1. Introduzzjoni
Thank you for choosing the LoraTap Smart Curtain/Blinds Switch. This device allows you to control your electrical roller shutters, blinds, or curtains through multiple methods: direct touch, a dedicated RF remote control, a smartphone application (Tuya Smart or Smart Life), and voice commands via smart assistants like Amazon Alexa and Google Home. This manual provides detailed instructions for installation, setup, operation, and troubleshooting to ensure optimal performance and safety.
2. Informazzjoni Importanti dwar is-Sigurtà
WARNING: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected at the circuit breaker before beginning any wiring.
- This device is designed for use with 4-wire AC motors (Blue Wire, Brown Wire, Black Wire, Green/Yellow Wire). It is NOT compatible with DC motors.
- Input Voltage: 100-250 VAC, 50/60Hz. Output Voltage (Motor Voltage): 100-250 VAC, 50/60Hz.
- Max Load: Below 600W.
- Tesponix l-apparat għal umdità jew temperaturi estremi.
- Kun żgur li l-konnessjonijiet tal-wajers kollha huma siguri u iżolati kif suppost.
3. Kontenut tal-Pakkett
Jekk jogħġbok immarka l-kaxxa għall-oġġetti li ġejjin:
- 1 x LoraTap 503 Smart Curtain Switch (White)
- 1 x 3-button RF Remote Control
- 1 x Wall Bracket for Remote
- 1 x User Guide (English or Italian)
- 1 x Terminal connector (for neutral lines)
- 1 x Blue wire (for installation)
- 2 x Viti tal-Immuntar
4. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tad-Ditta | Lora Tektek |
| Numru tal-Mudell | SC414WSC-US-V3-WHI |
| Materjal | Plastic (Fireproof ABS) with Glass Touch Panel |
| Tip ta' Swiċċ | Touch On/Off Switch |
| Input Voltage | 100-250 VAC, 50/60Hz |
| Ħruġ Voltage | 100-250 VAC, 50/60Hz |
| Max Power | 600W |
| Protokoll bla fili | 2.4GHz Wi-Fi (802.11 b/g/n, not support 5GHz Wi-Fi), LoraTap Private RF 868Mhz |
| Isem tal-App | Tuya, Smart Life (Free App, Support Android and iOS) |
| Appoġġ għall-Kontroll tal-Vuċi | Google Home, Amazon Alexa |
| Swiċċ Dimensjonijiet | 120mm x 72mm x 39mm |
| Tip ta' Batterija (Remote) | Coin Battery CR2032 |
| Ċertifikazzjoni | RoHS, CE, RED, EMC |
| Garanzija | 1 sena |
5. Installazzjoni
Before installation, ensure the main power supply is turned off at the circuit breaker to prevent electrical shock.
5.1 Dijagramma tal-Wiring
The LoraTap Smart Curtain Switch requires a Neutral Wire, L1, L2, and Earth Wire connections. Refer to the diagram below for proper wiring.
5.2 Installazzjoni Fiżika
The switch is designed to fit standard US and Italian junction boxes. Ensure your existing junction box is compatible with the dimensions shown below.
- Turn off the main power supply at your circuit breaker.
- Remove your old switch (if any).
- Connect the wires to the LoraTap Smart Curtain Switch according to the wiring diagram (Figure 3).
- Mount the switch into the wall box using the provided screws.
- Attach the glass touch panel.
- Irrestawra l-enerġija fis-circuit breaker.
6. Setup
6.1 App Download and Wi-Fi Pairing
- Download the 'Smart Life' or 'Tuya Smart' app from your smartphone's app store (available for iOS and Android).
- Irreġistra jew idħol fil-kont tiegħek.
- Fl-app, agħfas '+' biex iżżid apparat ġdid.
- Follow the in-app instructions to connect the switch to your 2.4GHz Wi-Fi network. (Note: 5GHz Wi-Fi is not supported).
- During the Wi-Fi connection process, the LED on the 'Open' button will be on, indicating it's ready for connection. It will turn off once successfully added to the app.
6.2 Tqabbil mill-Bogħod RF
The included RF remote control is pre-paired with the switch. If you need to re-pair or pair additional remotes:
- Ensure the switch is powered on.
- Refer to the detailed instructions in the provided user guide for specific pairing steps.
- The RF remote has a control range of up to 30 meters.
7. Operazzjoni
7.1 Kontroll tat-Tmiss
The glass touch panel features three buttons: Open, Pause, and Close. Simply touch the corresponding button to operate your curtains or blinds.
7.2 App Control
Using the Smart Life or Tuya Smart app, you can control your curtains from anywhere with an internet connection (2G, 3G, 4G, or Wi-Fi).
Kontroll mill-Bogħod 7.3 RF
The 3-button RF remote allows for convenient control of your curtains without needing your phone or voice commands. It can control multiple switches (up to 10) for group control.
7.4 Kontroll tal-Vuċi
Integrate your LoraTap Smart Curtain Switch with Amazon Alexa or Google Home for hands-free operation.
8. Karatteristiċi Avvanzati
8.1 Running Time Setting
You can set the switch operation time range from 10 to 120 seconds within the app. This feature is useful for adjusting the full open/close duration based on your shutter's height, eliminating the need for multiple presses.
8.2 Timing Function (Schedules)
Program your smart curtain switch to open or close at specific times using the app's scheduling feature. For example, set your curtains to open at 7:00 AM and close at 7:00 PM daily.
8.3 Group Function and Device Sharing
Create groups within the app to manage multiple curtain switches simultaneously. You can also share control of your devices with family members, allowing everyone in the household to operate the smart curtains.
8.4 No LED Always On
The switch panel is designed without an always-on LED light to avoid disturbing your sleep. The LED on the 'Open' button only illuminates during the initial Wi-Fi connection setup and turns off once connected.
9. Għajnuniet għall-Utenti
- Wi-Fi Connection Indicator: If you are having trouble connecting to Wi-Fi, note that the LED on the 'Open' button will be on to indicate it's in pairing mode. It will turn off once successfully connected to the app.
- Kompatibilità tal-Mutur: Always double-check that your motor is a 4-wire AC motor before purchasing jew installazzjoni biex tiżgura l-kompatibbiltà.
- RF Remote Flexibility: You can purchase additional single, 2-channel, or 4-channel RF remotes and pair them flexibly with your RF & WiFi Roller Shutter Switch for expanded control options.
10 Issolvi l-problemi
- Is-swiċċ mhux qed jirrispondi: Check if the main power supply is on. Ensure all wiring connections are secure.
- Problemi bil-konnessjoni tal-app: Verify your Wi-Fi network is 2.4GHz. Restart your router and the switch, then try pairing again. Ensure your phone is close to the switch during pairing.
- RF remote not working: Check the CR2032 coin battery in the remote. Re-pair the remote with the switch if necessary (refer to the detailed user guide).
- Curtain motor not moving: Confirm your motor is a 4-wire AC motor. Check the motor's power supply and connections to the switch.
11. Garanzija u Appoġġ
The LoraTap Smart Curtain/Blinds Switch comes with a 1-year warranty from the date of purchase. For technical support, compatibility questions, or any other inquiries, please contact LoraTap Official Store customer service. We are an ISO9001 certified manufacturer, ensuring high-quality products and support.
Video 1: Demonstration of the LoraTap Smart Curtain Switch being controlled via touch, smartphone app, and RF remote.
