Introduzzjoni
The ThermoPro TP06B Digital Oven Baking Thermometer is designed to provide accurate temperature readings for your oven or the food being cooked within it. It is suitable for various indoor and outdoor cooking and baking applications, ensuring your food is cooked to perfection.
Vidjo: Fuqview of the ThermoPro TP06B Digital Meat Thermometer with Timer.
Image: The ThermoPro TP06B thermometer with its single probe.
Kontenut tal-Pakkett
- 1 x ThermoPro TP06B Thermometer Unit
- 1 x Sonda tal-Azzar Inossidabbli tal-Grad tal-Ikel
- 1 x Manwal ta 'Istruzzjoni
Note: 2 x AAA batteries are required and are not included in the package.
Image: Contents of the ThermoPro TP06B package.
Setup
- Daħħal Batteriji: Open the battery compartment on the back of the thermometer and insert 2 AAA batteries, ensuring correct polarity.
- Qabbad is-Sonda: Insert the stainless steel probe's jack into the socket on the side of the thermometer unit. Ensure it is firmly connected.
- Qawwa Mixgħul: Press the power button (usually combined with the °F/°C button) to turn on the device.
Image: The ThermoPro TP06B thermometer with its probe connected, ready for use.
Istruzzjonijiet Operattivi
Modalità Termometru
The TP06B features preset temperatures for various meat types and doneness levels, based on USDA guidelines. You can also set a custom target temperature.
- Select Meat Type: Agħfas il- LAĦAM button to cycle through preset meat types (e.g., Beef, Poultry, Lamb, Fish). Each selection will display a recommended target temperature.
- Select Doneness Level: After selecting a meat type, press the TOGĦMA button to choose your desired doneness level (e.g., Rare, Medium Rare, Medium, Medium Well, Well Done). The target temperature will adjust accordingly.
- Set Custom Temperature (PROG): If you prefer to set a specific temperature not covered by presets, select "PROG" using the LAĦAM button. Then, use the ▲ HR u ▼ MIN buttuni biex taġġusta t-temperatura fil-mira.
- Daħħal Sonda: Carefully insert the stainless steel probe into the thickest part of the food, avoiding bones.
- Monitor tat-Temperatura: The current internal temperature of your food will be displayed on the LCD. The thermometer will alert you when the target temperature is reached.
Image: Diagram illustrating the 9 preset meat modes and 5 doneness levels available on the TP06B.
Modalità Timer
The TP06B can function as a timer, offering both countdown and count-up capabilities up to 23 hours and 59 minutes. The timer and temperature can be displayed simultaneously.
- Switch to Timer Mode: Agħfas il- MODALITÀ button to switch between Thermometer and Timer modes.
- Set Countdown Timer: In Timer mode, use the ▲ HR u ▼ MIN buttons to set the desired hours and minutes. Press BIDU/WAQQF biex tibda l-countdown.
- Use Count-Up Timer: To use the count-up timer, ensure the timer is set to 00:00, then press BIDU/WAQQF.
- Ċar Timer: Agħfas il- ĊARA buttuna biex tirrisettja t-tajmer.
Image: The TP06B thermometer and timer displayed simultaneously, showing its versatility in a kitchen setting.
Smart Backlit LCD and Alerts
The TP06B features a smart backlit LCD that changes color to indicate temperature progression, along with an audible alarm.
- Dawl ta' wara blu: Flashes when the temperature increases by 15°F (approximately 8.3°C).
- Dawl ta' wara aħdar: Illuminates when the current temperature is within 15°F (approximately 8.3°C) of your set target temperature.
- Red Backlight & Alarm: Turns red and an audible alarm sounds when the food reaches the set target temperature.
Image: Visual representation of the TP06B's smart backlit LCD changing colors based on temperature progression.
Għażla tal-Unità tat-Temperatura
Biex taqleb bejn Celsius (°C) u Fahrenheit (°F), agħfas il-buttuna °F/°C button located at the bottom of the unit.
Manutenzjoni
- Tindif tas-Sonda: Always clean the stainless steel probe thoroughly with hot soapy water after each use. Do not immerse the thermometer unit in water.
- Tindif tal-Unità: Imsaħ l-unità tat-termometru b'reklamaramp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-unità fl-ilma.
- Sostituzzjoni tal-batterija: Replace batteries when the display becomes dim or the unit stops functioning. Ensure to dispose of old batteries responsibly.
- Ħażna: Store the thermometer and probe in a dry place at room temperature when not in use.
Issolvi l-problemi
- Ebda Wiri/Wiri Mdawwal: Check if the batteries are inserted correctly and have sufficient charge. Replace with new AAA batteries if necessary.
- Qari tat-Temperatura Mhux Preċiż: Ensure the probe is fully inserted into the thickest part of the food and not touching any bones. Verify the probe cable is securely connected to the thermometer unit.
- Probe Not Working: Check for any visible damage to the probe or cable. If damaged, the probe may need to be replaced.
- Allarm ma Ddoqq: Ensure the volume is not muted (if applicable) and that the target temperature has been set correctly.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Firxa tat-Temperatura | -9°C sa 250°C (16°F sa 482°F) |
| Batterija | 2 x batteriji AAA (mhux inklużi) |
| Preċiżjoni tat-Temperatura | ±1°C (±1.8°F) from 0°C to 100°C (32°F to 212°F) |
| Riżoluzzjoni | 1°C |
| Tul tas-Sonda | 6.5 pulzieri (azzar inossidabbli ta' grad ta' ikel) |
| Tul tal-Cable | 40 pulzier (kejbil tal-malja tal-istainless steel) |
| Daqs tal-Wiri LCD | 39 x 34 mm (1.5 x 1.3 pulzieri) |
| Dimensjonijiet | 124 H x 65 W x 38 D mm (4.88 H x 2.56 W x 1.50 D inches) |
| Piż | 142 g (0.31 lbs) |
| Ċertifikazzjonijiet | CE, RoHS, FDA approved probe |
| Reżistenza għas-Sħana tas-Sonda u l-Wajer | Sa 380°C (716°F) |
Image: Visual summary of the ThermoPro TP06B specifications.
Garanzija u Appoġġ
ThermoPro is committed to providing high-quality products and excellent customer service. As an official ThermoPro product, you can expect reliable performance.
Politika ta' Ritorn
- Every item is checked before shipment to prevent defects or incorrect items. Please inspect your goods upon receipt.
- In case of any damages, please claim compensation from the courier company immediately. We will assist you in this process.
- If you are not satisfied with your purchase, you may exchange the item. The buyer is responsible for all additional shipping fees incurred for exchanges.
- Please note: The warranty does not cover items damaged after use or as a result of water damage.
Appoġġ għall-Klijent
For further assistance, troubleshooting, or warranty claims, please contact ThermoPro customer support through the official ThermoPro website or your purchase platform. Providing your model number (TP06B) and purchase details will help expedite your request.
