1. Prodott Aktarview
The Oneodio SuperEQ A200 headphones are designed to provide a superior audio experience with advanced features such as Hybrid Active Noise Cancellation, Bluetooth 5.4 connectivity, and a long-lasting battery. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Karatteristiċi ewlenin:
- Kanċellazzjoni Attiva tal-Istorbju Ibrida (sa -38dB)
- Advanced Bluetooth 5.4 for stable connections
- Up to 100 hours of playback (ANC off)
- Type-C Fast Charging (5 min charge for 7 hrs playtime)
- Detachable and Adjustable Microphone with mute button
- 6-Mic AI ENC for clear calls
- Hi-Res Audio with custom 40mm dynamic drivers
- Modalità Trasparenza
- Intelligent App Control via SuperEQ app
- Comfortable over-ear design with memory foam padding
- Multi-Point Connection for simultaneous device pairing
- Unique Rotary Button for intuitive control
2. Setup
2.1 X'hemm fil-Kaxxa
- 1 x A200 Active Noise Canceling Headphone
- 1 x 3.5mm Cable Awdjo
- 1 x Cable tal-Iċċarġjar tat-Tip-Ċ
- 1 x Detachable Microphone with Mic Mute Button
- 1 x Manwal għall-Utent
2.2 Iċċarġjar tal-Headphones
Before first use, fully charge your headphones. To charge:
- Qabbad il-kejbil tal-iċċarġjar tat-Tip Ċ provdut mal-port tal-iċċarġjar fuq il-headphones.
- Qabbad it-tarf l-ieħor tal-kejbil ma' sors ta' enerġija USB (eż., adapter tal-ħajt, port USB tal-kompjuter).
A full charge takes less than 3 hours. A quick 5-minute charge provides approximately 7 hours of playtime.
2.3 Tixgħel/Jitfi
- Qawwa Mixgħul: Agħfas u żomm il-Butuna Multi-Funzjoni (MFB) għal 2 sekondi.
- Itfi: Agħfas u żomm l-MFB għal 5 sekondi.
2.4 Tqabbil tal-Bluetooth
Biex tqabbad il-headphones tiegħek mingħajr fili:
- Kun żgur li l-headphones huma mitfija.
- Press and hold the MFB for 2 seconds to power on. The headphones will automatically enter pairing mode (indicated by an LED light).
- Fuq l-apparat tiegħek (smartphone, tablet, kompjuter), attiva l-Bluetooth.
- Fittex għal available devices and select "SuperEQ A200" from the list.
- Once connected, the LED indicator will change, and you will hear an audio prompt.
Konnessjoni b'ħafna punti: The A200 supports connecting to two Bluetooth devices simultaneously. To use this feature:
- Pair with the first device as described above.
- Temporarily disconnect Bluetooth on the first device.
- Pair mat-tieni apparat.
- Reconnect Bluetooth on the first device. The headphones should now be connected to both devices, allowing seamless switching between audio sources.
Tqabbil ċar: To clear all previous Bluetooth pairings, press and hold the MFB for 8 seconds while the headphones are powered off.
2.5 Konnessjoni bil-Fili
You can use the provided 3.5mm audio cable to connect the headphones to devices that do not support Bluetooth or when the battery is depleted. Simply plug one end into the headphone's 3.5mm jack and the other into your audio source.
3. Istruzzjonijiet Operattivi
3.1 Controls (Unique Rotary Button)
The A200 headphones feature a unique rotary button and a dedicated ANC button for easy control:
Buttuna Multi-Funzjoni (MFB):
- Ikklikkja waħda: Play/Pause music, Answer/Hang Up calls.
- Agħfas u żomm għal 2 sekondi: Tiċħad telefonata li tkun deħlin.
- Ikklikkja darbtejn: Track li jmiss.
- Ikklikkja trippla: Track preċedenti.
- Dawwar lejn ix-xellug: Volum Up.
- Dawwar lejn il-lemin: Volum 'l isfel.
Active Noise Cancellation (ANC) Button:
- Ikklikkja waħda: Switch between ANC On, Transparency Mode, and ANC Off.
- Ikklikkja trippla: Activate/Deactivate Voice Assistant (e.g., Apple Siri Support).
3.2 Użu tal-Mikrofonu
The A200 headphones come with a detachable and adjustable microphone for enhanced call quality, especially useful for online meetings, remote work, and gaming.
- Attach the detachable microphone to the designated port on the headphone.
- Use the one-click mute button located on the detachable microphone for instant control during calls.
Note: The microphone functions only when the headphones are connected in wireless (Bluetooth) mode.
3.3 Kanċellazzjoni Attiva tal-Istorbju (ANC) u Modalità ta' Trasparenza
The A200 headphones offer versatile noise control options:
- ANC ibridu: Instantly blocks out up to 95% of low and mid-range frequency noises, such as traffic and airplane engines, allowing you to maintain focus.
- Modalità ta' Trasparenza: Allows you to hear your surroundings and interact with the world without removing your headphones.
Switch between these modes using a single click of the dedicated ANC button.
3.4 Intelligent App Control
Enhance your listening experience by downloading the SuperEQ app. The app allows you to customize audio settings, adjust equalizer presets, and access additional features for your A200 headphones.
4. Manutenzjoni
Kura xierqa se testendi l-ħajja tal-headphones tiegħek.
4.1 Tindif
- Use a soft, dry cloth to clean the exterior of the headphones.
- Tużax prodotti tat-tindif likwidi jew sprejs direttament fuq il-headphones.
- Gently wipe the earcups and headband to remove any sweat or debris.
4.2 Ħażna
- Aħżen il-headphones f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Evita li tpoġġi oġġetti tqal fuq il-headphones.
4.3 Kura tal-Batterija
- Biex ittawwal il-ħajja tal-batterija, evita li l-headphones jiċċarġjaw kompletament ta’ spiss.
- Iċċarġja l-headphones regolarment, anke jekk ma tkunx qed tużahom għal perjodi twal.
5 Issolvi l-problemi
If you encounter any issues with your A200 headphones, refer to the following common problems and solutions:
5.1 Ebda Qawwa
- Kun żgur li l-headphones huma ċċarġjati. Qabbadhom ma' sors ta' enerġija billi tuża l-kejbil tat-Tip Ċ.
- Press and hold the MFB for 2 seconds to power on.
5.2 Ebda Ħoss jew Volum Baxx
- Check the volume level on both the headphones (rotate MFB) and your connected device.
- Kun żgur li l-headphones huma konnessi sew permezz tal-Bluetooth jew il-kejbil tal-awdjo ta' 3.5mm.
- If using Bluetooth, try disconnecting and re-pairing.
5.3 Kwistjonijiet ta' Tqabbil tal-Bluetooth
- Ensure the headphones are in pairing mode (LED indicator blinking).
- Itfi u ixgħel il-Bluetooth fuq l-apparat tiegħek.
- Try clearing previous pairings on the headphones (press and hold MFB for 8 seconds while powered off) and then re-pair.
- Kun żgur li t-tagħmir tiegħek jinsab fil-medda ta' 10 metri tal-Bluetooth.
5.4 Kwalità Fqira tas-Sejħiet
- Kun żgur li l-mikrofonu li jista' jinqala' huwa konness sew.
- Check if the microphone mute button is engaged.
- Confirm that the headphones are in wireless (Bluetooth) mode, as the microphone only functions in this mode.
- Ensure there are no obstructions between the microphone and your mouth.
5.5 Active Noise Cancellation Not Working
- Press the ANC button to cycle through the ANC modes (ANC On, Transparency Mode, ANC Off) and ensure ANC is activated.
5.6 Kwistjonijiet ta' Konnessjoni tal-App
- Ensure Bluetooth is enabled on your device and the headphones are connected.
- Make sure you have the latest version of the SuperEQ app installed.
- Ibda mill-ġdid l-app u erġa' pprova ikkonnettja.
6. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell tal-Prodott | A200 |
| Dijametru tas-sewwieq | 40mm |
| Sensittività | 118 ±3dB at 1kHz |
| Impedenza | 32Ω 10% |
| Rispons ta' Frekwenza | 20Hz ~ 40kHz |
| Sensittività tal-mikrofonu | -38 ±1dBV/Pa |
| Verżjoni Bluetooth | V5.4 |
| Kapaċità tal-batterija | 1000mAh Li-polimeru batterija |
| Distanza Bluetooth | 10-il metru |
| Ħin ta' Daqq (ANC OFF) | Madwar 100 Sigħat |
| Playback Time (ANC ON) | Madwar 60 Sigħat |
| Ħin tal-Iċċarġjar | <3 Sigħat |
| Interface tal-iċċarġjar | USB Tip-Ċ |
| Input Voltage | DC 5V-1A |
| Tnaqqis tal-Istorbju fil-fond | Sa -38dB |
| Dimensjonijiet tal-Prodott (LxWxH) | 183.12x91.2x212.82 mm |
| Piż Totali | 285 gramma (minbarra MIC) |
| Materjal | Plastik |
| Tip ta 'earcups | Issiġillat |
| Materjal tal-Pads tal-Headphones | Fowm tal-memorja |
| Tip ta ’Kalamita | Neodimju |
| Codecs | AAC, SBC |
| Karatteristiċi | With microphone, Apple Siri Support, Detachable Cable, Active Noise Cancelling, Dual Connection, Voice assistant built-in, Sound Isolating, Support APP, Volume Control, Control Button |
| Ċertifikazzjoni | CE, FCC, RoHS, WEEE |
7. Garanzija u Appoġġ
7.1 Informazzjoni dwar Garanzija
Oneodio offers a 6 to 24-month warranty for the SuperEQ A200 headphones, counting from the time the order is placed:
- Fi żmien 6-il xahar: Free replacement for any issues with the headset.
- More than 6 months but within 24 months: Replacement is available; however, the customer is responsible for the shipping cost.
7.2 Appoġġ għall-Klijent
For any further questions, concerns, or support needs, please contact Oneodio customer service. Refer to the seller's contact information or the official Oneodio websit għad-dettalji.
8. Għajnuniet għall-Utenti
- Kwalità Ottimali tal-Awdjo: For the best audio experience, ensure your connected device supports the AAC codec, which these headphones utilize.
- No Dongle Needed: These headphones connect directly via Bluetooth 5.4; a separate dongle is not required for wireless operation.
- Personalizzazzjoni tal-App: Download the SuperEQ app to personalize your sound profile and access advanced settings.
- Aġġornamenti tal-Firmware: Regularly check the SuperEQ app for any available firmware updates to ensure optimal performance and new features.
- Kumdità għal Sessjonijiet Twila: The ultra-soft protein leather earcups with memory foam padding are designed for extended listening comfort. Adjust the headband for a snug fit.
9. Mistoqsijiet Frekwenti (FAQ)
Q: What audio codecs do these headphones support?
A: The Oneodio SuperEQ A200 headphones support AAC and SBC audio codecs.
Q: Do these headphones require a dongle for connection?
A: No, these headphones connect wirelessly via Bluetooth 5.4 and do not require a separate dongle.
Q: Can I use the microphone when connected via the 3.5mm audio cable?
A: No, the microphone (both built-in and detachable) only functions when the headphones are connected in wireless (Bluetooth) mode.