Introduzzjoni
Thank you for choosing the BUVAYE 1819/1920 Multifunctional Air Pump and Jump Starter. This device is designed to provide reliable tire inflation and emergency power for various vehicles and inflatable items. Please read this manual carefully before use to ensure safe and optimal performance.
Image: The BUVAYE 1819/1920 device connected to a car tire, showing its digital display and included accessories.
Twissijiet Importanti dwar is-Sigurtà
- Do not inflate continuously for more than 10 minutes. Allow the device to cool down for 5-8 minutes after 5-8 minutes of use to prevent overheating and product damage.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Tesponix l-apparat għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.
- Ensure the correct pressure setting for the item being inflated to avoid over-inflation and potential hazards.
- Uża biss l-aċċessorji u l-kejbils tal-iċċarġjar provduti.
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:
- 1 x BUVAYE Air Pump
- 1 x Tubu li jintefaħ
- 1 x Kejbil tal-Iċċarġjar (Tip Ċ)
- 4 x Inflatable Heads (nozzles)
- 4 x Tire Air Caps
Image: All components included in the BUVAYE Air Pump package.
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tad-Ditta | BUVAYE |
| Isem tal-Mudell | YX1819 |
| Tip ta' Oġġett | Pompi |
| Materjal | ABS |
| Voltage | 12V |
| Piż tal-oġġett | 0.83kg |
| Għoli tal-Oġġett | 5.5ċm |
| Wisa' tal-Oġġett | 8.5ċm |
| Tul tal-Oġġett | 18.5ċm |
| Tire Pressure Accuracy | 1.5PSI |
| Qawwa Rated | 120W |
| Tracheal Length | 100mm |
| Pressjoni tat-Tajers issettjata minn qabel | Appoġġ |
| Gauge tal-Pressjoni tat-Tajers | Appoġġ |
| Iċċarġjar tal-Input Voltage | 12V |
| Pressjoni tal-Arja Massima | 150PSI |
| Cylinder Block Specification | 19 ċilindri |
| Kapaċità tal-batterija | 6000mAh (3*2000mAh) |
| Fluss tal-arja | 25 L/min |
| Veloċità tal-Mutur | 16000 R/Min |
Setup u Iċċarġjar
Għażliet tal-Provvista tal-Enerġija:
The BUVAYE air pump offers two convenient power supply methods:
- Cordless Operation (Internal Battery): The device features a built-in 6000mAh rechargeable battery for portable use. Ensure the battery is sufficiently charged before use. The 5V/2A Type-C input port is used for charging the device.
- 12V DC Corded Operation: If the internal battery is low or for extended use, connect the device to your vehicle's 12V cigarette lighter socket using the provided cable. The 10.5-foot cable allows easy access to all tires.
Image: Illustration of the dual power supply options for the air pump.
Image: Visual representation of the two power supply methods.
Iċċarġjar tal-Apparat:
Connect the provided Type-C charging cable to the device's input port and a suitable 5V/2A USB power adapter (not included). The battery indicator on the display will show charging status.
Istruzzjonijiet Operattivi
Kontrolli Fuqview:
Immaġni: Dettaljata view tal-pannell tal-kontroll u d-displej diġitali.
- Buttuna tal-Enerġija (U): Long press to turn on/off the air pump. Short press to start/stop inflation.
- Flashlight Button (Lightbulb icon): Press to cycle through LED light modes (Flashlight, Warning, SOS).
- Pressure Adjustment (+/-): Use to increase or decrease the target pressure value. Long press for quick adjustment.
- Mode Switching Button (Circular arrow icon): Press to select inflation modes (Car, Bicycle, Motorcycle, Ball) or to adjust pressure units (PSI, Bar, Kpa, Kg/cm²).
Proċess ta' Inflazzjoni:
Image: Step-by-step guide for using the air pump.
- Ixgħel: Long press the Power Button (U) to turn on the air pump. The digital display will illuminate.
- Qabbad il-Pajp tal-Arja: Connect the inflatable tube to the air pump and then securely attach the appropriate nozzle to the valve of the item you wish to inflate.
- Select Mode/Unit: Short press the Mode Switching Button (circular arrow icon) to select the desired inflation mode (Car, Bicycle, Motorcycle, Ball). You can also press it to cycle through pressure units (PSI, Bar, Kpa, Kg/cm²).
- Issettja l-Pressjoni Mira: Use the '+' or '-' buttons to set the accurate target pressure value. The display shows real-time pressure and the preset value.
- Ibda l-Inflazzjoni: Short press the Power Button (U) to begin inflation. The device will start pumping air, and the display will show the increasing real-time pressure.
- Tifi Awtomatiku: The air pump will automatically stop once the preset target pressure is reached. Disconnect the air hose from the item and the device.
The device is capable of fast inflation, reaching 150 PSI maximum pressure with an airflow of 25 L/min and a motor speed of 16000 R/Min. It can inflate a car tire from 0-36 PSI in approximately 4 minutes.
Image: Performance metrics highlighting fast inflation.
Emergency LED Light Function:
The device includes multi-mode LED lights for emergency situations:
- Modalità tal-flashlight: Jipprovdi dawl kostanti.
- Modalità tad-Dawl ta' Twissija: Flashes alternately.
- Modalità SOS: Emits an SOS signal.
Press the Flashlight Button (lightbulb icon) to cycle through these modes. This feature is useful for roadside emergencies or when operating in low-light conditions.
Image: Visual guide to the emergency LED light modes.
Funzjoni tal-Bank tal-Enerġija:
The 5V/2A USB output port allows the air pump to function as an emergency power bank for charging mobile phones or other small electronic devices.
Image: The air pump being used to charge a smartphone.
Manutenzjoni
- Perjodi ta' tkessiħ: To prolong the life of the air pump and prevent overheating, do not operate continuously for more than 10 minutes. After 5-8 minutes of use, pause for at least 5-8 minutes to allow the device to cool down.
- Tindif: Imsaħ il-barra tal-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Ħażna: Aħżen il-pompa tal-arja u l-aċċessorji tagħha f'post frisk u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Kura tal-batterija: For optimal battery life, charge the device fully before long-term storage and recharge it every 3-6 months if not in use.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat ma jixgħelx. | Batterija baxxa jew l-ebda konnessjoni tal-enerġija. | Charge the internal battery or connect to a 12V DC cigarette lighter power source. Ensure the power button is long-pressed. |
| Air pump not inflating. | Hose not properly connected, wrong mode selected, or target pressure not set. | Ensure the air hose is securely attached to both the pump and the item's valve. Select the correct inflation mode and set the desired pressure. Press the start button. |
| Device overheats and stops. | Tħaddim kontinwu għal żmien twil wisq. | Allow the device to cool down for 5-8 minutes after 5-8 minutes of use. Avoid continuous operation for more than 10 minutes. |
| Qari tal-pressjoni mhux preċiż. | Konnessjoni maħlula jew problema bis-sensor. | Ensure the hose connection is tight. If the issue persists, contact customer support. |
Għajnuniet għall-Utent
- Always check the recommended tire pressure for your vehicle or item before inflating.
- For car tires, it's often best to check and adjust pressure when tires are cold for the most accurate reading.
- Keep the various nozzles organized in the provided storage bag for easy access.
- The power bank feature is great for emergencies, but it's not intended as a primary charging solution for daily use.
Vidjo ta' Dimostrazzjoni tal-Prodott
Video: A short demonstration of the BUVAYE air pump's features, including tire inflation, power bank function, and LED lights.
Garanzija u Appoġġ
For any product inquiries, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the product. Keep your purchase receipt as proof of purchase.
