Introduzzjoni
The Ambitful AF970 Speedlight is a high-performance, high-compatibility, and high-power flash unit designed for various camera systems. It features a built-in 2.4G wireless receiver, multiple flash modes, and flexible shooting angles to enhance your photography lighting. This manual provides detailed instructions for setting up, operating, and maintaining your AF970 Speedlight.
Kontenut tal-Pakkett
Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:
Image: Package contents of the AF970 Speedlight.
- Flash Unit (x1)
- Stand Żgħir (x1)
- Diffużur (x1)
- Borża tal-Ħażna (x1)
- Warranty Card & Certificate (x1)
Setup
1. Installazzjoni tal-batterija
The AF970 Speedlight requires 4x AA batteries (Alkaline or Ni-MH are usable). To install:
- Iftaħ l-għatu tal-kompartiment tal-batterija li jinsab fuq il-ġenb tal-unità tal-flash.
- Daħħal 4 batteriji AA, filwaqt li tiżgura polarità korretta (+/-).
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Image: Battery compartment and hot shoe detail.
2. Immuntar mal-Kamera
The AF970 Speedlight is equipped with a universal hot shoe for mounting onto compatible cameras.
- Slide the speedlight's hot shoe onto your camera's hot shoe mount.
- Secure the flash unit by rotating the lock mechanism (if present) or tightening the mounting screw.
Nota ta' Kompatibbiltà: The AF970 is compatible with hot shoe interfaces for Canon, Nikon, Panasonic Lumix, Olympus, Pentax, and Fujifilm cameras. It is not suitable for Sony cameras.
Immaġni: Eżamples of compatible hot shoe interfaces.
Important Caveat for Canon Cameras: Canon models 1500D, 3000D, and 200D Mark II have cancelled the hot shoe in the middle of the universal contact. These models cannot use the single-contact universal hot shoe flash and flash guide. For these specific Canon models, a dedicated hot shoe interface X1 flash trigger may be required.
Image: Universal contacts vs. no universal contacts on hot shoes.
Modi Operattivi
The AF970 Speedlight offers several operating modes to suit different shooting requirements:
Image: Flash mode descriptions.
- M (Manual Flash) Mode: Allows you to manually adjust the flash power from 1/128 to 1/1 in 8 stops, with two fine-tuning compensation steps per stop. This mode provides precise control over light output according to your shooting environment.
- S1 (Receive Flash) Mode: The flash acts as a slave unit, triggered by the main flash from another unit. It receives signals from the main light source to emit a flash.
- S2 (Receive Flash) Mode: Similar to S1, but designed to ignore the pre-flash of a master flash unit, effectively preventing premature triggering in situations where the master flash emits a pre-flash for exposure measurement.
- Multi (Repeating Flash/Strobe) Mode: This mode uses a slow shutter for continuous shooting, capturing the continuous movement of an object in a dark environment. The flash fires multiple times during a single exposure, creating a series of staggered and orderly impacts that are usually not observable.
Image: Multi Flash Mode in action, capturing continuous movement.
To switch between modes, press the "MODE" button on the flash unit.
Karatteristiċi
- Sistema Wireless X 2.4G integrata: The AF970 features a built-in 2.4G wireless receiver, allowing it to be easily triggered wirelessly with a compatible flash trigger. This enables flexible multi-flash setups.
- Skrin LCD: A liquid crystal digital display provides precise parameter control, offering 24 brightness fine-tuning steps for accurate light adjustment.
- Lenti ta' Fresnel: Designed for stronger focus and uniform light emission, ensuring no significant difference in brightness at the four corners of the frame.
- Optical Receiver: Equipped with its own light control receiver, the flash can be triggered by the main light source at any time, facilitating light-controlled flash triggering.
- Angolu tal-Isparar Flessibbli: The flash head can be rotated vertically from 0 to 90 degrees and horizontally from 0 to 270 degrees, allowing for a variety of angles to fill light and improve shooting efficiency.
- Ħin ta' Riċiklaġġ malajr: Full power output recycle time is approximately 2.9 seconds (with new batteries).
- High-Speed Continuous Shooting Support: Supports high-speed continuous shooting at 1/16 brightness and below (up to 12 frames per second).
- Modalità ta' Iffrankar tal-Enerġija: The backlight turns off after 20 seconds of inactivity. The CPU automatically enters sleep mode after 60 seconds and shuts down after 30 minutes of no operation.
- Protezzjoni mis-sħana żejda: Built-in temperature detection prevents overheating during extended use.
- Second-Curtain Sync Support: Allows for creative effects by firing the flash at the end of a slow shutter exposure, useful for capturing motion trails.
Image: 2.4G Wireless X System setup.
Image: LCD screen displaying flash power settings.
Image: Fresnel lens and optical receiver details.
Image: Flexible shooting angle demonstration.
Manutenzjoni
To ensure the longevity and optimal performance of your Ambitful AF970 Speedlight, follow these maintenance guidelines:
- Tindif: Use a soft, dry cloth to clean the exterior of the flash unit. For the flash tube and LCD screen, use a lens cleaning cloth. Avoid using harsh chemicals or abrasive materials.
- Kura tal-batterija: Remove batteries when the flash is not in use for extended periods to prevent leakage. Use high-quality AA alkaline or Ni-MH rechargeable batteries.
- Ħażna: Store the speedlight in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Use the provided storage bag for protection.
- Kuntatti taż-Żarbun Sħun: Keep the hot shoe contacts clean and free from dust or debris to ensure proper communication with your camera.
Issolvi l-problemi
If you encounter issues with your AF970 Speedlight, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-flash ma jisparax |
|
|
| Flash fires but exposure is incorrect |
|
|
| Flash overheats and stops working |
|
|
| Wireless triggering not working |
|
|
Speċifikazzjonijiet
The following are the technical specifications for the Ambitful AF970 Speedlight:
Image: Detailed specifications table.
| Parametru | Valur |
|---|---|
| Mudell | AF970 |
| Numru ta' Gwida | 35 meters (ISO 100, 35mm focal length) |
| Disinn taċ-ċirkwit | Tranżistor Bipolari ta' Bieb Iżolat (IGBT) |
| Modalità Flash | M / MULTI (Repeating) / S1 / S2 |
| Medda taż-Żum | 35mm |
| Angolu ta 'Rotazzjoni Vertikali | 0 sa 90 grad |
| Angolu ta 'Rotazzjoni Orizzontali | 0 sa 270 grad |
| Provvista tal-Enerġija | 4x AA Batteries (Alkaline or Ni-MH) |
| Kontroll tal-Flash | 8 steps (1/128-1/1) |
| Ħin tar-riċiklaġġ | 0.1-5s |
| Ħin tad-Dawl | 100-1500 times (using AA alkaline cell, 2800mAh Battery) |
| Temperatura tal-Kulur | 5600K ± 100K |
| It-Tul tal-Flash | 1/200s ~ 1/20000s |
| Flash bla fili | S1, S2 |
| Distanza ta' Triggering bla Fili | 20-30m indoor, 10-15m outdoor |
| Funzjonijiet Addizzjonali | PC synchronous, Sniff mode, Over temperature protection, Test Button, Light Flash, 2.4G Wireless Flash |
| Dimensjonijiet (WxHxD) | 60 x 205 x 75mm |
| Piż Nett | 390g |
Image: Physical dimensions of the speedlight.
Għajnuniet għall-Utent
- Esperimenta bil-Modi: Don't hesitate to try out the different flash modes (M, S1, S2, Multi) to understand their effects and find the best one for your specific shooting scenario.
- Setup bla fili: For off-camera flash, ensure your wireless trigger and the AF970 Speedlight are set to the same channel and group for reliable communication.
- Ħajja tal-batterija: Always carry spare AA batteries or fully charged Ni-MH batteries, especially during long shooting sessions, as flash units consume power quickly.
- Użu tad-diffużur: Use the included diffuser to soften the light and reduce harsh shadows, which is particularly useful for portrait photography or close-up shots.
- Aġġustament tal-Angolu: Utilize the flexible rotation of the flash head to bounce light off ceilings or walls for a softer, more natural lighting effect.
Garanzija u Appoġġ
The Ambitful AF970 Speedlight comes with a warranty as specified by the manufacturer. Please refer to the Warranty Card included in your package for details on coverage and terms. For technical support or service inquiries, please contact your retailer or the Ambitful customer service department.
