Manwal tal-Utent tad-Dash Cam REDTIGER F9

1. Introduzzjoni

The REDTIGER F9 Dash Cam is an advanced car camera system designed to provide comprehensive surveillance and recording for your vehicle. Featuring 4K front and 1080P rear recording, built-in WiFi and GPS, and intelligent parking monitoring, the F9 ensures you capture every moment on the road and while parked. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to help you get the most out of your device.

2. Kontenut tal-Pakkett

Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:

• 1 x REDTIGER F9 Dash Cam (Front Camera)
• 1 x Kamera ta' wara 1080P
• 1 x Suction Cup Mount with GPS Module
• 1 x USB-C Car Charger (11.5 ft cable)
• 1 x Rear Camera Cable (20 ft)
• 5 x Clips tal-Cable
• 1 x Stiker Elettrostatiku
• 1 x Car Wire Trim Tool
• 1 x 32GB Memory Card (pre-installed or included separately)
• 1 x Manwal għall-Utent

3. Speċifikazzjonijiet

4. Setup u Installazzjoni

Follow these steps for proper installation of your REDTIGER F9 Dash Cam:

4.1 Gwida għall-Installazzjoni Video

4.2 Installazzjoni tal-Kamera ta' Quddiem

1. Test tal-Bank: Before permanent installation, connect the dash cam to power and ensure all functions (recording, WiFi, GPS) are working correctly.
2. Agħżel Post: Choose a suitable location on your front windshield, typically behind the rearview mirror, where the dash cam will not obstruct your view.
3. Apply Electrostatic Sticker: Clean the selected area on the windshield thoroughly. Apply the electrostatic sticker to this area. This protects your windshield and allows for easier removal.
4. Prepare Mount: Tear off the red protective film from the 3M adhesive on the suction cup mount.
5. Waħħal id-Dash Cam: Fix the dash cam onto the electrostatic sticker at the selected position. Adjust the angle to ensure a clear view tat-triq 'il quddiem.

4.3 Wiring the Front Camera

1. Rotta tal-Kejbil tal-Enerġija: Reserve a small section of the USB-C power cable near the dash cam.
2. Hide Cable: Use the provided car wire trim tool (crowbar) to carefully tuck the remaining power cable into the gap between the front windshield and the roof lining.
3. Down A-Pillar: Continue hiding the cable down the A-pillar (the pillar next to the windshield on the passenger side).
4. To Foot Pad: Route the cable towards the front of the passenger seat foot pad.
5. Under Foot Pad: Hide the cable under the passenger foot pad for a clean installation.
6. Qabbad mal-Enerġija: Finally, route the cable to the cigarette lighter position and plug in the car charger.

4.4 Installazzjoni ta' Kamera ta' wara

1. Route Rear Cable: Similar to the front camera, hide the rear camera cable along the front windshield gap, then along the gap between the car body and the ceiling on the passenger side.
2. To Rear Windshield: Continue routing the cable between the rear seat and the ceiling, hiding it into the welt (trim).
3. Agħżel Post: Choose a suitable location on your rear windshield for the rear camera.
4. Apply Electrostatic Sticker: Clean the selected area and apply the electrostatic sticker.
5. Attach Rear Camera: Peel off the 3M adhesive from the rear camera and stick it onto the electrostatic sticker.

4.5 Hardwire Kit (HW KIT) Installation (Optional)

The optional HW KIT is an accessory that connects directly to your car's battery (via the fuse box) to convert 12V voltage to 5V, enabling the 24-hour parking monitoring function. If your F9 model includes the HW KIT, follow the specific instructions provided with the kit for installation. Professional installation is recommended if you are unsure about wiring directly to your vehicle's fuse box.

5. Istruzzjonijiet Operattivi

5.1 Operazzjoni Awtomatika

Once installed and connected to power, the REDTIGER F9 Dash Cam will automatically turn on and begin recording when you start your vehicle. It will automatically turn off when you turn off your vehicle's ignition.

5.2 Loop Recording

The dash cam supports loop recording, which means it continuously records video. When the memory card is full, it automatically overwrites the oldest recordings to make space for new ones. This ensures you always have the latest footage without manual formatting.

5.3 Monitoraġġ tal-Parkeġġ

The F9 offers two parking monitoring modes (requires optional HW KIT for 24-hour surveillance):

• G-Sensor Monitor: When a sudden collision or impact is detected while parked, the dash cam automatically starts recording and locks the footage biex tevita li jiġi miktub fuqu.



• Time-Lapse Monitor: This mode records at a very low frame rate (e.g., 1fps) while parked. This saves memory card capacity while ensuring no events are missed during extended parking periods.

5.4 WiFi u Kontroll tal-App

The F9 features built-in 5.8G WiFi, allowing you to connect your smartphone via the "Redtiger" app (available on Google Play and App Store). Through the app, you can:

• View vidjo dirett mid-dash cam.
• Daqq lura l-vidjows irreġistrati.
• Download recorded videos directly to your smartphone.
• Share videos on social media.

5.5 Smart Voice Broadcast

The dash cam provides voice broadcast notifications to keep you informed of its status without needing a screen. You will hear announcements such as "Recording On," "Recording Off," and "Formatting Completed." A red indicator light will also flash during recording and stay on when recording stops.

5.6 One-Click Operation & Detachable Bracket

The F9 allows for quick actions:

• One-Click Video Lock: In case of an accident or important event, press the designated button to lock the current video segment, preventing it from being overwritten by loop recording.
• Detachable Bracket: The dash cam can be easily separated from its bracket without needing to remove the 3M adhesive from the windshield, allowing you to take the camera with you for review or security.

6. Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tad-dash cam tiegħek:

• Ġestjoni tal-Karta SD: While loop recording manages space, it's recommended to periodically back up important footage and format the SD card every few months to maintain its health and prevent data corruption. Use a Class 10 or higher speed SD card for best performance.
• Super Capacitor: The F9 uses a super capacitor instead of a traditional battery. This provides enhanced durability, heat resistance (up to 70°C), cold resistance (down to -20°C), and is more environmentally friendly with no pollution. This component requires no special maintenance.



• Tindif: Regularly clean the dash cam lenses with a soft, lint-free cloth to ensure clear video quality. Avoid using harsh chemicals or abrasive materials. Keep the device free from dust and debris.
• Ċarġer tal-Karozza: The unique car charger includes an additional USB port, allowing you to power both your phone and the dash cam simultaneously. Ensure the charger is securely plugged into the cigarette lighter socket.

7 Issolvi l-problemi

If you encounter issues with your REDTIGER F9 Dash Cam, refer to the following common problems and solutions:

8. Għajnuniet għall-Utenti

• Kontroll ta' qabel l-Installazzjoni: Always perform a bench test of the dash cam before fully installing it in your vehicle to confirm all components are working correctly.
• Clean Wiring: Utilize the provided cable clips and trim tool to neatly hide all cables along the car's interior for a professional and safe installation.
• Parking Mode Power: For continuous 24-hour parking monitoring, ensure you have the "HW KIT" version of the F9 and that it is correctly installed to draw power from your car's battery.
• Konnettività tal-App: For seamless live viewing, daqq, u file transfer, ensure your smartphone's WiFi is connected directly to the dash cam's WiFi network via the "Redtiger" app.

9. Garanzija u Appoġġ

The REDTIGER F9 Dash Cam comes with an Garanzija bla ħlas ta' 18-il xahar mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura u malfunzjonamenti taħt użu normali.

For technical support, warranty claims, or any questions regarding your product, please contact REDTIGER Official Store customer service through the platform where you purchased the device. Please have your purchase details and product model number ready when contacting support.