Manwal tal-Istruzzjonijiet tal-Partijiet ta' Sostituzzjoni tan-Nutribullet Blender

1. Introduzzjoni

This manual provides essential information for the proper use and maintenance of your Nutribullet blender replacement parts. These parts are designed to restore or enhance the functionality of your compatible Nutribullet 600W, 900W, and PRO series blenders.

2. Prodott Aktarview

This replacement kit includes high-quality components to ensure optimal blending performance and convenience.

• Extractor Blade: Features a 6-fin design made from high-strength stainless steel for efficient processing of fruits, vegetables, and other ingredients.
• Tazzi: Two large capacity cups (32 oz and 24 oz) made from BPA-free, food-grade plastic. They are dishwasher safe and feature a smooth surface for easy cleaning.
• għotjien: Includes a Flip Top To-Go Lid for convenient drinking and travel, and a Flat Cover for storage.
• Gaskits: Rubber gaskets are provided to ensure a complete, leak-free seal when the blade is attached to the cup.

Figure 1: Complete set of replacement parts.

Figure 2: Key features of the blade, covers, and gaskets.

Figure 3: Details of the 32oz and 24oz replacement cups.

Figure 4: Extractor blade details with 6 stainless steel fins.

3. Kompatibilità

These replacement parts are compatible with the following Nutribullet blender series:

• NutriBullet 600W Series: NB-101S 600W, NB-101B 600W MAX, NBR-1201 600W, NBR-0601 600W, NB-WL088-23, NB-WL007-02.
• NutriBullet 900W Series: NB-201 900W, NB9-1301 900W, NB9-1301S 900W, NB9-1501 900W, NB-BX281B-23, NB9-0507, NB9-1301RG, NB9-0901, NB-BX177F-02.
• NutriBullet PRO Exclusive.

Please ensure your blender model matches one of the listed compatible models before use.

4. Kontenut tal-Pakkett

Il-pakkett tiegħek għandu jkun fih l-oġġetti li ġejjin:

• 2 x Extractor Blades
• 2 x 32 oz Large Cups
• 2 x 24 oz Large Cups
• 4 x Gaskits tal-gomma
• 2 x Flip Top Covers
• 2 x Flat Covers

5. Konfigurazzjoni u Installazzjoni

Follow these steps to set up and install your replacement parts:

1. Ensure your Nutribullet blender is unplugged before handling any parts.
2. Select the desired cup size (32 oz or 24 oz) for your blending needs.
3. Place a rubber gasket securely into the rim of the extractor blade assembly. Ensure it is seated correctly to prevent leaks.
4. Fill the cup with your ingredients, ensuring not to exceed the 'MAX' fill line.
5. Screw the extractor blade assembly onto the open end of the cup until it is tightly sealed.
6. Place the assembled cup, blade-side down, onto your compatible Nutribullet blender base.

6. Istruzzjonijiet Operattivi

Once the replacement parts are installed, operate your blender as you normally would, following the instructions provided with your original Nutribullet blender.

• Ensure the cup and blade are securely attached to the blender base before turning it on.
• Blend ingredients to your desired consistency.
• After blending, remove the cup from the blender base.
• Unscrew the extractor blade from the cup.
• For on-the-go use, attach the Flip Top To-Go Lid to the cup. For storage, use the Flat Cover.

Figura 5: Eżample of blender in use with replacement cup.

7. Manutenzjoni u Tindif

Proper cleaning and maintenance will extend the life of your replacement parts:

• Tazzi: The 32 oz and 24 oz cups are dishwasher safe. You can also wash them by hand with warm, soapy water.
• Extractor Blade: Hand wash the extractor blade assembly immediately after use. Use caution as the blades are sharp. Do not immerse the entire blade assembly in water for extended periods.
• Gaskits: Periodically remove and clean the rubber gaskets to prevent residue buildup. Ensure they are dry before reinserting.
• Sostituzzjoni: It is recommended to replace the blade unit every 6 months, or sooner if you notice increased noise or leaking during operation.

8 Issolvi l-problemi

If you encounter issues with your replacement parts, consider the following:

• Blender is Leaking:
  • Ensure the rubber gasket is properly seated within the extractor blade assembly.
  • Verify that the extractor blade is screwed tightly onto the cup.
  • Check the gasket for any signs of wear or damage. Replace if necessary.
• Blender is Noisier Than Usual:
  • Increased noise can indicate wear on the blade assembly. Consider replacing the extractor blade unit.
• Partijiet Mhux Armar:
  • Double-check the compatibility list in Section 3 to ensure your Nutribullet model is supported.

9. Speċifikazzjonijiet

10. Għajnuniet għall-Utenti

Ma kien hemm l-ebda pariri speċifiċi għall-utent disponibbli minn reviewjew Q&A għal dan il-prodott fil-ħin tal-ħolqien tal-manwal.

11. Garanzija u Appoġġ

For any issues or support, please contact the seller directly. Please note the following conditions:

• Damaged items must be reported within 24 hours of receipt.
• Items in your possession for more than 7 days are considered used and may not be eligible for refund or replacement.
• If you are not satisfied with the item (e.g., incorrect, damaged, defective, or not as described), you may return it within 7 days for a replacement or refund.
• Return shipping costs for personal reasons (e.g., dislike, no longer needed) are the buyer's responsibility.
• All returned items must be in their original packaging. You must provide the shipping tracking number, specific reason for the return, and your order ID.