XINOWY V6 Plus Motorcycle Helmet Bluetooth Headset Intercom

1. Introduzzjoni

The XINOWY V6 Plus is a high-performance, stable Bluetooth intercom system designed for motorcycle helmets. It offers clear communication, music playback, and GPS navigation audio, enhancing safety and convenience during rides. The device features a robust, screw-less ultrasonic structure, ensuring it is waterproof and provides HD-Voice quality. It supports communication with up to 6 riders, with 2 riders able to engage in full-duplex intercom simultaneously.

Figure 1: XINOWY V6 Plus Intercom highlighting key features.

Nota: There are two types of panel designs for the V6 Plus, which are shipped randomly. Both versions are original and offer identical functionality.

Figure 2: Randomly shipped panel designs.

2. Kontenut tal-Pakkett

Il-pakkett jinkludi l-oġġetti li ġejjin:

Figure 3: Contents of the XINOWY V6 Plus package.

• 1 or 2 x Helmet Intercom Unit (depending on single/double pack)
• 1 or 2 x Microphone (2-in-1) & Headset
• 1 or 2 x USB Charging Cable
• 1 or 2 x Clip + Double-sided Adhesive Base
• 1 or 2 x Screwdriver
• 1 or 2 x User Manual (this document, also available as PDF: Manwal tal-Utent PDF)

3. Prodott Aktarview

Familiarize yourself with the intercom unit's buttons and interfaces.

Figure 4: XINOWY V6 Plus Intercom Unit Diagram.

1. MOTOR/A Button: Power On / Pairing with 'A' device
2. Buttuna B: Pairing with 'B' device
3. Buttuna C: Pairing with 'C' device
4. Buttuna D: Pairing with 'D' device
5. Buttuna E: Pairing with 'E' device
6. Buttuna tat-Telefon: Call/Play/Pause music
7. Volum + Buttuna: Increase volume / Next music
8. Volum - Buttuna: Decrease volume / Previous music
9. Power Off Button: Power off
10. Antenna: Għat-trasmissjoni tas-sinjali
11. Earphone Interface / USB Charger Interface: Type-C port for charging and connecting headset.

4. Setup u Installazzjoni

Follow these steps to properly install your intercom unit on your helmet:

Figure 5: Helmet Installation Diagram.

1. Waħħal il-Klip: Loosen the screws on the clip and install it securely onto the edge of your helmet.
2. Mount the Intercom: Slide the intercom unit onto the installed clip until it clicks into place.
3. Install Microphone and Speakers: Use the provided Velcro pads to attach the speakers inside the helmet's ear pockets. Choose between the hard mic (boom mic) or soft mic (wired mic) based on your helmet type (full-face vs. open-face) and attach it using Velcro.
4. Ġestjoni tal-Kejbil: Organize any messy cables and tuck them neatly into the helmet foam for comfort and to prevent interference.

The V6 Plus comes with added 3M adhesive accessories and a replacement interface for soft and hard labels, making it convenient to match with various helmets. Optimized snaps ensure easy attachment and removal.

Figure 6: Waterproofing and mounting features.

5. Operazzjoni

5.1 Phone Functions

1. Power On/Off:
   - Qawwa Mixgħul: Long press the MOTOR button for approximately 2 seconds until the main device light flashes, then release.
   - Itfi: Press the Power Off button.
2. Connect with Phone (GPS/MP3):
   - Long press the Phone button for 5 seconds until the red and blue lights flash alternately.
   - On your phone, enable Bluetooth and search for "V6".
   - Select "V6" to connect. Upon successful pairing, the intercom's blue light will flash. (This process also applies to GPS/MP3 devices that support Bluetooth.)
3. L-aħħar Numru mill-ġdid:
   - After connecting to your phone, long press the Phone button for 3 seconds. The device will automatically dial the last outgoing call number.
4. Jirċievu Sejħa:
   - When a call comes in, if no operation is performed within 5 seconds, the phone will automatically answer.
5. Irrifjuta Sejħa:
   - When a call comes in, press the Phone button to end the call.
6. Play/Suspend Music:
   - Short press the Phone button to play or pause music (compatible with 95% of cellphone music players).
7. Kontroll tal-Volum:
   - Żid il-Volum: Agħfas il-buttuna Volume +.
   - Naqqas il-Volum: Agħfas il-buttuna tal-Volum -.
8. Choose Music:
   - Mużika ta' Preċedenti: Long press the Volume - button for 2 seconds.
   - Mużika li jmiss: Long press the Volume + button for 2 seconds.
9. Iċċarġjar Tip:
   - While charging, the red light will be continuously on. Once fully charged, the red light will turn off.
10. Clear Pairing (Restore Factory Settings):
    - Press the Phone button and the B button simultaneously. The indicator light will flash red three times and then blue once. This clears all previous pairings.

5.2 Intercom Functions

The V6 Plus supports up to 6 riders for connection, with 2 riders able to talk in full duplex at the same time. The main device can be paired with up to 5 sub-devices. The main device can then select one sub-device (A, B, C, D, or E) to communicate with.

Figure 7: Multi-User Intercom System.

Figure 8: Normal and Private Intercom Modes.

1. Pairing with a Sub-Device (e.g., Device A):
   - Long press the MOTOR button on the main device and the MOTOR button on Device A simultaneously for about 5 seconds. Both devices' red and blue lights will flash.
   - Once they find each other, one device will automatically initiate a pairing connection, and the blue light will flash quickly.
   - After a short while, the blue lights on both devices will flash slowly simultaneously, indicating successful pairing and normal communication.
   - To pair the next sub-device, first press the MOTOR button on the main device to disconnect from the current sub-device.
2. Pairing with Other Sub-Devices (B, C, D, E):
   - The pairing process for devices B, C, D, and E is similar to Device A. Instead of the MOTOR button, you will use the corresponding B, C, D, or E button on both the main device and the sub-device you wish to pair.
   - Eżample, to pair with Device B, long press the B button on the main device and the B button on Device B simultaneously for about 5 seconds.

Importanti: The main device cannot communicate with all 5 sub-devices simultaneously. It can only select one sub-device at a time for communication. Use the MOTOR/B/C/D/E buttons on the main device to switch between paired sub-devices. The other five sub-devices cannot communicate directly with each other.

Nota: Once paired, you do not need to re-pair the devices for subsequent use. Simply press the corresponding MOTOR/B/C/D/E button on the main device to connect and talk.

The V6 Plus is designed to be compatible with most other brands of Bluetooth intercom headsets on the market, allowing for flexible group communication.

Figure 9: Compatibility with other intercom brands.

6. Speċifikazzjonijiet

7. Għajnuniet għall-Utenti

• Kwantità: The product is available as a single or double pack. Please verify your order to confirm if you purchased one or two intercom units.
• Tip ta' Mikrofonu: The package includes both hard (boom) and soft (wired) microphones. Choose the appropriate microphone for your helmet type (e.g., hard mic for open-face/modular, soft mic for full-face).
• Intercom & Music: While the device supports both music playback and intercom, simultaneous full-duplex intercom with background music may not be supported. Music typically pauses when an intercom conversation begins.
• Navigazzjoni GPS: The V6 Plus supports GPS navigation calls, providing clear audio directions.


Figure 10: GPS Navigation Call feature.

• Prestazzjoni ta' Veloċità Għolja: With advanced noise reduction technology, the V6 Plus is designed to provide clear communication even at higher speeds.


Figure 11: Noise Reduction Performance.

8 Issolvi l-problemi

8.1 Kwistjonijiet Komuni u Soluzzjonijiet

• Nuqqas ta' Tqabbil:
  - Ensure both devices are in pairing mode (red and blue lights flashing alternately).
  - Clear previous pairings by pressing the Phone button and B button simultaneously until the indicator flashes red three times and blue once.
  - If using an older version of the machine as the main unit, it may not successfully pair with a newer version. The newer version must be used as the main machine for successful pairing with an older version.
• Ebda Ħsejjes jew Kwalità Awdjo Fqira:
  - Check if the headset jack is fully inserted into the Type-C port.
  - Ensure speakers are correctly positioned inside the helmet, close to your ears.
  - Verify volume levels on both the intercom and your connected phone/GPS.
  - If the microphone or headphones stop working, contact customer support for potential replacement parts.
• Intercom Disconnection:
  - Ensure you are within the effective intercom range (up to 1200M, typically 300-800M outdoors).
  - Obstacles like buildings or dense terrain can reduce range. Use in open areas for optimal performance.
  - If the connection drops, try re-establishing by pressing the corresponding pairing button (MOTOR/B/C/D/E) on the main unit.
• Cannot Connect to Other Brands:
  - While the V6 Plus supports universal pairing, compatibility can vary. Ensure the other brand's intercom is in its universal pairing mode.

9. Prekawzjonijiet tas-Sigurtà

1. Waterproofing: Ensure the headphone jack is fully inserted into the device, especially in rainy conditions, to prevent water ingress.
2. Iċċarġjar: Always use the standard DC5V/1A charger to ensure battery longevity and safety.
3. Sigurtà tal-irkib: For your safety, it is not recommended to listen to music while riding, as it may distract you from your surroundings.
4. Operazzjoni manwali: Avoid manually operating the device buttons while riding. Focus on the road and your surroundings.
5. Distanza ta' Komunikazzjoni: For optimal communication range, it is recommended to use the intercom in open areas with minimal obstructions.

10. Informazzjoni Regolatorja

Dan l-apparat fih trasmettitur(i)/riċevitur(i) eżent(i) mil-liċenzja li jikkonformaw mal-RSS(s) eżent(i) mil-liċenzja tal-Innovation, Science and Economic Development Canada. It-tħaddim huwa soġġett għaż-żewġ kundizzjonijiet li ġejjin:

1. Dan l-apparat ma jistax jikkawża interferenza.
2. Dan l-apparat għandu jaċċetta kwalunkwe interferenza, inkluża interferenza li tista' tikkawża tħaddim mhux mixtieq tal-apparat.

11. Garanzija u Appoġġ

For any product inquiries, technical support, or warranty claims, please refer to the seller's contact information or the platform where the product was purchased. Keep your proof of purchase for warranty purposes.