VEVOR Ruida 100W CO2 Laser Engraving Machine KH9060 User Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation of your VEVOR Ruida 100W CO2 Laser Engraving Machine, model KH9060. This machine is designed for high-precision engraving and cutting of various non-metal materials such as wood, bamboo, plexiglass, crystal, leather, rubber, marble, and glass. It is an ideal tool for industries including advertisement, gifts, shoes, and toys.

The machine is equipped with a RUIDA board and is compatible with LightBurn software (not included). It supports multiple graphic formats, including HPGL, BMP, GIF, JPG, JPEG, DXF, DST, and AI.

Figure 1: VEVOR KH9060 Laser Engraving Machine Overview

2. Informazzjoni dwar is-Sigurtà

WARNING: Laser radiation can cause severe injury. Always follow safety precautions.

• Never operate the machine with the protective cover open unless absolutely necessary for maintenance and with appropriate eye protection.
• Ensure proper ventilation to remove smoke and fumes generated during operation.
• Do not engrave or cut materials that produce toxic fumes or are flammable.
• Always use the included air exhaust fan and smoke pipe.
• Ensure the water pump is functioning correctly to cool the laser tube.
• Żomm idejk u ħwejjeġ maħlula 'l bogħod mill-partijiet li jiċċaqalqu waqt it-tħaddim.
• In case of emergency, press the red 'EMERGENCY STOP' button immediately.
• This machine is designed for non-metal materials. Do not attempt to engrave or cut metal.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1 x Laser Engraver (Main Unit)
• 1 x Laser Engraving Software Package (English Version)
• 1 x User Manual (CD)
• 1 x Pompa tal-Ilma
• 1 x Air Exhaust Fan
• 1 x Pompa ta 'l-Ajru
• 1 x Communication Cable
• 3 x Reflect Optics (pre-installed in the machine)
• 1 x Focus Optics (pre-installed in the machine)
• 1 x Laser Tube (pre-installed in the machine)
• Additional accessories (e.g., wrenches, tubes, power cables)

Figura 2: Aċċessorji Inklużi

4. Speċifikazzjonijiet

Figure 3: Machine Dimensions (59" x 42.5" x 43.3" with 35.4" x 23.6" engraving area)

5. Setup

5.1 Spakkjar u Tqegħid

1. Carefully unpack the laser engraving machine and all accessories.
2. Place the machine on a stable, level surface. The machine is equipped with caster wheels for convenient movement, which can be locked once positioned.
3. Ensure adequate space around the machine for ventilation and access. The machine has doors that can be opened to accommodate larger materials.

5.2 Aċċessorji tal-Konnessjoni

• Pompa tal-Ilma: Connect the water pump to the laser tube's cooling system. Ensure the water pump is submerged in a container of distilled water. This is crucial for cooling the CO2 laser tube and extending its lifespan.
• Pompa tal-arja: Connect the air pump to the air assist nozzle on the laser head. This helps to blow away debris and prevent flames during cutting.
• Exhaust Fan & Smoke Pipe: Connect the exhaust fan and smoke pipe to the machine's exhaust port. Route the smoke pipe to an outdoor vent or a suitable filtration system to remove fumes.

5.3 Installazzjoni u Konnettività tas-Softwer

1. Install the provided laser engraving software (RD Works V8) from the included CD onto your computer. The machine is also compatible with LightBurn software (not included).
2. Connect the machine to your computer using the provided USB communication cable. The machine features a USB input port for direct connection.
3. Alternatively, you can transfer design files to the machine via a U-disk (USB flash drive) by inserting it into the U-disk port.
4. A network interface port is also available for network connectivity.

Figure 4: USB & U-Disk Connectivity

6. Operazzjoni

6.1 Designing and Software

• Create your designs using compatible software such as LightBurn, CorelDRAW, or AutoCAD.
• The RD Works V8 software features 128MB memory and supports 2000dpi high accuracy.
• You can set different parameters (e.g., power, speed) for different colors within your design for varied engraving/cutting effects.

Figure 5: Digital Control Panel and Software Compatibility

6.2 Tagħbija ta' Materjal

1. Open the machine's protective cover.
2. Place your material on the honeycomb working table. The 90x60cm large working surface provides ampl-ispazju.
3. Adjust the focus of the laser head according to the material thickness. The premium laser head ensures improved engraving precision.
4. Close the protective cover before starting any operation.

6.3 Bl-użu tal-Panew tal-Kontroll

The RDC 6442G precise control panel supports multiple languages (English, French, German, Italian, Spanish, and more). Use the buttons to navigate menus, set parameters, and control the laser operation.

6.4 Engraving/Cutting Process

1. Once your design is loaded and parameters are set, initiate the job from the software or directly from the machine's control panel.
2. The CO2 laser tube will emit a laser beam, guided by the reflect and focus optics, to engrave or cut the material.
3. Monitor the process through the transparent protective cover.

Figure 6: CO2 Laser Tube

Figure 7: Premium Laser Head

7. Manutenzjoni

7.1 Tindif Regolari

• Regularly clean the optics (mirrors and lens) with appropriate cleaning solutions and wipes to ensure optimal laser performance.
• Clean the honeycomb working table to remove debris and residue.
• Keep the interior of the machine free from dust and particles.

7.2 Cooling System Check

• Ensure the water pump is always functioning and the water level in the cooling reservoir is adequate.
• Periodically replace the water in the cooling system to prevent algae growth and maintain cooling efficiency.
• Verify that the built-in cooling fan is operating to reduce the temperature of internal components.

7.3 Laser Tube Inspection

• The CO2 laser tube has a lifespan of approximately 2000-4000 hours. Monitor its performance and consider replacement when output power significantly decreases.
• Handle the laser tube with extreme care if replacement is necessary.

Figure 8: Well-Designed Details (Cooling Fan, Switches, Reflector)

8 Issolvi l-problemi

8.1 Kwistjonijiet Komuni u Soluzzjonijiet

• L-ebda Ħruġ tal-Laser: Check if the laser tube is properly connected, the water pump is running, and the power supply is adequate. Ensure all safety interlocks are engaged (e.g., protective cover closed).
• Kwalità Fqira tal-Inċiżjoni/Qtugħ: Verify laser focus, clean optics, check laser power settings, and ensure material is flat and properly secured.
• Il-Magna Mhux qed Tirrispondi: Check USB or network connection. Restart the machine and computer. Ensure the software is correctly installed and communicating with the machine.
• Is-sħana żejda: Ensure the water pump is circulating water effectively and the exhaust fan is clearing hot air. Check for blockages in the cooling system.

9. Għajnuniet għall-Utenti

• Kompatibbiltà tal-Materjal: This CO2 laser engraver is designed for non-metal materials. It cannot cut or engrave materials like gold or silver. Refer to the specifications for engraving depth capabilities, which vary depending on the material and power settings.
• Software Familiarity: Take time to familiarize yourself with the RD Works V8 software or LightBurn to maximize the machine's potential and achieve desired results.
• Qatgħat tat-Test: Always perform small test cuts or engravings on scrap material to fine-tune settings before working on your final project.

10. Garanzija u Appoġġ

VEVOR provides a one-year warranty for this product. For any after-sales problems or technical support, please contact VEVOR customer service. Refer to the contact information provided with your purchase documentation.