Manwal tal-Utent tal-Enclosure tal-Hard Drive RAID Yottamaster PS500C3

Introduzzjoni

The Yottamaster PS500C3 is a high-performance RAID hard drive enclosure designed to provide reliable and flexible storage solutions for 2.5-inch and 3.5-inch SATA HDDs and SSDs. With support for up to 80TB total capacity (16TB per single disk) and USB 3.1 5Gbps Type-C connectivity, it offers fast data transfer and robust data protection through various RAID modes. This manual provides detailed instructions for setup, operation, and maintenance of your enclosure.

Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-kontenut tal-pakkett meta tiftaħ il-kaxxa biex tiżgura li l-komponenti kollha huma preżenti:

1. Product (Yottamaster PS500C3 Enclosure) x 1
2. Korda tal-enerġija x 1
3. Power adapter (EU/US/AU/UK Plug, depending on region) x 1
4. USB Type-A to USB Type-C Cable (100CM) x 1
5. Tornavit x 1
6. Spare screws x 1 set
7. Manwal tal-Istruzzjonijiet x 1
8. Kaxxa tal-ippakkjar x 1

Gwida ta' Setup

1. Hard Drive Installation (Tool-less Design)

The Yottamaster PS500C3 enclosure features a tool-less design for easy installation of 2.5-inch and 3.5-inch SATA HDDs/SSDs. For 2.5-inch drives, screws are provided for secure fastening.

1. Iftaħ l-Għeluq: Press the spring door on the front panel and remove the hard disk carrier(s).



2. Daħħal il-Hard Drive: Place your 2.5-inch or 3.5-inch SATA HDD/SSD into the bracket. For 2.5-inch hard disks, use the provided screws to fix them securely.
3. Reinsert Carrier: Put the bracket with the hard disk back into the hard disk cabinet and gently push it in until it clicks into place.



4. Mehmużin mill-Qrib: Close the enclosure door. The installation is now complete.

2. Connecting to Power and Host Device

Connect the enclosure to a power source and your computer using the provided cables.

1. Konnessjoni tal-Enerġija: Connect the power adapter to the DC IN port on the rear of the enclosure, then plug it into a wall outlet.
2. Konnessjoni tad-Data: Connect the USB Type-A to USB Type-C cable from the enclosure's USB 3.1 Type-C port to an available USB port on your computer (Windows, Mac, or Linux).



3. Qawwa Mixgħul: Press the power button on the rear of the enclosure to turn it on.

3. Setting RAID Mode

The Yottamaster PS500C3 supports multiple RAID modes. Important: Setting or changing the RAID mode will clear the contents of the hard disk. Please back up important data before using the old hard disk.

The RAID mode is configured using DIP switches located on the rear panel. Refer to the diagram below for specific switch settings for each RAID mode.

• RAID 0 (Fast Speed): Switches 1, 2, 3, 4: DOWN – DOWN – DOWN – UP
• RAID 1/10: Switches 1, 2, 3, 4: DOWN – UP – DOWN – UP
• RAID 3: Switches 1, 2, 3, 4: DOWN – UP – UP – UP
• RAID 5 (Comprehensive): Switches 1, 2, 3, 4: UP – DOWN – UP – UP
• Span (Big) / JBOD: Switches 1, 2, 3, 4: DOWN – UP – DOWN – UP
• Normal / Clear (PM Mode): Switches 1, 2, 3, 4: UP – UP – UP – UP

After setting the DIP switches, press the 'SET' button to apply the changes. Power cycle the device if necessary.

Istruzzjonijiet Operattivi

1. Power On/Off

To power on the enclosure, press the power button on the rear panel. The LED indicator on the front will illuminate. To power off, press and hold the power button until the device shuts down.

2. Trasferiment tad-Data

Once connected and powered on, your computer should recognize the enclosure as an external storage device. You can then drag and drop files to and from the enclosure. The USB 3.1 Gen 1 interface supports transfer speeds of up to 5Gbps, allowing for fast and efficient data movement.

3. RAID Mode Functionality

Understanding the different RAID modes is crucial for optimizing your storage. Here's a brief overview:

• RAID 0 (Fast Speed): Requires at least two disks. Combines disks into one logical unit, doubling the theoretical speed of a single disk. No data redundancy.
• RAID 1 (High Security): Requires two disks. Mirrors data across both disks, providing high data redundancy. Capacity is limited to the size of one disk.
• RAID 3 (Fast and Safe Reading): Requires at least 3 disks. Uses one disk for error correction data. If one disk is damaged, data can be recovered. Requires disks of the same capacity.
• RAID 5 (Comprehensive): Requires 3-5 disks. Combines RAID 0 (speed) and RAID 1 (security) features. Offers good read-write ability and security.
• RAID 10 (RAID 0 + RAID 1 Combination): Requires 4-5 disks. Combines the high speed of RAID 0 with the security of RAID 1.
• Klonu: Creates an exact copy of one disk onto another.
• JBOD (SPAN) (Large Capacity): Combines multiple disks into a single large logical volume. Data is written sequentially across disks. If one disk fails, all data on the JBOD volume may be lost.
• PM (Normal) Mode (Single Disk Reading): Each hard disk is read independently, similar to mobile hard disks. Other hard disks are not affected if one fails.

Always ensure you understand the implications of each RAID mode on data redundancy and performance before configuration.

4. Sleep Energy Saving

The enclosure is designed with a sleep energy-saving feature. If there is no read-write activity for 10 minutes, the device will automatically enter a sleep state. This prevents the hard disk from invalid reading and writing for prolonged periods, reduces noise, and conserves power.

Manutenzjoni

1. Sistema ta 'tkessiħ

The Yottamaster PS500C3 features an 80mm silent fan and a convective heat dissipation design to ensure optimal operating temperatures for your hard drives. This aluminum alloy body aids in effective heat dissipation.

To maintain efficient cooling, ensure the fan vents on the rear of the enclosure are not obstructed. Regularly clean any dust accumulation from the vents using compressed air.

2. Karatteristiċi tas-Sigurtà

The enclosure is equipped with multiple safeguards to protect your data and the device itself:

• Protezzjoni tal-kurrent żejjed: Prevents damage from excessive electrical current.
• Protezzjoni ta' sħana żejda: Monitors internal temperature and takes action to prevent overheating.
• Voltage Protezzjoni: Salvagwardji kontra l-voltagvarjazzjonijiet.
• Protezzjoni Short Circuit: Jipproteġi kontra xorts elettriċi.

Always use the provided power adapter to ensure proper voltage u provvista kurrenti.

Issolvi l-problemi

• Apparat mhux rikonoxxut:
  • Ensure all cables (power and USB) are securely connected.
  • Ipprova qabbad ma 'port USB differenti fuq il-kompjuter tiegħek.
  • Verify the enclosure is powered on (LED indicator should be lit).
  • Check if the hard drives are properly installed in their bays.
  • Għal drives ġodda, kun żgur li huma inizjalizzati u fformattjati fid-Disk Management (Windows) jew fid-Disk Utility (macOS) tas-sistema operattiva tiegħek.
• Veloċitajiet ta' trasferiment baxxi:
  • Ensure you are using a USB 3.0/3.1 compatible port and cable.
  • Iċċekkja s-saħħa tal-hard drives tiegħek.
  • Consider the RAID mode configuration; some modes prioritize redundancy over speed.
• RAID mode not applying:
  • Double-check the DIP switch settings against the manual's diagram.
  • Ensure you press the 'SET' button after changing DIP switches.
  • Power cycle the enclosure after applying new RAID settings.
  • Remember that changing RAID modes will erase data; ensure you have backups.
• Enclosure overheating:
  • Ensure the rear fan vents are clear of obstructions.
  • Ħaddem l-għeluq f'żona ventilata tajjeb.
  • Clean dust from the fan and vents regularly.

Speċifikazzjonijiet

The Yottamaster PS500C3 is part of the Y-Pioneer Series. Below are the detailed specifications:

Garanzija u Appoġġ

Yottamaster products are designed for reliability and performance. For warranty information and technical support, please refer to the official Yottamaster webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.

Għajnuniet għall-Utent

• Empty Enclosure: This product is a hard drive enclosure only. It does not come with hard drives. You will need to purchase 2.5-inch or 3.5-inch SATA HDDs/SSDs separately to use with this device.
• Backup tad-Data: Always back up important data before changing RAID modes, as this process will erase all data on the installed hard drives.
• Kompatibilità tas-sewqan: Ensure your hard drives are SATA compatible. The enclosure supports both 2.5-inch and 3.5-inch drives.