Manwal tal-Utent tat-Tracker tal-Wajers Multifunzjonali NOYAFA NF-825 TMR

1. Introduzzjoni

The NOYAFA NF-825 TMR is a versatile and powerful tool designed for professionals and DIY enthusiasts alike, offering comprehensive solutions for wire tracing, network cable testing, and electrical circuit analysis. This multifunctional device combines a transmitter (NF-825T), a receiver (NF-825R), and a socket tester (NF-825M) to accurately detect hidden wires, locate underground wire breakpoints, find socket switch positions, trace cables on PoE switches, perform NCV detection, and conduct socket tests. This manual provides detailed instructions to ensure safe and efficient operation of your NF-825 TMR.

Image: NOYAFA NF-825 TMR Transmitter and Receiver units.

2. Prodott Aktarview

2.1 Komponenti

The NF-825 TMR system consists of three main units:

• Transmitter (NF-825T): Used to inject a signal into the wire or circuit being traced.
• Receiver (NF-825R): Used to detect the signal emitted by the transmitter, allowing for tracing and locating.
• Socket Tester (NF-825M): A plug-in unit for testing electrical sockets.

Image: The three main components of the NF-825 TMR system: Transmitter, Socket Tester, and Receiver.

The complete toolkit typically includes:

• NF-825T Transmitter
• NF-825R Receiver
• NF-825M Socket Tester
• Exclusive Accessory Cable
• Multimeter Adapter Cable
• C04 Alligator Clip
• Kejbil tal-Iċċarġjar tat-Tip C
• 825TMR Toolkit Carrying Case
• Manwal għall-Utent

Image: Contents of the NOYAFA 825TMR Toolkit.

2.2 Karatteristiċi

• Detects hidden wires in live circuits.
• Locates underground wire breakpoints.
• Finds socket switch positions.
• Traces cables on PoE switches.
• Mhux Kuntatt VoltagSejbien ta' e (NCV).
• Performs comprehensive socket tests.
• Equipped with LED lights for visibility in low-light areas.
• Type-C fast charging.
• Adjustable sensitivity on the receiver.

3. Setup

3.1 Iċċarġjar tal-Apparati

Before first use, ensure both the Transmitter (NF-825T) and Receiver (NF-825R) are fully charged using the provided Type-C charging cable. Connect the cable to the Type-C charging port on each device and a suitable USB power adapter (not included).

Image: Both the Transmitter and Receiver can be charged via Type-C ports.

3.2 Identifying Buttons and Ports

Familiarize yourself with the layout of the devices:

Image: Detailed diagram showing the buttons, ports, and indicators on the Transmitter, Socket Tester, and Receiver.

• Transmitter (NF-825T): Power button, SCAN/Live/OFF switch, Network cable tracking port, Strong electricity tracking ports (positive/negative electrode), Type-C charging port, 3-pin Power Plug (for Socket Tester).
• Receiver (NF-825R): Power button, Sensitivity switch (1-9), SCAN button, Socket button, NCV button, Lighting switch, Probe, Signal indicator (1-3), Power indicator, Type-C charging port.
• Socket Tester (NF-825M): GFCI button, LED indicators for various wiring conditions (Correct, Open Hot, Open Ground, Live & Neu Rev, Open Neutral, Live/Grd Rev, Open Grd, Live & Grd Rev).

4. Istruzzjonijiet Operattivi

4.1 Network Cable Tracking Mode

1. Connect the network cable to be traced to the "Network cable Tracking" port on the Transmitter (NF-825T).
2. Turn on the Transmitter and set the switch to "SCAN" mode.
3. Turn on the Receiver (NF-825R) and press the "SCAN" button.
4. Adjust the sensitivity switch on the Receiver to an appropriate level.
5. Move the Receiver's probe along the suspected path of the cable. The signal indicators and audible tone will guide you to the target cable.

Image: Tracing a network cable connected to a PoE switch using the NF-825 TMR.

Image: Using the Transmitter and Receiver to locate a network cable.

Image: The Receiver's signal indicators turn green when approaching the target cable.

4.2 Strong Electricity Tracking (Detecting Hidden Wires)

1. Connect the Transmitter (NF-825T) to the live circuit using the appropriate accessory cables (e.g., multimeter adapter cable with alligator clips).
2. Set the Transmitter switch to "Live" mode.
3. Turn on the Receiver (NF-825R) and adjust the sensitivity.
4. Scan the area where hidden wires are suspected. The Receiver will indicate the presence of live wires through visual and audible signals.

Image: Using the Receiver to detect hidden wires in a live circuit.

Image: Illustration of the device's wire detection capabilities, including transmit distance (200m), detection distance (0-0.5m), and transmit frequency (157KHz).

4.3 Socket Test

1. Plug the Socket Tester (NF-825M) into the electrical outlet you wish to test.
2. Observe the LED indicators on the Socket Tester. Refer to the table below for interpretation of the LED patterns.
3. If the GFCI button is present and you wish to test the Ground Fault Circuit Interrupter, press the GFCI button. The circuit should trip if the GFCI is functioning correctly.

Image: Socket Tester (NF-825M) in use, with a table explaining the LED indicator patterns for various wiring conditions.

4.4 NCV (Mhux Kuntatt Voltage) Sejbien

1. Turn on the Receiver (NF-825R).
2. Press the "NCV" button.
3. Bring the probe end of the Receiver close to an AC voltage source (e.g., live wire, electrical outlet).
4. The Receiver will indicate the presence of AC voltage through visual (LEDs) and audible signals without direct contact.

Image: Using the NCV Induction Pen feature of the Receiver to detect live wires.

4.5 Air Circuit Breaker Tracking Mode

This mode helps identify which circuit breaker controls a specific outlet or circuit.

1. Plug the Transmitter (NF-825T) into the electrical outlet of the circuit you want to identify.
2. Ensure the Transmitter is powered on and in the appropriate tracking mode (e.g., "Live" or "SCAN" depending on the specific function).
3. Go to the circuit breaker panel.
4. Turn on the Receiver (NF-825R) and adjust its sensitivity.
5. Move the Receiver's probe along the circuit breakers. The Receiver will emit a strong signal when it detects the correct breaker connected to the Transmitter.

Image: Using the NF-825 TMR to track an air circuit breaker.

5. Manutenzjoni

• Tindif: Imsaħ l-apparati b'ċarruta niexfa u ratba. Tużax prodotti tat-tindif jew solventi li joborxu.
• Ħażna: Store the NF-825 TMR in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
• Kura tal-batterija: Recharge the devices regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the batteries for extended periods.
• Protezzjoni tas-Sonda: Ensure the Receiver's probe is protected from damage when not in use.

6 Issolvi l-problemi

• Ebda Qawwa: Ensure devices are fully charged. Check the power switch position.
• Ebda Sinjal/Sinjal Dgħajjef:
  • Verify the Transmitter is correctly connected and powered on.
  • Adjust the Receiver's sensitivity to a higher level.
  • Ensure the Receiver's probe is close enough to the target wire/cable.
  • Check for strong electromagnetic interference in the area.
• Inaccurate Socket Test Results:
  • Ensure the Socket Tester is fully inserted into the outlet.
  • Confirm the outlet is live and functioning.
• Dwal LED ma Jaħdmux: Check if the lighting switch on the Receiver is activated.

7. Speċifikazzjonijiet

Image: Approximate dimensions of the Transmitter and Receiver units.

8. Għajnuniet għall-Utenti

• Aġġusta s-Sensittività: For precise tracing, start with a lower sensitivity setting on the Receiver and gradually increase it until a clear signal is detected. This helps to minimize interference from adjacent wires.
• Fatturi Ambjentali: Be aware that thick walls, metal conduits, or other strong electromagnetic fields can affect tracing accuracy and detection distance.
• Is-Sigurtà l-Ewwel: Always exercise caution when working with live electrical circuits. If unsure, consult a qualified electrician.
• LED Light Utility: Utilize the built-in LED light on the Receiver for improved visibility in dark work environments, such as behind panels or in crawl spaces.

Image: The Receiver's LED light provides illumination in low-light conditions.

Image: Illustrates various applications including wall tracking, floor tracking, and NCV detection.

9. Garanzija u Appoġġ

For any questions, technical support, or warranty inquiries regarding your NOYAFA NF-825 TMR, please contact the manufacturer or seller directly. You may reach out via the following contact information:

• WhatsApp: +86 18974942107
• E-mail: Planetorange@163.com

Please provide your product model number (NF-825 TMR) and a detailed description of your issue when contacting support for faster assistance.