Scimagic SMG-020A Multi-Frequency Rolling Code Compatible Remote Control User Manual

1. Introduzzjoni u Fuqview

The Scimagic SMG-020A is a multi-frequency rolling code compatible remote control designed to replace and consolidate up to four different remote controls for various garage doors, gates, and barriers. This aftermarket remote offers 100% perfect fit and functionality comparable to your original remote, provided your original remote's brand is listed in the compatibility table. It features a robust design with a metal and PVC construction, including a non-slip design and a dust-proof sliding cover for enhanced durability and comfort.

2. Speċifikazzjonijiet

3. Kontenut tal-Pakkett

• 1 x Scimagic SMG-020A Remote Control
• 1 x Key Chain
• 1 x Manwal Ingliż
• 1 x Batterija CR2032 (installata minn qabel jew separata)

4. Twaqqif u Programmazzjoni

The SMG-020A remote control offers a unique and straightforward programming method. It can be programmed without the need for the original remote, making it an ideal replacement even if your original is lost.

4.1. Programming Demonstration Video

4.2. Step-by-Step Programming Instructions

1. Enter Remote Brand Selection Mode: Press and hold button 1 and button 4 on the SMG-020A remote control simultaneously. Continue holding until the LED light flashes quickly. Release both buttons.
2. Select Your Original Remote's Code: Refer to the 'Compatible List' below to find your original remote's brand and its corresponding code. For example, if your original remote is DITEC with code 1-3-3-3, you would press button 1, then button 3, then button 3, then button 3 on the SMG-020A. After entering the code, the LED on the SMG-020A will flash quickly.
3. Store the Code to a Button: Immediately after the LED flashes quickly (indicating the code is entered), press the specific button on the SMG-020A (e.g., button 1) that you wish to assign this brand's code to.
4. Repeat for Multiple Brands (Optional): You can repeat steps 1-3 for other buttons (2, 3, and 4) to store codes for up to four different remote brands. For example, you could store DOORHAN's code to button 2.
5. Activate (Program) the New Remote with Your Receiver:
   • Iftaħ iċ-ċasing of your receiver, typically located near your garage door or gate motor.
   • On the receiver circuit board, locate and press the programming button (often labeled 'Prog' or 'Learn'). Hold it until the LED light (e.g., L1) on the receiver illuminates.
   • Press the button on your new SMG-020A remote control that you just programmed (e.g., button 1). Release it. The LED light on the receiver should blink and then turn off, indicating successful programming.
   • Wait approximately 10 seconds for the programming to finalize. Your new remote control is now programmed and ready for use.
6. Emitting Seed Code (Remark): After selecting the brand, press and hold button 1 and button 2 at the same time until the LED flashes, then press button 1 to emit the seed code.
7. Hidden Button Function: To activate a hidden button function (if applicable for your original remote), press and hold button 1 and button 2 on the SMG-020A simultaneously until the LED light turns on. Then, press the button you stored the code to (e.g., button 1) to send the hidden button signal.

4.3. Compatible List

Nota: Only compatible with the branded remote controls listed below. Please ensure your original remote control is in this list before attempting to program.

5. Istruzzjonijiet Operattivi

Once successfully programmed, operating the Scimagic SMG-020A remote control is simple:

1. Ensure you are within the effective emission distance of 10-50 meters from your receiver.
2. Press the corresponding button on the SMG-020A remote that you have programmed for your specific garage door, gate, or barrier.
3. The LED light on the remote will illuminate briefly to indicate a signal is being transmitted.

6. Manutenzjoni

6.1. Sostituzzjoni tal-batterija

The SMG-020A remote control uses a CR2032 coin cell battery. When the remote's range decreases or the LED light becomes dim, it's time to replace the battery. To replace:

1. Iftaħ bir-reqqa l-kontroll remot casing.
2. Neħħi l-batterija CR2032 l-antika.
3. Daħħal batterija CR2032 ġdida, filwaqt li tiżgura l-polarità korretta (+ in-naħa 'l fuq).
4. Agħlaq il-kontroll remot casing b'mod sigur.

6.2. Kura Ġenerali

• Keep the remote control dry and away from moisture.
• Avoid exposing the remote to extreme temperatures (hot or cold).
• The dust-proof sliding cover helps protect the buttons from dirt and accidental presses. Keep it clean.
• Do not drop or subject the remote to strong impacts.

7 Issolvi l-problemi

• Remote not responding after programming:
  • Double-check all programming steps, especially the brand code entry and the receiver activation.
  • Ensure your original remote's brand is indeed on the compatibility list.
  • Iċċekkja li l-batterija hija installata sew u għandha biżżejjed ċarġ.
• Poor operating range:
  • Ibdel il-batterija CR2032 b'waħda ġdida.
  • Kun żgur li m'hemm l-ebda ostaklu sinifikanti bejn ir-remote u r-riċevitur.
  • Avoid using the remote in areas with high radio frequency interference.
• LED on remote does not flash during programming:
  • Ensure buttons 1 and 4 are pressed simultaneously and held long enough until the LED flashes quickly.
  • Iċċekkja l-batterija.

8. Għajnuniet għall-Utenti

• Ivverifika l-Kompatibbiltà: Always check the compatibility list carefully to ensure your original remote's brand and frequency are supported by the SMG-020A before purchasing.
• Backup Remote: Since the SMG-020A can be programmed without the original remote, it's an excellent choice as a backup in case your primary remote is lost or damaged.
• Multiple Brands: Ħu bil-quddiemtage of the 4-button design to consolidate up to four different rolling code remotes into one convenient device.
• Ħajja tal-batterija: Keep a spare CR2032 battery on hand to ensure uninterrupted operation.

9. Garanzija u Appoġġ

For specific warranty information, technical assistance, or further support regarding your Scimagic SMG-020A remote control, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase for any warranty claims.