Introduzzjoni
Thank you for choosing the Retevis RB689 UHF Bluetooth Two Way Radio. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.
Figure 1: Retevis RB689 Key Features Overview
Video 1: Retevis RB689 Product Features Demonstration
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja l-pakkett bir-reqqa biex tiżgura li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba:
- 1 x RB689 Two Way Radio
- 1 x Battery (2600mAh Li-ion)
- 1 x Detachable Antenna (SMA-K type, Host connector: SMA-J)
- 1 x Ċarġer tal-Desktop
- 1 x Type-C Charging Cable for Bluetooth Headset
- 1 x Bluetooth Headset (Model: EWN001)
- 1 x Clip taċ-ċinturin
- 1 x Ċinga tal-Idejn
- 1 x Manwal tal-Utent
Figura 2: Kontenut tal-Pakkett Sħiħ
Prodott Overview
RB689 Two Way Radju
Figure 3: RB689 Radio Parts Diagram
- Antenna: Għat-trażmissjoni u r-riċeviment ta' sinjali.
- Volume/Power Switch: Dawwar biex tixgħel/titfi r-radju u taġġusta l-volum.
- Flashlight: Jipprovdi dawl.
- Indikatur: Juri l-istatus tar-radju (eż., qed jittrażmetti, qed jirċievi, qed jiċċarġja).
- Kelliem: Għall-output tal-awdjo.
- MIC: Mikrofonu għal input tal-vuċi.
- Buttuna PTT: Push-To-Talk button for transmission.
- PF1/Channel Up: Programmable function key, also for channel up.
- PF2/Channel Down: Programmable function key, also for channel down.
- Remote Headset/Programming Cable Connector: For accessories and programming.
Bluetooth Headset (Model: EWN001)
Figure 4: Bluetooth Headset Parts Diagram
- Mess PTT: Touch-sensitive Push-To-Talk area.
- Indikatur: Shows headset status (e.g., pairing, connected, charging).
- Buttuna PTT: Push-To-Talk button.
- Volum +: Żid il-volum.
- Volum -: Naqqas il-volum.
- Power On/Off: Button to turn the headset on or off.
- Iċċarġjar tat-Tip C: Port tal-iċċarġjar.
- MIC: Mikrofonu għal input tal-vuċi.
Setup
1. Installa l-antenna
Screw the detachable antenna clockwise onto the antenna connector at the top of the radio until it is firmly seated. Ensure a secure connection for optimal performance.
Figure 5: Attaching the Detachable Antenna
2. Installa l-batterija
Align the battery with the grooves on the back of the radio and slide it upwards until it clicks into place. To remove, slide the battery release latch and pull the battery downwards.
3. Iċċarġja l-Batterija
Before initial use, fully charge the radio's battery. Place the radio (with battery installed) into the desktop charger. Connect the desktop charger to a power source using a USB wall adapter, power bank, or PC. The indicator light on the charger will show charging status.
Figure 6: Multi-charging Methods
Charge the Bluetooth headset using the provided Type-C charging cable.
4. Frequency Programming
The RB689 operates on UHF frequencies (400-470MHz). For specific channel configurations and power settings, programming software is required. The default frequency range is 450-470MHz for legal compliance. If frequency expansion (400-470MHz) is needed, you must unlock the software:
- Download the frequency writing software: Frequency Software Link 1
- Iftaħ is-softwer.
- Agħfas u żomm il- CTRL key on your keyboard, then press 8. A password box will appear.
- Daħħal 11882 as the password. (Note: If using a desktop computer, ensure you enter the letters above the number 8 if applicable).
- If you encounter issues with the fifth decimal place of the frequency automatically changing, use this alternative software link: Frequency Software Link 2
Istruzzjonijiet Operattivi
1. Ixgħel/Itfi u Aġġustament tal-Volum
Dawwar il- Swiċċ tal-Volum/Qawwa (2) clockwise to turn the radio on. Continue rotating to increase the volume. Rotate counter-clockwise to decrease volume and turn the radio off.
2. Għażla tal-Kanal
Uża l- PF1/Channel Up (8) u PF2/Channel Down (9) buttons to select your desired communication channel. The current channel will be displayed on the LED screen.
Figura 7: Wiri Diġitali LED
3. Adjusting Power Output (High Power Mode)
The RB689 supports 5W (default) and 10W power output. To switch to high power mode (10W), press the Buttuna PTT (7) u PF1 button (8) simultaneously. You will hear two beeps indicating the power has been switched to high power. High power provides a wider communication range (up to 4km compared to 2.6km for 5W).
Figure 8: High Power Output Comparison
4. L-użu tal-flashlight
The powerful flashlight (3) provides illumination. To activate the flashlight, the side key needs to be programmed as the 'lamp' function in advance using the programming software.
Figure 9: Powerful Flashlight Feature
5. Tqabbil tal-Bluetooth
The RB689 radio can be paired with the included Bluetooth headset for hands-free operation. The headset can also be paired with a mobile phone.
Pairing Radio with Bluetooth Headset:
- Ensure both the radio and headset are powered on.
- Put the Bluetooth headset into pairing mode (refer to headset manual for specific steps, usually involves holding the power button).
- On the RB689 radio, activate Bluetooth pairing mode (this may require programming a function key or accessing a menu via software).
- Once paired, the indicator lights on both devices will confirm connection.
Nota: After canceling a pairing, the walkie talkie must exit and re-enter pairing mode, or it cannot be paired with the Bluetooth headset again.
Figure 10: Bluetooth Compatibility and Pairing
6. Wireless Copy Function
The wireless copy function allows you to quickly duplicate frequency settings from one RB689 radio to others, improving efficiency. To use this feature, the wireless ID and wireless frequency must be set identically on all radios via programming software.
Figure 11: Wireless Copy Feature
7. Local/Remote Alarm Function
The RB689 features an alarm function for emergencies. To activate this, the Local/Remote alarm option needs to be selected, and either the PF1 or PF2 button must be programmed as the 'alarm' function in advance using the programming software.
Figure 12: Local/Remote Alarm
Manutenzjoni
Kura tal-batterija:
- M'għandekx short-circuit it-terminali tal-batterija.
- Tesponix il-batterija għan-nar jew sħana estrema.
- Żarmax il-pakkett tal-batterija.
- Charge the battery fully before first use and when the low battery indicator appears.
- If the radio is not used for an extended period, remove the battery.
Tindif:
- Clean the radio and accessories with a soft, damp drapp.
- Tużax kimiċi ħarxa jew tindif li joborxu.
- Kun żgur li r-radju jkun niexef qabel l-użu jew il-ċarġjar.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ir-radju ma jixgħelx | Il-batterija hija baxxa jew mhux installata sew. | Charge the battery. Reinstall the battery ensuring it clicks into place. |
| Ma nistax nikkomunika ma' radjijiet oħra | Different frequencies/channels. Out of range. Low battery. | Ensure all radios are on the same frequency/channel. Move closer to other radios. Charge battery. |
| Kwalità fqira tal-awdjo | Weak signal. Antenna loose. Volume too low/high. | Move to an area with better signal. Tighten antenna. Adjust volume. |
| Bluetooth headset not pairing | Headset not in pairing mode. Radio not in pairing mode. Previously paired device interfering. | Ensure both devices are in pairing mode. If previously paired, reset pairing on both devices and try again. |
| Il-flashlight ma taħdimx | Side key not programmed for 'lamp' function. | Use programming software to assign the 'lamp' function to a side key. |
Speċifikazzjonijiet
RB689 Two Way Radju
Figure 13: RB689 Radio Specifications
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | RB689 |
| Medda ta' Frekwenzi | 400-470MHz |
| Kanal tal-Ħażna | 16 |
| Qawwa tal-Ħruġ (W) | 5W-10W (Default ≤5W) |
| Medda Massimu | 3km-5km |
| Kapaċità tal-batterija (mAh) | 2600mAH |
| Ħin tax-Xogħol | Aktar minn 12 siegħa |
| Ħin ta' Standby | 120 sigħat |
| Reżistenti għall-Ilma / Reżistenti għall-Ilma | Nru |
| Wiri_Huwa | Iva (Wiri Diġitali LED) |
| Dimensjonijiet | 265 * 62 * 41mm |
| Tip ta' Antenna | Detachable antenna (SMA-K) |
| Konnettur ospitanti | SMA-J |
| Ċertifikazzjoni | CE, FCC |
Bluetooth Headset (Model: EWN001)
Figure 14: Bluetooth Headset Specifications
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | EWN001 |
| Verżjoni | Bluetooth 5.3 |
| Kapaċità tal-batterija | 180 mAh Li-ion batterija |
| Ħin tax-Xogħol | Aktar minn 12 siegħa |
| Ħin ta' Standby | 150 sigħat |
| Ħin tal-Iċċarġjar | 2 sigħat |
| Firxa ta 'Konnessjoni Bluetooth | Madwar 10m |
| Protokoll Bluetooth | HFP, A2DP, AVRCP |
| Interface | Tip-Ċ |
Għajnuniet għall-Utent
- Frequency Programming is Key: For optimal performance and to utilize features like wireless copy and alarm, ensure your radio is properly programmed using the provided software. Pay close attention to the frequency range and specific function key assignments.
- Bluetooth Re-pairing: If you unpair your Bluetooth headset from the radio, remember to exit and re-enter the radio's pairing mode before attempting to re-pair. This ensures a fresh connection attempt.
- Ġestjoni tal-Enerġija: While the RB689 boasts a high-capacity battery, managing power output can extend usage. Use the default 5W power for shorter distances to conserve battery life, and switch to 10W only when a wider range is necessary.
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija, appoġġ tekniku, jew mistoqsijiet dwar is-servizz, jekk jogħġbok ikkuntattja lill-bejjiegħ tiegħek jew lill-manifattur direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
