Smart Temperature Switch User Manual

1. Prodott Aktarview

The Scimagic-RC TYTE-D1 Smart Temperature Switch is a versatile device designed for intelligent temperature monitoring and control. It integrates WiFi and RF 433MHz communication, allowing for remote management via a mobile application and compatibility with smart home assistants. The device comes with a high-accuracy waterproof stainless steel temperature sensor, making it suitable for a wide range of applications requiring precise temperature regulation.

Figure 1: Smart Temperature Switch with Sensor and Packaging

Karatteristiċi ewlenin:

• Kontroll tal-App: Free iOS and Android mobile App (Tuya Smart / Smart Life) for remote monitoring and control.
• Monitoraġġ f'ħin reali: Displays real-time temperature and power status.
• Remote ON/OFF: Control connected electrical devices from anywhere.
• Sensor tat-temperatura: High-accuracy waterproof stainless steel temperature probe.
• Ħin u Skedar: Supports countdown, single, and repeat timing tasks.
• Modalità Awtomatika: Automatically turns devices on/off based on a specified temperature range.
• Integrazzjoni ta' Xena Intelliġenti: Temperature values can trigger other Tuya smart devices.
• Kontroll tal-Vuċi: Kompatibbli ma 'Amazon Alexa u Google Home.
• RF 433MHz: Supports RF remote control for local operation.

2. Kontenut tal-Pakkett

Figura 2: Kontenut tal-Pakkett

• 1 x Smart Switch (TYTE-D1)
• 1 x Waterproof Temperature Sensor
• 1 x Manwal għall-Utent bl-Ingliż

3. Istruzzjonijiet ta' Setup

3.1 Il-wajers tas-Swiċċ Intelliġenti

TWISSIJA: Ensure power is disconnected before performing any wiring. Incorrect wiring can cause damage to the device or electrical shock.

Figure 3: Smart Switch Wiring Terminals

1. Connect the live wire (L) from your power source to the 'IN L' terminal on the smart switch.
2. Connect the neutral wire (N) from your power source to the 'IN N' terminal on the smart switch.
3. Connect the live wire (L) of your appliance to the 'OUT L' terminal on the smart switch.
4. Connect the neutral wire (N) of your appliance to the 'OUT N' terminal on the smart switch.
5. Plug the waterproof temperature sensor into the designated port on the smart switch.

3.2 Installazzjoni u Tqabbil tal-App

The Smart Switch works with the Tuya Smart or Smart Life app. Download the app from the App Store (iOS) or Google Play Store (Android).

Figure 4: Tuya Smart and Smart Life App Logos

Follow these steps to connect the device to the app:

Figura 5: Passi ta' Konnessjoni tal-App

1. Open the Tuya Smart / Smart Life app and tap 'Add Device'.
2. Select 'Quick Pairing' or 'Add Manually' and choose 'Temperature Control Switches' under the 'Electrician' category.
3. Daħħal l-isem u l-password tan-netwerk Wi-Fi 2.4GHz tiegħek.
4. Follow the on-screen prompts to put the device into pairing mode (usually by long-pressing the reset button until the LED blinks).
5. Once the device is detected and added, you can rename it and assign it to a room.
6. Tap 'Done' to complete the pairing process.

3.3 RF Remote Control Programming

The Smart Switch supports RF 433MHz remote control. To program a remote:

1. Long press the thermostat button on the Smart Switch for 2-3 seconds. The LED light will change from red to blue.
2. Click the desired programming button on your remote control for 1 second.
3. You will hear a clicking sound from the thermostat, indicating successful programming.

4. Istruzzjonijiet Operattivi

4.1 App Remote Control and Monitoring

Once connected to the app, you can remotely monitor the temperature and control the switch from anywhere.

Figura 6: Interfaċċja tal-Kontroll mill-Bogħod tal-App

The app provides real-time temperature readings from the connected sensor. You can turn the connected device ON or OFF directly from the app.

4.2 Temperature Control Modes

The Smart Switch offers both automatic and manual temperature control modes.

Figure 7: Temperature Control Settings

• Modalità Awtomatika: Set a desired temperature range. The switch will automatically turn ON or OFF to maintain the temperature within this range. This is ideal for heating or cooling applications.
• Modalità Manwali: Allows immediate ON/OFF control of the connected device, overriding any set temperature ranges.

4.3 Setting Temperature Alerts

You can configure the app to send alerts when the temperature exceeds or falls below a set threshold.

1. Fl-app, mur fis-settings tal-apparat.
2. Enable 'Turn on alert'.
3. Set the 'High temperature alarm' and 'Low temperature alarm' values.
4. The phone will send a reminder when the temperature exceeds the set maximum or falls below the set minimum.

4.4 Ħin u Skedar

Use the app to set schedules for your devices.

Figure 8: Timer & Schedule Settings

• Supports 8 enabled countdown/single/repeat timing tasks.
• Set specific times for devices to turn ON or OFF automatically.

4.5 Kontroll tal-Vuċi

Integra ma' Amazon Alexa jew Google Home għal kontroll mingħajr idejn.

Figura 9: Integrazzjoni tal-Kontroll tal-Vuċi

1. Link your Tuya Smart / Smart Life account to your Alexa or Google Home app.
2. Skopri apparati.
3. Use voice commands like "Alexa, turn on the lights" or "Hey Google, set the temperature to 25 degrees."

4.6 Kondiviżjoni tal-Familja

Aqsam il-kontroll tas-swiċċ intelliġenti mal-membri tal-familja permezz tal-app.

Figure 10: Family Sharing

5. Manutenzjoni

• Tindif: Wipe the smart switch and sensor with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Kura tas-Sensor: Ensure the waterproof temperature sensor is clean and free from debris for accurate readings. Avoid bending or damaging the probe.
• Aġġornamenti tal-Firmware: Periodically check the Tuya Smart / Smart Life app for available firmware updates to ensure optimal performance and security.

6 Issolvi l-problemi

• Apparat Mhux Konnessjoni mal-Wi-Fi:
  • Kun żgur li n-netwerk Wi-Fi tiegħek huwa 2.4GHz. L-apparat ma jappoġġjax Wi-Fi ta' 5GHz.
  • Iċċekkja jekk il-password tal-Wi-Fi li daħħalt fl-app hijiex korretta.
  • Kun żgur li l-apparat jinsab fil-firxa tar-router Wi-Fi tiegħek.
  • Ipprova resetja l-apparat u erġa' pprova l-proċess ta' tqabbil.
• Qari tat-Temperatura Mhux Preċiż:
  • Ensure the temperature sensor is properly connected to the smart switch.
  • Verify the sensor probe is fully immersed or positioned correctly in the environment you wish to monitor.
  • Check for any physical damage to the sensor cable or probe.
• Il-Kontroll mill-bogħod Mhux Jaħdem:
  • Ensure the RF remote control is properly programmed to the smart switch (refer to Section 3.3).
  • Check the battery in the RF remote control.
  • Make sure there are no obstructions between the remote and the smart switch.
• Kwistjonijiet ta' Kontroll tal-Vuċi:
  • Confirm that your Tuya Smart / Smart Life account is correctly linked to your Alexa or Google Home app.
  • Ensure the device is named clearly in the app for easy voice recognition.
  • Check your internet connection for both the smart switch and your voice assistant device.

7. Speċifikazzjonijiet

Figure 11: Smart Switch Dimensions and Specifications

8. Għajnuniet għall-Utenti

• Pożizzjonament Ottimali tas-Sensor: For the most accurate temperature readings, place the waterproof sensor directly in the environment you wish to monitor (e.g., water in a fish tank, soil in a greenhouse).
• Stabbiltà tal-Wi-Fi: Ensure your smart switch is installed in an area with strong 2.4GHz Wi-Fi signal to prevent disconnections and ensure reliable remote control.
• Smart Scene Automation: Leverage the 'Smart Scene' feature in the Tuya app to create advanced automations. For example, set up a scene to turn on a fan if the temperature exceeds a certain level, or activate a heater if it drops too low.
• Ċarezza tal-Kmand tal-Vuċi: When using Alexa or Google Home, use clear and concise commands. Ensure the device name in your smart home app is easy for the voice assistant to understand.
• Verifiki Regolari tal-App: Periodically open the Tuya Smart / Smart Life app to check the device status, review temperature history, and ensure all automations are functioning as expected.

9. Garanzija u Appoġġ

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or contact your retailer. For technical support, troubleshooting assistance, or inquiries about product functionality, please reach out to the manufacturer's customer service or your point of purchase.

Figura 12: Ċertifikazzjonijiet tal-Prodott (CE, RoHS)