Manwal tal-Istruzzjonijiet tal-Magna tal-Istampa bis-Sħana tat-Tumbler Awtomatiku EENOUR

1. Prodott Aktarview

The EENOUR Auto Tumbler Heat Press Machine is designed for seamless and efficient sublimation printing on various drinkware. It features automatic pressing, rotation, and precise digital control for temperature, time, and pressure, ensuring high-quality full prints on tumblers, glasses, and mugs.

EENOUR Auto Tumbler Heat Press Machine with accessories — Figure 1: EENOUR Auto Tumbler Heat Press Machine and included accessories (heat-resistant gloves, heat tape, sample mugs/tumblers).

2. Istruzzjonijiet tas-Sigurtà

Always wear heat-resistant gloves when handling hot items or machine parts.
Kun żgur li l-magna titqiegħed fuq wiċċ stabbli u reżistenti għas-sħana.
Keep hands clear of the heating element during operation.
Do not operate the machine for more than 1.5 hours continuously. Allow a 20-minute cool-down period after prolonged use.
Skonnettja l-magna mill-plagg tal-elettriku meta ma tkunx qed tużaha jew qabel it-tindif/manutenzjoni.
Use the emergency stop button for immediate shutdown if needed.

3. Setup

Spakkjar: Carefully remove the heat press machine and all accessories from the packaging. Inspect for any damage.
Pjazzament: Place the machine on a flat, stable, and heat-resistant workbench. Ensure adequate ventilation around the machine.
Konnessjoni tal-Enerġija: Qabbad il-korda tal-enerġija mal-magna u mbagħad ma' sokit elettriku ertjat.
Qawwa Inizjali Mixgħula: Flip the main power switch (usually located on the side) to the 'ON' position. The digital display should illuminate.

4. Istruzzjonijiet Operattivi

4.1 Control Panel Overview

The control panel features a digital display for temperature, time, and counter, along with buttons for mode selection, setting adjustments, and start/stop functions.

Control panel with pressure value setting — Figure 2: Digital display and control buttons, showing pressure value setting.

4.2 Issettjar tal-Parametri

The machine offers 4 pre-set and memory modes. Modes 1-3 include auto-rotation, while Mode 4 is for items that do not require rotation (e.g., standard mugs).

Firxa tat-Temperatura: 0-410℉
Medda tal-arloġġ: 0-399 sekondi
L-issettjar tal-pressjoni: Digital adjustment (larger 'dn' value indicates greater pressure).

Four printing modes with pressure and diameter ranges — Figura 3: Aktarview of the 4 printing modes, including recommended pressure values and compatible diameter ranges.

4.3 Operation for Straight Tumblers & Glasses (Modes 1-3)

Ipprepara l-Oġġett: Wrap your sublimation design around the tumbler or glass and secure it with heat-resistant tape.
Agħżel il-Modalità: Choose a mode from 1-3 on the control panel.
Issettja l-Parametri: Adjust the temperature, time, and pressure value according to your material and design requirements.
Saħħan minn qabel: Allow the machine to reach the set temperature. It is recommended to place a blank tumbler in the machine during pre-heating to prevent damage to the attachment.
Daħħal l-Oġġett: Once heated, carefully insert the prepared tumbler or glass into the heating element.
Start Press: Press the 'START' button. The machine will automatically press, release, and rotate the item (100°-150° after the first press) to ensure a full, even print.
Tlestija: An alarm will sound upon completion. Carefully remove the hot item using heat-resistant gloves.

Steps for pressing straight tumblers and glasses — Figure 4: Step-by-step guide for pressing straight tumblers and glasses.

4.4 Operation for Mugs (Mode 4)

Ipprepara l-Oġġett: Wrap your sublimation design around the mug and secure it with heat-resistant tape.
Agħżel il-Modalità: Choose Mode 4 on the control panel.
Issettja l-Parametri: Adjust the temperature, time, and pressure value.
Saħħan minn qabel: Allow the machine to reach the set temperature. Place a blank mug in the machine during pre-heating.
Daħħal l-Oġġett: Carefully insert the prepared mug into the heating element.
Start Press: Press the 'START' button. The machine will automatically press and release. Note that Mode 4 does not include auto-rotation.
Tlestija: An alarm will sound upon completion. Carefully remove the hot item using heat-resistant gloves.

Steps for pressing mugs — Figure 5: Step-by-step guide for pressing mugs.

4.5 Automatic Press and Release

The machine is designed for automatic pressing and release based on the set pressure value. Once the process is complete, the heating element will automatically open.

Automatic press and release function — Figure 6: Demonstration of the automatic press and release function.

4.6 Auto Rotation for Full Sublimation

For tumblers and glasses, the machine automatically rotates the item by 100°-150° after the initial press to ensure full, seamless sublimation without manual intervention.

Auto rotation mechanism — Figure 7: Diagram illustrating the 100° auto-rotation feature for full sublimation.

4.7 Waqfien ta' Emerġenza

For safety, the machine is equipped with a quick emergency stop button. Press this button to immediately halt any operation.

Buttuna ta' waqfien ta' emerġenza — Figure 8: Location of the quick emergency stop button for safe operation.

5. Manutenzjoni

Tindif: Ensure the machine is unplugged and completely cool before cleaning. Wipe down exterior surfaces with a soft, damp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx il-magna fl-ilma.
Heating Attachment: The heating attachment is a consumable part and typically needs replacement every 3-6 months, especially if you notice bubbling or improper heating. Contact customer support for replacements.
Ħażna: Aħżen il-magna f'ambjent niexef u ħieles mit-trab meta ma tkunx qed tintuża.

6 Issolvi l-problemi

Problem: Tumbler attachment is damaged or bubbled.: Soluzzjoni: This is an occasional issue that has been addressed with upgraded attachment quality. If this occurs, contact EENOUR customer support for a free replacement if your machine is under the protection period.
Problem: Auto-rotation function is not working.: Soluzzjoni: Ensure you have selected Modes 1-3. Mode 4 does not have the auto-rotation function. Select the correct press mode for your item.
Problem: Machine does not close completely.: Soluzzjoni: This is normal. The machine is designed to auto-rotate the tumbler 100°-150° after the first press and then heat press again to achieve a full print. It does not need to close completely throughout the process.
Problem: Machine shows a temperature difference.: Soluzzjoni: A small temperature difference is normal and will not affect the sublimation result. If the difference is over 30℉, please contact EENOUR customer support for assistance or a replacement.

7. Speċifikazzjonijiet

Karatteristika	Speċifikazzjoni
Mudell	Auto Tumbler Heat Press Machine (CH2304)
Pressjoni	Accurate Digital Setting
Firxa tat-Temperatura	0-410℉
Medda ta' Timer	0-399 sekondi
Medda tad-dijametru	2.75"-3.38"
Oġġetti Kompatibbli	11-32oz Stainless Steel Tumblers, 16-25oz Glasses, 11-16oz Ceramic and Enamel Mugs
Dimensjonijiet (H x W x D)	14.2 pulzieri x 12.4 pulzieri x 7.7 pulzieri
Element tat-tisħin	Silicone Thermal Pad, High Density Heat Wire, Heater Protection, Thickened & Durable Fiber
Karatteristiċi	Auto Press, Auto Rotate (Modes 1-3), Digital Pressure Setting, 4 Memory Modes, Use Times Records

Dimensions of the EENOUR Auto Tumbler Heat Press Machine — Figure 9: Machine dimensions: 14.2 inches (H), 12.4 inches (W), 7.7 inches (D).

Internal structure of the heating element — Figura 10: Sezzjoni trasversali view of the heating element, highlighting the Silicone Thermal Pad, High Density Heat Wire, Heater Protection, and Thickened & Durable Fiber.

8. Għajnuniet għall-Utenti

To prevent damage to the heating attachment and avoid bubbling, always place a blank tumbler or mug in the machine when it is heating up.
For optimal machine longevity, avoid continuous operation for more than 1.5 hours. If prolonged use is necessary, turn off the machine for 20 minutes to allow it to cool down before resuming.
Experiment with the pressure settings to find the ideal 'dn' value for different materials and desired print quality.

9. Garanzija u Appoġġ

EENOUR provides customer support for product inquiries, troubleshooting, and warranty claims. If your machine or its heating attachment experiences issues within the protection period, you may be eligible for a free replacement.

For assistance, please contact EENOUR customer service through the seller's platform or official websit.

	Manwal tal-Utent tal-Pressjoni tal-Mug tat-Tumbler b'Żewġ Stazzjonijiet EENOUR CH2244 Manwal tal-utent għall-EENOUR CH2244 Two Station Tumbler Mug Press, li jipprovdi struzzjonijiet dettaljati dwar is-setup, it-tħaddim, il-prekawzjonijiet ta' sigurtà, is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija għall-istampar bis-sublimazzjoni fuq tumblers.
	Manwal tal-Utent tal-Magna tal-Istampa tal-Kpiepel Portabbli EENOUR CH2240 Manwal tal-utent għall-Magna tal-Istampa tal-Kpiepel Portabbli EENOUR CH2240, li jipprovdi struzzjonijiet, linji gwida tas-sigurtà, speċifikazzjonijiet, u passi operattivi għall-ippressar bis-sħana tal-kpiepel.
	Manwal tal-Utent tan-Nuċċali Protettivi tal-Iwweldjar EENOUR EN200 Manwal komprensiv għall-utent għan-nuċċalijiet protettivi tal-iwweldjar EENOUR EN200, li jagħti dettalji dwar il-prekawzjonijiet ta' sigurtà, l-identifikazzjoni tal-partijiet, l-istruzzjonijiet għall-użu, il-manutenzjoni, il-gwida għas-soluzzjoni tal-problemi, l-ispeċifikazzjonijiet tal-prodott, u l-informazzjoni dwar il-garanzija.
	Manwal tal-Utent tal-Elmu tal-Iwweldjar EENOUR EN600G li Jdallam Awtomatiku Manwal komprensiv għall-utent għall-Elmu tal-Iwweldjar EENOUR EN600G Auto Darkening, li jkopri l-prekawzjonijiet ta' sigurtà, id-deskrizzjoni tal-partijiet, l-użu, il-manutenzjoni, is-soluzzjoni tal-problemi, u l-ispeċifikazzjonijiet.
	EENOUR インバーター発電機 GS950iD-B 取扱説明書 EENOUR インバーター発電機 GS950iD-Bの取扱説明書。安全な使用方法、点検、メンテナンス、トラブルシューティングに関する情報を提供します。
	Manwal tal-Utent tal-Batterija ta' Espansjoni Intelliġenti EENOUR X2000 Manwal tal-utent għall-Batterija ta' Espansjoni Intelliġenti EENOUR X2000, li jiddeskrivi l-ispeċifikazzjonijiet, il-karatteristiċi, it-tħaddim, il-metodi ta' ċċarġjar, il-kapaċitajiet ta' espansjoni, is-soluzzjoni tal-problemi, u l-manutenzjoni tagħha.

EENOUR Auto Tumbler Heat Press Machine