Xiaomi Handheld Mini USB Rechargeable Milk Frother

1. Introduzzjoni

Thank you for choosing the Xiaomi Handheld Mini USB Rechargeable Milk Frother. This versatile and portable device is designed to help you create rich, creamy foam for your coffee, cappuccino, latte, hot chocolate, and other beverages. With its powerful motor and three-speed settings, it can also be used for whisking eggs, mixing sauces, and preparing baby food. Enjoy a professional barista experience in the comfort of your home or on the go.

2. Informazzjoni dwar is-Sigurtà

• Keep the frother away from water and other liquids, except for the whisk head during cleaning. Do not immerse the main body in water.
• Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom.
• Ensure the charging cable is not damaged and is connected to a suitable power source.
• Do not operate the frother if it has been damaged in any way.
• Keep fingers and loose clothing away from the whisk head during operation.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• 1 x Xiaomi Handheld Milk Frother Unit
• 1 x Dual-Tier Whisk Head (Stainless Steel)
• 1 x Cable tal-Iċċarġjar tal-USB Type-C

4. Speċifikazzjonijiet

Note: There may be slight differences in measurements due to manual measurement.

Figura 4.1: Dimensjonijiet u Speċifikazzjonijiet tal-Prodott

5. Setup

5.1 Assembling the Whisk Head

The frother is designed for easy assembly and disassembly. To attach the whisk head:

1. Align the whisk rod with the opening on the frother unit.
2. Gently press the whisk into the unit until it clicks securely into place.

To disassemble, simply pull the whisk head out from the unit.

Figure 5.1: Easy Assembly and Disassembly

5.2 Charging the Frother

The frother features a built-in rechargeable battery and a USB Type-C charging port for convenience.

1. Locate the USB Type-C port at the bottom of the frother unit.
2. Connect the provided USB Type-C cable to the frother and plug the other end into a USB power source (e.g., wall adapter, power bank, computer USB port).
3. The indicator lights on the frother will show the charging status. A full charge can last for approximately one month of daily use.

Figura 5.2: Iċċarġjar USB tat-Tip Ċ

6. Istruzzjonijiet Operattivi

The Xiaomi Milk Frother offers three-speed settings for various mixing needs. The power button also controls the speed settings.

6.1 Mixgħul/Mitfi u Għażla tal-Veloċità

1. Qawwa Mixgħul: Press the power button once to turn on the frother at the lowest speed setting. One indicator light will illuminate.
2. Bidla Veloċità: Press the power button again to cycle through the speed settings: Low (1 light), Mid (2 lights), High (3 lights).
3. Itfi: After reaching the highest speed, press the button one more time to turn off the frother. Alternatively, press and hold the power button for a few seconds to turn it off from any speed setting.

Figure 6.1: Three Speed Settings

6.2 Frothing Milk and Other Uses

• For Milk Froth: For best results, it is recommended to heat milk to approximately 50°C (122°F). Insert the whisk head into the milk, ensuring it is submerged but not touching the bottom. Select a high-speed setting and froth for 20-30 seconds until desired foam consistency is achieved. The dual-tier foamer is designed to create rich and delicate foam quickly.
• For Egg Mixtures: Use the low-speed setting to gently stir egg mixtures for custards or omelets.
• For Sauces and Baby Food: The mid-speed setting is ideal for mixing jams, honey sauces, or preparing smooth baby food.

Figure 6.2: Creating Creamy Milk Foam

7. Tindif u Manutenzjoni

The Xiaomi Milk Frother is designed for easy cleaning thanks to its food-grade stainless steel whisk head.

1. After each use, rinse the whisk head under running water.
2. For a more thorough clean, place the whisk head into a glass of water and turn on the frother. The vortex flow will help clean the whisk more effectively.
3. Turn off the frother and then turn it on again for 2-3 seconds to dry the whisk head by spinning off excess water.
4. Wipe the main body of the frother with a damp cloth if needed. Do not immerse the main body in water.
5. Aħżen ir-ragħwa f'post niexef.

Figure 7.1: Easy Cleaning and Durable Materials

8 Issolvi l-problemi

• Ir-ragħwa mhux qed tixgħel: Ensure the battery is charged. Connect the frother to a USB power source using the provided cable.
• Weak frothing/mixing: Check if the whisk head is securely attached. Ensure the battery is sufficiently charged. For milk, ensure it is adequately warmed (around 50°C).
• Ħoss mhux tas-soltu waqt it-tħaddim: Ensure the whisk head is not bent or damaged. Check for any obstructions. If the issue persists, discontinue use.

9. Għajnuniet għall-Utenti

• While the product is often associated with Xiaomi, the specific brand indicated on the product specifications is MIJIA. Both are related, with MIJIA being a sub-brand under the Xiaomi ecosystem.
• For optimal milk frothing, use fresh, cold milk and heat it to the recommended temperature before frothing.
• Experiment with different milk types (dairy, almond, oat) to find your preferred foam consistency.
• To avoid splashes, start frothing with the whisk head fully submerged and gradually raise it as the foam forms.

10. Garanzija u Appoġġ

For any questions, concerns, or technical support regarding your Xiaomi Handheld Mini USB Rechargeable Milk Frother, please refer to the seller's contact information or the platform where the product was purchased. Keep your purchase receipt as proof of purchase.