of the machine in water.
- Ħażna: Store the machine and its accessories in a clean, dry, and cool place, away from direct sunlight and extreme temperatures. Keep it covered to prevent dust accumulation.
- Kura tal-Cable: Avoid bending or twisting the cables excessively. Store them neatly to prevent damage.
- Spezzjoni: Periodically inspect all cables, connectors, and handpieces for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.
Issolvi l-problemi
This section addresses common issues you might encounter with your S-Shape Cavitation Machine:
- Q: The machine does not power on.
- A: Check if the power cord is securely connected to both the machine and the electrical outlet. Ensure the outlet is functional. Verify the power switch is in the 'ON' position.
- Q: No output from a handpiece.
- A: Ensure the handpiece is correctly connected to its designated port. Check the settings on the display screen to confirm the handpiece is selected and the intensity is set above zero. Make sure conductive gel is applied to the skin.
- Q: Weak or no suction from RF & Suction handpieces.
- A: Check the vacuum knob setting; increase it if necessary. Ensure the handpiece is making full contact with the skin and there are no air leaks. Verify the connection of the handpiece to the main unit.
- Q: Skin feels too hot during RF treatment.
- A: Reduce the RF intensity setting immediately. Ensure sufficient conductive gel is applied and that the handpiece is moved continuously over the skin to prevent heat buildup in one spot.
- Q: Redness on treated parts after cavitation.
- A: Slight redness is a minimal implication and usually subsides within several hours. Ensure you are drinking plenty of water to aid the body's processes. If redness persists or is severe, discontinue use and consult a professional.
Għajnuniet għall-Utent
Maximize your results and ensure a comfortable experience with these user tips:
- Hydration is Key: Drink plenty of water before and after cavitation treatments to help your body process and eliminate released fat.
- Konsistenza: For optimal results, follow the recommended treatment schedule (e.g., 2-3 times for the first two weeks, then once a week).
- Proper Gel Application: Always use a generous amount of conductive gel for RF and ultrasound treatments to ensure proper energy transmission and prevent skin irritation.
- Moviment Kontinwu: Keep handpieces moving constantly on the skin during treatment to distribute energy evenly and avoid hot spots.
- Isma' Ġismek: If you experience any discomfort or excessive heat, reduce the intensity or stop the treatment immediately.
- Dieta u Eżerċizzju: Combine treatments with a healthy diet and regular exercise to maintain long-lasting results.
Mistoqsijiet Frekwenti (FAQ)
- Q: Does cavitation tighten loose skin?
- A: Cavitation is primarily used to sculpt the body by breaking down fat, but it also works on saggy skin and body parts caused by various reasons, especially when combined with RF technology for skin tightening.
- Q: How often can the machine be used?
- A: In the first month, 2-3 times for the first two weeks and once for the following two weeks. Then once a week is recommended from the second month onwards.
- Q: What are the side effects of ultrasonic cavitation?
- A: The implications are minimal. In some cases, you may notice redness on treated parts, which will be gone in several hours. It is important to drink plenty of water if you feel thirsty.
- Q: Which areas of the body can you perform cavitation on? And which not?
- A: It can be used on any body area, especially the upper arms, waist, abdomen, and thighs. It cannot be used on the head, neck, chest, or back.
- Q: When will I see the results? What results can I expect?
- A: It is proven that 1 to 2.5 shortened inches can be expected in four weeks; 8 to 10 times per area for better results. To maintain long-lasting results, a healthy diet and regular exercise are recommended.
- Q: What is the warranty of our beauty equipment?
- A: One year warranty for the main machine, three months for the consumables (handle, screen, etc.).
- Q: What will you do when quality problem happened?
- A: We can provide free technical support, and free replacement parts during the warranty time.
- Q: What should I do if I don't know how to use the machine?
- A: We have operation video and user manual for your reference, and we can also provide 24/7 after sales support.
Garanzija u Appoġġ
The Mychway MS-45T2SB S-Shape Cavitation Machine comes with a comprehensive warranty and dedicated support:
- Perjodu ta' Garanzija: The main machine is covered by a one-year warranty. Consumable parts such as handles and the screen have a three-month warranty.
- Appoġġ Tekniku: Free technical support is available. In case of quality problems, free replacement parts will be provided during the warranty period.
- Servizz tal-Klijent: 24/7 after-sales support is available to assist with any operational questions or issues. An operation video and user manual are provided for reference.
For any inquiries or support, please contact your seller or the manufacturer directly.
