1. Introduzzjoni
The LOFREE TOUCH Mechanical Keyboard is a versatile input device designed for enhanced typing experience and personalization. It features triple-mode connectivity, hot-swappable switches, and compatibility with multiple operating systems. This manual provides essential information for setting up, operating, and maintaining your keyboard.
Figure 1: LOFREE TOUCH 68-key Mechanical Keyboard
2. Kontenut tal-Pakkett
Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:
- LOFREE TOUCH Keyboard (68-key or 100-key) x 1
- Manwal għall-Utent x 1
- Karta tal-garanzija x 1
- 2.4G Wireless Receiver x 1
- AAA Battery x 3 (pre-installed or included separately)
- Kejbil tat-Tip C x 1
- Kaxxa tal-Aċċessorji x 1
- Keycap Puller x 1
- Holder x 1 (for figurines/extra keycaps)
Figure 2: Battery compartment and 2.4G receiver storage
3. Setup
3.1. Powering On and Battery Installation
- Sib il-kompartiment tal-batterija fuq in-naħa ta’ taħt tat-tastiera.
- Daħħal 3 batteriji AAA, filwaqt li tiżgura polarità korretta.
- The keyboard can also be powered via the Type-C cable for wired mode and charging (if rechargeable batteries are used).
3.2. Konnessjoni tat-Tastiera Tiegħek
The LOFREE TOUCH keyboard supports three connection modes: Bluetooth 5.0, 2.4G Wireless, and Wired (Type-C).
Figura 3: Għażliet ta' Konnettività
3.2.1. Konnessjoni bla fili 2.4G
- Locate the 2.4G wireless receiver, usually stored in the battery compartment or a dedicated slot on the keyboard.
- Ipplaggja r-riċevitur 2.4G f'port USB disponibbli fuq il-kompjuter tiegħek.
- Slide the mode switch on the keyboard to the '2.4G' position. The keyboard should connect automatically.
3.2.2. Konnessjoni Bluetooth 5.0
- Slide the mode switch on the keyboard to the 'BT' position.
- On your device (computer, tablet, phone), go to Bluetooth settings and enable Bluetooth.
- The keyboard can store up to 3 Bluetooth device pairings. To pair with a new device, press and hold Fn + 1, Fn + 2, or Fn + 3 until the indicator light flashes, indicating pairing mode.
- Select "LOFREE TOUCH" from the list of available Bluetooth devices on your device.
- Once paired, the indicator light will stop flashing. You can switch between paired devices by pressing Fn + 1, Fn + 2, or Fn + 3.
3.2.3. Wired (Type-C) Connection
- Connect one end of the provided Type-C cable to the keyboard's Type-C port.
- Qabbad it-tarf l-ieħor tal-kejbil ma 'port USB disponibbli fuq il-kompjuter tiegħek.
- The keyboard will automatically switch to wired mode. This mode also charges the batteries if they are rechargeable.
4. Kif Tħaddem it-Tastiera Tiegħek
4.1. Multi-System Compatibility
The LOFREE TOUCH keyboard is compatible with Windows, macOS/iOS, and Android operating systems. It features dedicated media keys for both Mac and Windows layouts.
Figure 4: Mac and Windows Layouts
4.1.1. Switching Layouts
To switch between Mac and Windows functional key layouts, press Fn + N (for Mac) or fn+m (for Windows).
4.2. Ċwievet tal-Funzjoni (Kombinazzjonijiet Fn)
The keyboard utilizes an Fn key for accessing secondary functions printed on the keycaps. Common functions include:
- Fn + F1-F12: Media controls (play/pause, volume, mute, etc.), screen brightness, search, task switch, etc. (functions may vary slightly between 68-key and 100-key models).
- Fn + 1/2/3: Aqleb bejn apparati Bluetooth imqabbdin.
- Fn + Q/W/E: (Specific to some models) Switch between 2.4G and Bluetooth modes or specific Bluetooth channels.
4.3. Qlib tal-Key N (NKRO)
The LOFREE TOUCH keyboard supports N-Key Rollover (NKRO), ensuring that every key press is registered, even when multiple keys are pressed simultaneously. This is beneficial for fast typists and gamers.
5. Manutenzjoni
5.1. Swiċċijiet li jistgħu jinbidlu bis-sħana
The keyboard features hot-swappable sockets, allowing you to change mechanical switches without soldering. It is compatible with standard 3-pin and 5-pin mechanical switches.
Figure 5: Hot-swappable switches with keycap and switch pullers
5.1.1. Changing Switches
- Using the provided keycap puller, gently remove the desired keycap.
- Using a switch puller (often included in the accessory box), carefully grip the switch and pull it straight up to remove it from the PCB.
- Align the pins of the new switch with the holes on the PCB and press it firmly until it clicks into place. Ensure the pins are not bent.
- Ibdel il-għatu taċ-ċwievet.
5.2. Keycaps
The keyboard comes with durable Dye-Sub PBT keycaps, which are resistant to shine and wear over time. You can customize your keyboard with various PBT keycap sets available from LOFREE.
5.3. Tindif
- Uża pinzell artab jew arja kkompressata biex tneħħi t-trab u l-fdalijiet minn bejn il-keycaps.
- For deeper cleaning, remove the keycaps using the keycap puller and clean them with a mild soap solution and a soft cloth. Ensure they are completely dry before reattaching.
- Wipe the keyboard surface with a damp, drapp mingħajr suf. Evita kimiċi ħarxa.
6. Speċifikazzjonijiet
6.1. Speċifikazzjonijiet Ġenerali
- Ditta: LOFREE
- Stil ta' Operazzjoni: Mekkaniċi
- Swiċċijiet: Gateron G Pro (Red), Linear, Pre-lubed
- Swiċċijiet Hot Swap: Yes (Standard 3-pin and 5-pin compatible)
- Materjal tal-keycap: Dye-Sub PBT
- Tip ta' Interface: USB (Tip-Ċ)
- Konnettività: Bluetooth 5.0, 2.4G Wireless, Tip-Ċ Fili
- Applikazzjoni: Desktop, Laptop, Tablet
- Lingwa: Ingliż
- Qawwa: 3 x Batterija AAA
- Ħajja tal-batterija: Approximately 30 days of typing
- Sistemi Operattivi: Windows, macOS/iOS, Android
- Rollover tal-N-Key (NKRO): Iva
- Ergonomija: 9° Curved Shape for reduced finger fatigue
6.2. 68-Key Model (OE902)
- Keyboard Standard: 68 ċwievet
- Dimensjonijiet: 310 x 109 x 51.5 mm
- Piż tat-Tastiera: 720g
6.3. 100-Key Model (OE903)
- Keyboard Standard: 100 ċwievet
- Dimensjonijiet: 367 x 129 x 54.5 mm
- Piż tat-Tastiera: 1010g
Figure 6: 68-key vs. 100-key models
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-tastiera ma tirrispondix | Low battery, incorrect connection mode, Bluetooth not paired, 2.4G receiver not plugged in. | Check/replace batteries. Ensure mode switch is set correctly (BT, 2.4G, or Wired). Re-pair Bluetooth or re-insert 2.4G receiver. Try wired connection. |
| Iċ-ċwievet mhux qed jirreġistraw | Swiċċ difettuż, debris taħt il-keycap. | Remove keycap and clean. If hot-swappable, try replacing the switch. |
| Konnessjoni Bluetooth instabbli | Interference, distance from device, low keyboard battery. | Move closer to the device. Ensure no other devices are causing interference. Check battery level. Re-pair the Bluetooth connection. |
| Keyboard not recognized by OS | Driver issue, OS compatibility. | Ensure OS is supported. Try a different USB port or cable. Restart computer. |
8. Għajnuniet għall-Utenti
- Personalize Your Keyboard: Ħu bil-quddiemtage of the hot-swappable switches and PBT keycaps to customize the feel and look of your keyboard. Experiment with different switch types for a unique typing experience.
- Immaksimalizza l-Konnettività: Utilize the triple-mode connectivity to seamlessly switch between your desktop, laptop, and tablet. Remember to pair your devices to different Bluetooth channels (Fn+1, Fn+2, Fn+3) for quick switching.
- Kumdità Ergonomika: The 9° curved shape is designed for comfort. Ensure proper wrist posture to further enhance your typing experience and reduce strain.
- Decorative Holder: Use the included holder plate to display your favorite figurines, extra keycaps, or LOFREE's IP mascot, LONELY, adding a personal touch to your workspace.
9. Garanzija u Appoġġ
Your LOFREE TOUCH Mechanical Keyboard comes with a manufacturer's warranty. Please refer to the included Warranty Card for details regarding warranty coverage, terms, and conditions. For technical support, product inquiries, or service requests, please visit the official LOFREE websit jew ikkuntattja lis-servizz tal-konsumatur tagħhom.
10. Vidjo ta' Dimostrazzjoni tal-Prodott
Video: Demonstration of the LOFREE TOUCH keyboard in use, showcasing typing and design elements.
