1. Istruzzjonijiet tas-Sigurtà
- Always keep the power off during installation.
- Check all terminal connections before wiring to ensure proper and secure contact.
- Connect the device strictly in accordance with the relevant wiring diagrams provided.
- Ensure that no bare wires are exposed from the terminals to prevent electric shock.
- Do not switch on the appliance before the installation is completely finished.
2. Installazzjoni
2.1 General Wiring Instructions
- Terminal L: Connect to the Live Wire.
- Terminal N: Connect to the Neutral Wire (if applicable, this model typically does not require a neutral wire for the switch function).
- L1, L2, L3 Terminals: Connect to the light wires.
- 2-Way Terminal: Connect to another 2-way terminal for multi-location control.
2.2 Passi ta' Installazzjoni
- Open the box and take out the parts. Distinguish the front and back of the metal plate (the side with CE and RoHS is the back side).
- Assemble the insert parts and the metal plate. Push the insert parts into the metal plate from the front side.
- Follow the wiring instructions to connect the wires.
- Screw to fix the switch to the wall box.
- Push the glass panel onto the device. Ensure the metal plate notch side matches the glass panel notch side for successful assembly.
Warning: Keep the power off until you finish the installation completely. Otherwise, the switch may fail.
2.3 Dijagrammi tal-Wiring
Refer to the diagrams below for correct wiring connections.
2.4 Capacitor/Adapter Installation for Dimmers
For stable light operation and to prevent flickering, especially with LED bulbs, connect the provided adapter (capacitor) to the light bulbs. The adapter should be connected to the Live Wire and Neutral Wire of the light bulbs.
2.5 Disassembly Precautions
To disassemble, separate the glass panel and metal plate from the groove using a screwdriver. Carefully lift the screwdriver to avoid scratching the glass panel or plastic border.
3. Operazzjoni
3.1 Dimmer Switch Default Operation
- Mixgħul/Mitfi: Click the touch button on the glass panel to turn the lights on or off.
- Brighten: Press and hold the touch button to brighten your light bulbs.
- Dimming: Release the button and long press again to dim the light bulbs.
3.2 Funzjoni tal-Memorja
The dimmer switch has a memory function that retains the last brightness level. When you turn the light off and then on again, it will recall the previously set adjustment intensity.
3.3 Compatible and Incompatible Bulbs
- Compatible Bulbs (Minimum 5W): Incandescent bulbs, Dimmable LED bulbs.
- Basal inkompatibbli: Fluorescent bulbs, Compact Fluorescent bulbs, Normal LED bulbs, Energy Saving bulbs.
4. Manutenzjoni
The Bseed touch switch features a tempered glass panel designed for durability and ease of maintenance:
- Prova kontra l-grif: The tempered glass resists scratches from daily use.
- Fire Proof: Provides enhanced safety against fire hazards.
- Faċli biex tnaddaf: The smooth glass surface can be easily wiped clean.
- Prova tal-Ilma: Offers protection against water splashes, making it suitable for various environments.
5 Issolvi l-problemi
- Teptip ħafif: If your lights flicker, ensure that a capacitor (adapter) is correctly installed on the light bulbs, connected to both the live and neutral wires of the bulbs. This is crucial for stable operation, especially with LED lights.
- Switch Not Responding After Installation: Always ensure the main power is cut off during installation. If you test the switch by touching it directly (without the cover panel), turn off the power for 5 minutes, then place the cover panel and turn the power back on.
- 2-Way Switch Incompatibility: Bseed 2-way light switches are designed to work only with other Bseed 2-way light switches. They are not compatible with 2-way switches from other brands or with mechanical switches.
- Dimmer Functionality Issues: Ensure that the connected light bulbs are explicitly labeled as 'dimmable'. Incompatible bulb types will not dim correctly or may cause damage.
6. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Kurrent Rated | 10A |
| Vol Operazzjonali Ratedtage | 110V ~ 240V AC |
| Capability Allowance | -15%~+10% |
| 1-Way Dimmer Load | 3-700W/Gang, 700W Total |
| 2-Way Dimmer Load | 3-200W/Gang, 200W Total |
| Temperatura tax-Xogħol | -20°C~+70°C |
| Frekwenza Operattiva | 50/60Hz |
| Umdità Relattiva | 10% -93% (mingħajr kondensazzjoni) |
| Konsum tal-Enerġija | ≤0.05W |
| Ċertifikazzjonijiet | CCC, FCC, ROHS, BS, GCC, FC |
| Ħin tal-Ħajja | 100,000 darba |
| Rekwiżit tal-Wajers | No Neutral Wire (for switch function) |
| Funzjonalità tal-Wi-Fi | No Wi-Fi function |
| Dawl ta' wara | ON-light Blue, OFF-Weak Blue |
| Module Shape | Round |
| Wall Box Type | Round & Square |
| Daqs | 86/157/228 * 86 * 35 mm (depending on gang configuration) |
7. Għajnuniet għall-Utenti
- This dimmer switch does not require a neutral wire for installation, simplifying the wiring process.
- The dimmer function is available for both 1-way and 2-way lighting setups.
- For 2-way dimmer functionality, you must use at least two Bseed 2-way dimmer switches, as they are designed to work together.
- To dim lights, long-press the touch button for 1-2 seconds. Release and long-press again to change the dimming direction.
- The blue backlight indicates successful wiring and helps locate the switch in the dark.
- When removing the glass panel, use a screwdriver carefully to avoid damage to the panel or plastic border.
8. Gwida bil-Vidjo
For a visual guide on installation and operation, please watch the official video:
9. Riżorsi Addizzjonali
For further detailed information and diagrams, you may refer to the comprehensive user manual in PDF format:
User manual (PDF): View Manwal PDF
