1. Introduzzjoni
Thank you for choosing the Firecore FD30 Laser Level Receiver Detector. This device is designed to extend the working range and improve the visibility of your Firecore laser level's beam, especially in bright light conditions or over long distances. Please read this manual carefully before operation to ensure safe and efficient use.
2. Informazzjoni dwar is-Sigurtà
- This receiver is designed for use with compatible Firecore laser levels only.
- Ensure your laser level is in pulse mode when using the receiver.
- Tippruvax tiżżarma jew timmodifika l-apparat.
- Żomm l-apparat 'il bogħod mill-ilma u temperaturi estremi.
- Armi l-batteriji b'mod responsabbli skont ir-regolamenti lokali.
3. Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- 1 x Firecore FD30 Laser Level Receiver
- 1 x Cl aġġustabbliamp
- 2 x Batteriji AAA 1.5V
- 1 x Manwal tal-Utent (dan id-dokument)
Figure 3.1: Package Contents - FD30 Receiver, Adjustable Clamp, and Batteries.
4. Prodott Aktarview
Familiarize yourself with the components of your FD30 receiver:
Figura 4.1: Quddiem u wara View of the FD30 Receiver with Labeled Parts.
Komponenti Ewlenin:
- Sensing Window: Detects the laser beam.
- Indikatur tal-Enerġija: Juri l-istatus tal-apparat.
- Built-in Bubble Vials: Two vials (front and top) for accurate leveling.
- Indikatur tal-Buzzer: Emits audible signals.
- ON/OFF Sound Switch: Controls the buzzer sound.
- Middle Cating Slot: Central alignment point.
- Front Datum Line: Reference line on the front.
- Back Datum Line: Reference line on the back.
- Kalamita: For magnetic adsorption to metal surfaces.
- Immuntar bil-Ħajta ta' 1/4"-20: For attaching to tripods or other accessories.
- Kompartiment tal-batterija: Holds 2x AAA 1.5V batteries.
Figure 4.2: LED Displays on the Front and Back of the Receiver.
The receiver features LED displays on both the front and back, providing clear visual feedback on the laser line's position. The front display is ideal for direct viewing, while the back display allows for easier monitoring when the receiver is mounted or facing away from the user.
5. Setup
5.1 Installazzjoni tal-batterija
- Locate the battery compartment on the rear of the FD30 receiver.
- Iftaħ l-għatu tal-kompartiment tal-batterija.
- Insert 2x AAA 1.5V batteries, ensuring correct polarity (+/-).
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Video 5.1: Demonstration of battery installation and bracket attachment.
5.2 Attaching the Adjustable Clamp
Il aġġustabbli clamp allows for versatile mounting options:
- Align the receiver with the clamp's mounting slot.
- Slide the receiver into the clamp sakemm tikklikkja f'postha.
- Use the knob on the clamp to tighten and secure the receiver.
- Il-clamp can be rotated 360 degrees for optimal positioning.
Figure 5.2: Adjustable Clamp with 360-degree Rotation.
6. Istruzzjonijiet Operattivi
6.1 Tixgħel/Jitfi
Press the power button on the receiver to turn it on or off. The power indicator light will illuminate when the device is active.
6.2 Activating Pulse Mode on Laser Level
Before using the FD30 receiver, ensure your Firecore laser level is set to pulse mode. Refer to your laser level's manual for instructions on how to activate this mode. The receiver operates at a frequency of 10KHz, which is compatible with Firecore laser levels' pulse mode.
Figure 6.1: Ensure Laser Level is in Pulse Mode (10KHz).
6.3 Detecting Laser Lines
- Turn on your Firecore laser level and activate its pulse mode.
- Turn on the FD30 receiver.
- Move the receiver slowly up or down in the area where you expect the laser line to be.
- The receiver will provide visual and audible feedback:
- Datum lower than laser line: The top arrow on the display will light up, and the buzzer will emit a continuous fast beep. Move the receiver upwards.
- Datum higher than laser line: The bottom arrow on the display will light up, and the buzzer will emit a continuous slow beep. Move the receiver downwards.
- When datum is in line with laser line: The middle LED indicator light will display in green, and the buzzer will emit a steady tone. This indicates the precise location of the laser line.
Figure 6.2: Precise Optical Signals for Laser Line Detection.
6.4 Adjusting Buzzer Volume
The FD30 receiver features a buzzer for audible feedback. To adjust the volume (Loud/Soft/Mute), long-press the ON/OFF Sound Switch button.
Figure 6.3: Buzzer Volume Adjustment for Noisy Environments.
6.5 Itfi Awtomatiku
The receiver will automatically shut off after approximately 10 minutes of inactivity to conserve battery life.
6.6 Multiple Scenarios for Use
The FD30 receiver can be used in various scenarios:
- Magnetic Adsorption (Side/Top): The built-in magnets allow the receiver to be attached to metal surfaces, such as steel studs or beams, both on the side and top.
- Using Bracket (Including/Excluding): Il aġġustabbli clamp can be used to mount the receiver to grade rods, wooden poles, or other non-magnetic surfaces. The 1/4" mounting thread on the receiver also allows direct attachment to compatible accessories without the clamp.
Figure 6.4: Versatile Mounting Options for the FD30 Receiver.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | FD30 |
| Isem tad-Ditta | Firecore |
| Piż Nett | Appross. 300g-400g |
| Daqs | 19.00 * 9.00 * 8.00cm |
| Distanza tax-Xogħol | 2-60 metru (6-200 pied) |
| Tip ta 'batterija | 2 x AAA 1.5V |
| Irċievi Frekwenza | 10KHz |
| Provvisti DIY | Xogħol tal-injam |
| Ċertifikazzjoni | CE |
| Oriġini | Iċ-Ċina kontinentali |
7.1 Mudelli Kompatibbli
The FD30 receiver is compatible with the following Firecore laser levels:
- F93T-XG
- F94T-XG
- F95T-XG
- F504T-XG
- F95T-3G
- F95T-4G
- F113-XG
- F113-XR
- F303T-XG
- F304T-XG
- FIR411G
- G30
- G50
- G60
Figure 7.1: FD30 Compatible Firecore Laser Level Models.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Receiver not turning on | Batteriji mejta jew installati ħażin | Iċċekkja l-polarità tal-batterija, ibdel b'batteriji AAA ġodda. |
| No laser line detection | 1. Laser level not in pulse mode. 2. Receiver too far from laser. 3. Incorrect laser level brand. | 1. Activate pulse mode on your Firecore laser level. 2. Move receiver closer to the laser source. 3. Ensure you are using a compatible Firecore laser level. |
| Buzzer not sounding | Buzzer is muted. | Long-press the ON/OFF Sound Switch button to unmute or adjust volume. |
| Qari mhux eżatt | Receiver not held steady or level. | Use the built-in bubble vials to ensure the receiver is level. Mount it securely with the clamp jekk possibbli. |
9. Manutenzjoni
- Clean the sensing window and exterior of the receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Neħħi l-batteriji jekk l-apparat ma jkunx se jintuża għal perjodu estiż biex tevita t-tnixxija.
- Store the receiver in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
10. Għajnuniet għall-Utenti
- Always ensure your laser level is in pulse mode for the receiver to function correctly. This is a common oversight.
- For best results in very bright conditions, try to shade the area where you are detecting the laser line.
- The magnetic attachment is very useful for hands-free operation on metal surfaces.
- Utilize the adjustable clamp for precise positioning on grade rods or other non-magnetic materials.
11. Garanzija u Appoġġ
Firecore products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact Firecore Official Store customer service. Keep your purchase receipt as proof of purchase.
