1. Prodott Aktarview
The ATORCH GR2PWS is a smart Din Rail energy meter designed for real-time monitoring of voltage, current, power, and energy consumption in home and industrial settings. It features a 1.50-inch TFT-LCD HD display and supports WiFi connectivity for remote control and data analysis via the Tuya or Smart Life mobile applications. This model (GR2PWS) includes a built-in latching relay for prompt alarm and power cut-off functionality.
Varjanti tal-Prodott:
- Basic version (GR2P): Only provides prompt alarms; does not cut off power.
- WiFi version (GR2PW): Provides prompt alarms; does not cut off power.
- WiFi + Relay Version (GR2PWS): Provides prompt alarms and can cut off power.
Attention: This product is designed for unidirectional current measurement and cannot be used in solar power generation systems as it does not handle negative current.
2. Setup u Installazzjoni
2.1 Disimballaġġ
Carefully unpack the energy meter and ensure all components are present:
- ATORCH GR2PWS Smart Din Rail Energy Meter (or GR2PW/GR2P variant)
- Manwal għall-Utent
2.2 Installazzjoni Fiżika
The meter is designed for installation on a standard 35mm DIN rail. It can be easily clipped onto the rail without the need for screws.
Image: The energy meter mounted on a 35mm DIN rail, showing its compact design.
2.3 Dijagramma tal-Wiring
Important: Strictly follow the schematic diagram for wiring. Ensure correct wiring to prevent damage to the device or electrical system. The measured voltage and current should not exceed the calibration range.
Image: A detailed wiring diagram showing the connection of the ATORCH GR2PWS meter between the entry line (L and N) and AC output, with an NXB-63 C20 circuit breaker and a light bulb as a load. Input terminals are labeled N INPUT and L INPUT, and output terminals are N OUTPUT and L OUTPUT.
Note on Initial Power-on (GR2PWS):
When the GR2PWS meter is first powered on, the built-in magnetic retention relay needs to be reset. This process takes more than ten seconds, during which the output will be maintained (delay protection). Over-limit protection functions (such as overvoltage, undervoltage, overcurrent, and overpower protection) will only take effect once startup is complete and the measurement interface is displayed. It is recommended to connect an air switch at the output end and wait for the meter to fully start before turning on your device's air switch.
2.4 App Download and WiFi Pairing
To utilize the smart features, download the 'Tuya' or 'Smart Life' app from Google Play (Android) or Apple App Store (iOS).
Image: A multi-panel image illustrating the Smart Life APP pairing operation steps. It shows opening the app, clicking 'Add Device', selecting the device, entering WiFi information, and confirming successful connection.
WiFi Connection Steps (for meters with WiFi modules):
- Download the 'Smart Life' or 'Tuya' App.
- After powering on, the device's red light flashes and remains on to enter distribution network mode, waiting for WiFi connection.
- Follow the in-app instructions to add the device. You will need to select your WiFi network (2.4GHz only) and enter the password.
- Once paired, the app will display the device interface.
Video: Demonstrates the initial power-on sequence, language selection (Chinese/English), self-check, WiFi connection interface, measurement function display, power protection settings, electricity price settings, and real-time voltage/current curve display. It also shows remote control via the mobile app.
3. Istruzzjonijiet Operattivi
3.1 Wiri Interface
The meter features a 1.50-inch TFT-LCD HD display panel (240x320 RGB Dot-matrix) that shows various electrical parameters in real-time. You can switch between Chinese and English interfaces.
Image: The meter's display showing real-time values for Voltage (Vol), Current (Cur), Power (Pwr), Energy (Ene), Bill, Frequency (Fre), Power Factor (Factor), Run Time, and CPU Temperature. It also indicates WiFi connection status.
3.2 Remote Monitoring and Control (via App)
The mobile app allows you to view electricity consumption data, daily/monthly/annual reports, and real-time electricity usage curves from anywhere with an internet connection. You can also remotely control the meter's functions.
Image: A smartphone displaying the ATORCH Smart Energy Meter app interface, showing voltage, current, power, total energy, bill, frequency, power factor, and CPU temperature. It also shows a graph of voltage maż-żmien.
3.3 Screen Flipping Function
The display screen can be rotated 360 degrees to accommodate different wiring orientations (up in/down out, left in/right out). To flip the screen, long-press the 'M' key (menu) to enter the background, then short-press the '+' key to rotate the screen.
Image: A diagram illustrating the screen flipping function, showing the meter's display orientation changing from 'down in and up out' to 'up in and down out', 'left in and right out', and 'right in and left out'.
3.4 Electricity Price Settings
The meter supports three electricity payment modes:
- Single rate electricity price: For basic calculation of electricity bills.
- Tiered electricity prices: Allows setting two types of electricity tariff coefficients (e.g., different rates for consumption above/below a certain kWh threshold).
- Peak and valley electricity prices: Enables setting different prices for specific time segments throughout the day (e.g., 00-07H, 07-11H, 11-19H, 19-00H).
Image: Three meters demonstrating different electricity price settings: single rate, tiered electricity prices, and peak/valley electricity prices.
3.5 Prepayment Function (GR2PWS only)
The GR2PWS model supports a prepayment function. When enabled, you can recharge the quantity of electricity (kWh). If the remaining energy is insufficient, the meter will automatically prompt you. When the remaining available power capacity reaches zero, the alarm will be disconnected, and power will be cut off.
Image: A smartphone screen showing the prepayment function interface in the app, with options for 'Prepayment switch', 'Power electricity not enough', 'Energy charge', 'Prepaid phone records', and 'Clear energy'. A balance of 1800.00 kWh is displayed.
4. Manutenzjoni
4.1 Titjib tal-Firmware
The meter supports lifetime free firmware updates via WiFi. To upgrade, open the mobile app, navigate to 'device upgrade' or 'update' in the device settings, and follow the prompts.
Image: A meter next to a smartphone showing the app's device upgrade interface, indicating a new firmware version is available for update.
4.2 Energy Data Zero Function
You can reset the accumulated energy data (KWH) in two ways:
- Method 1 (On Meter): Press and hold the 'M' key to enter the background, select 'Clear Accumulated Data', and then confirm to clear the data.
- Method 2 (Remotely via App): Use the 'Data Zero' function within the mobile app's settings.
Image: A meter next to a smartphone showing the app's setup interface with a 'Data Zero' button highlighted, indicating the remote reset function for energy data.
5 Issolvi l-problemi
Sistema ta' Allarm 5.1
The GR2PWS meter provides dual alarms and four prompts for safer electricity consumption, including:
- Fuq Voltage Tips
- Over Current Tips
- Over Power Tips
- Vol baxxtage Tips
Image: Four meters displaying different alarm prompts: Over Voltage Tips (320.5V > 320.0V), Over Current Tips (100.5A > 100.0A), Over Power Tips (32005W > 32000W), and Low Voltage Tips (265.5V < 265.0V).
5.2 Alarm Event Notification Settings
You can configure the mobile app to receive notifications for various alarm events. This allows for remote monitoring and immediate alerts for abnormal power consumption.
Image: A smartphone screen showing the initial steps to set up alarm event notifications in the app, starting from the home screen and navigating to 'Create Scene' via the '+' icon.
Image: A smartphone screen showing the 'Create Scene' interface, with 'When device status changes' highlighted as the trigger for an alarm notification.
Image: A smartphone screen showing the device selection for alarm events, with 'AT4PW-2' (likely the meter) highlighted.
Image: A smartphone screen showing the 'Select Function' interface, with 'Fault' highlighted as the type of event to monitor.
5.3 Memorja tat-Tifi
The meter retains accumulated energy data (KWH) in its memory even after a power-off. However, the switch mode settings do not have power-off memory. Upon power restoration, the relay will close, and the screen will display the connection status.
6. Speċifikazzjonijiet
6.1 Parametri Tekniċi
| Parametru | Basic Version (GR2P) | WiFi Version (GR2PW) | WiFi Switch Version (GR2PWS) |
|---|---|---|---|
| Voltage Firxa | AC50-320V | AC50-320V | AC50-320V |
| Medda Kurrenti | 0 ~ 100A | 0 ~ 100A | 0 ~ 100A |
| Firxa tal-Qawwa | 0 ~ 32000W | 0 ~ 32000W | 0 ~ 32000W |
| Medda tal-Enerġija | 0~999999KWH | 0~999999KWH | 0~999999KWH |
| Fattur ta' Enerġija | 0.00~1.00PF | 0.00~1.00PF | 0.00~1.00PF |
| Medda ta' Frekwenzi | 50-60Hz | 50-60Hz | 50-60Hz |
| Preċiżjoni tal-Kejl | Class 1.0 (active power meter) | Class 1.0 (active power meter) | Class 1.0 (active power meter) |
| Electricity Statistics | Xejn | Daily/Monthly/Yearly Report | Daily/Monthly/Yearly Report |
| Temperature /Calendar | Xejn | Need Connect Network | Need Connect Network |
| WiFi Networking APP | Mhux Appoġġjat | Appoġġ | Appoġġ |
| Kontroll tal-Vuċi | Mhux Appoġġjat | Mhux Appoġġjat | Appoġġ |
| Swiċċ tar-Relay Mibni | Xejn | Xejn | Built-in Relay |
| Memorja Power-Off | Appoġġ | Appoġġ | Appoġġ |
| Over-Voltage Protezzjoni | Only Prompt | Only Prompt | Aqta ' |
| Protezzjoni Over-Kurrent | Only Prompt | Only Prompt | Aqta ' |
| Protezzjoni ta 'Qawwa żejda | Only Prompt | Only Prompt | Aqta ' |
| Taħt il-Voltage Protezzjoni | Only Prompt | Only Prompt | Aqta ' |
| Swiċċ tat-tnixxija | Mhux Appoġġjat | Mhux Appoġġjat | Mhux Appoġġjat |
| Prepayment Function | Mhux Appoġġjat | Only Prompt | Appoġġ |
| Single-fee Electricity Model | Appoġġ | Appoġġ | Appoġġ |
| Step Tariff Model | Appoġġ | Appoġġ | Appoġġ |
| Peak/Valley Electricity Tariff Model | Mhux Appoġġjat | Appoġġ | Appoġġ |
| Automatic Delayed Recovery | Mhux Appoġġjat | Mhux Appoġġjat | Appoġġ |
Table: Technical parameters comparing the Basic (GR2P), WiFi (GR2PW), and WiFi Switch (GR2PWS) versions of the energy meter.
6.2 Dimensjonijiet
Length X Width X Height: 80mm X 36mm X 45mm
Image: A diagram showing the dimensions of the energy meter: 80mm height, 36mm width, and 45mm depth.
6.3 Ċertifikazzjonijiet
The ATORCH GR2PWS is CE and RoHS certified, ensuring compliance with relevant safety and environmental standards.
Image: Certificates of Conformity for CE and RoHS, issued by Shenzhen POCE Technology Co., Ltd., for the Electric Meter model AT4P-B/W/TH/P, AT2P, AT1P, S1WP, AT24.
7. Garanzija u Appoġġ
ATORCH is a legitimate brand committed to quality. Every product undergoes strict testing before shipment. We have absolute trust in our product quality.
Qabel ix-xiriasing, please carefully consider if our products meet your specific needs. If you have any questions regarding the receipt or use of the product, please contact us. We are dedicated to actively resolving your concerns.
To protect our reputation and ensure your satisfaction for future purchases, we kindly request that you do not initiate a return process unless absolutely necessary. Thank you for your understanding and cooperation.
