Manwal tal-Istruzzjonijiet tad-Dgħajsa tal-Lixka RC Flytec V020 Smart GPS

1. Informazzjoni dwar is-Sigurtà

Please read all safety warnings and instructions carefully before operating the Flytec V020 Smart GPS RC Bait Boat. Failure to follow these instructions may result in injury or damage to the product.

• TWISSIJA: Mhux adattat għal tfal taħt l-36 xahar.
• Always operate the bait boat in open water, away from swimmers, other boats, and obstacles.
• Ensure the battery is fully charged before each use to prevent loss of control.
• Do not operate the boat in strong currents or extreme weather conditions (e.g., storms, heavy winds).
• Keep hands and loose clothing away from propellers when the boat is powered on.
• Do not attempt to modify the boat or its components, as this may void the warranty and create safety hazards.
• Store the boat and remote control in a dry, cool place when not in use.

2. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Bait Boat (V020) x 1
• Kontrollur mill-bogħod x 1
• Ċarġer tal x 1
• 7.4V 12000mAh Battery x 1
• Skrejjen żejda x 2
• Manwal ta' Istruzzjoni x 1

3. Gwida ta' Setup

3.1 Installazzjoni tal-batterija

1. Batterija tad-dgħajsa: Open the battery compartment on the bait boat. Insert the provided 7.4V 12000mAh rechargeable battery, ensuring correct polarity. Close the compartment securely.
2. 

   Figure 1: Boat battery indicator and 7.4V battery connection.

3. Batteriji tal-Kontrollur Remote: The remote controller requires 4 x 1.5V AA batteries (not included). Open the battery cover on the back of the remote control, insert the batteries with the correct polarity, and close the cover.
4. 

   Figure 2: Remote control battery compartment showing AA battery installation.

3.2 Iċċarġjar tal-Batterija tad-Dgħajsa

Connect the provided charger to the 7.4V 12000mAh boat battery. Plug the charger into a power outlet. The charging time is approximately 6-8 hours. Ensure the battery is fully charged before first use and subsequent operations.

3.3 Loading Bait

The V020 features 3 independent bait hoppers with a total capacity of up to 2kg (4.4lb).

1. Open the covers of the bait hoppers located on the top of the boat.
2. Carefully place your bait into each hopper.
3. Close the hopper covers securely to prevent bait from spilling during transit.
4. 

   Figure 3: Demonstrating bait loading into the boat's hoppers.

3.4 Attaching Hook and Line

The rear hopper includes an anti-decoupling design for attaching a fishhook and line.

1. Open the rear hopper cover.
2. Securely attach your fishhook and line to the designated buckle or slot within the rear hopper.
3. Agħlaq il-qoxra.
4. 

   Figure 4: Illustration of attaching a fishhook and line to the rear bait hopper.

4. Istruzzjonijiet Operattivi

4.1 Kontroll mill-bogħod fuqview

The remote control features an LCD display and various buttons for precise control. It operates on a 2.4Ghz frequency for stable connection up to 500 meters.

• Display LCD: Shows boat battery capacity, compass, GPS status, boat light status, current positioning point, page number, and distance.
• Bsaten tal-Kontroll: Left stick for forward/backward movement and left/right turning. Right stick for trim adjustments and hopper release.
• Buttuni:
• Buttuna tad-Dawl: Controls the boat's lights.
• Frequency Matching Button: For pairing the remote with the boat.
• Swiċċ: Qawwa mixgħul/mitfi.
• Left/Right Trim: Fine-tune steering.
• Left/Right Silo Button: Independently open left/right bait hoppers.
• Position Setting Button: Used for setting GPS anchor points.
• Up/Down/Left/Right Operation Buttons: Navigation and menu control.
• Short press to calibrate / long press to cancel calibration: For GPS calibration.
• Back to origin: Initiates automatic return to the starting point.
• Short press clear single coordinate / long press clear all coordinates: Manages GPS anchor points.
• Long press cruise control / short press cancel cruise control / short press cancel GPS automatic return: Controls cruise mode and GPS return.

Figure 5: Detailed diagram of the remote control with labeled buttons and functions.

Figure 6: Smart remote control with LCD display showing boat status.

4.2 Kalibrazzjoni Inizjali

Before first use or if experiencing navigation issues, perform an automatic calibration:

1. Poġġi d-dgħajsa fl-ilma.
2. Short press the calibration button on the remote control. The boat will perform an automatic calibration.
3. 

   Figure 7: Boat performing one-click automatic calibration.

4.3 Basic Movement

• Use the left control stick to move the boat forward, backward, left, or right.
• The boat features dual powerful motors and three-blade propellers for efficient sailing and resistance against 7-8 level winds.
• 

  Figure 8: High-speed sailing demonstrating dual powerful motors.

• 

  Figure 9: Boat navigating wavy water, showcasing 7-8 level wind resistance.

4.4 GPS Functionality (40 Anchor Points)

The V020 is equipped with a BDS+GPS dual satellite module, allowing for precise navigation and baiting.

1. Setting Anchor Points: Use the position setting button on the remote to mark up to 40 arbitrary positioning points.
2. Auto-Navigation: The boat can automatically navigate between these set points.
3. One-key Direct Access: Navigate directly to any saved positioning point with a single key press.
4. 

   Figure 10: Diagram illustrating the 40 positioning points feature.
5. 

   Figure 11: BDS+GPS Dual Satellite Module for accurate positioning.

4.5 Bait Release (One-Click Baiting)

The three hoppers can be controlled independently.

1. Navigate the boat to the desired baiting location.
2. Press the corresponding Left Silo or Right Silo button on the remote control to release bait from the chosen hopper.
3. 

   Figure 12: Bait being released from the boat's hoppers.

4.6 Cruise Control

The boat features a fixed-speed driving mode.

1. To activate cruise control, long press the designated button on the remote control.
2. To cancel, short press the same button.
3. 

   Figure 13: Remote control showing the cruise control button.

4.7 Dwal bil-lejl

The boat is equipped with 1 front white light bar and 2 rear red night lights to improve visibility during night fishing.

• Use the Lighting Button on the remote control to turn the lights on or off.
• A self-illuminating version is also available, which glows after absorbing light during the day.

Figure 14: Boat operating at night with its strong night lights.

4.8 Yaw Correction

The built-in gyroscope automatically corrects yaw, ensuring the boat maintains a straight course.

4.9 Dimostrazzjoni bil-Vidjo

Vidjo 1: Fuqview of Flytec V020 features, including hoppers, lights, GPS, and baiting.

5. Manutenzjoni

• Tindif: After each use, especially in saltwater, rinse the boat with fresh water to remove any salt, dirt, or debris. Ensure all compartments are dry before storage.
• Skrejjen: Regularly check the propellers for any entanglement (e.g., fishing line, weeds) or damage. Replace damaged propellers using the provided spares.
• Kura tal-batterija: Store the boat battery in a cool, dry place. Do not overcharge or completely discharge the battery. If storing for an extended period, charge it to about 50-60%.
• Kontroll mill-bogħod: Keep the remote control dry and clean. Remove AA batteries if storing for a long time to prevent leakage.

6 Issolvi l-problemi

• Boat not responding: Ensure both the boat and remote control are powered on and batteries are charged. Re-pair the remote and boat if necessary.
• Allarm tal-Batterija Baxxa: When the boat battery is low, the boat lights will flash, and the controller will emit an alarm sound. Return the boat to shore immediately for charging.
• 

  Figure 15: Visual indicators for low battery alarm and over-distance return.
• Lost Signal Return: If the remote control signal is poor or lost, the boat will automatically return to its starting point.
• Electronic Fence Protection: When the boat battery is low, the sailing distance is automatically limited to 150 meters to prevent loss.
• Boat not sailing straight: The built-in gyroscope should automatically correct yaw. If persistent, perform a GPS calibration.

7. Speċifikazzjonijiet

Figure 16: Product information including dimensions and key features.

8. Għajnuniet għall-Utenti

• Iċċekkja minn qabel: Always perform a quick check of the boat and remote control before heading out. Ensure all covers are sealed and propellers are clear.
• Ġestjoni tal-batterija: Carry a spare boat battery if you plan for longer fishing sessions, as the battery is removable and easy to swap.
• GPS Precision: Utilize the 40 GPS anchor points to mark your favorite fishing spots or baiting routes for consistent results.
• Viżibilità bil-lejl: The night lights are effective, but always be aware of your surroundings, especially when operating in low light conditions.
• Prattika: If new to RC bait boats, practice operating in calm, open water without bait first to get accustomed to the controls.

9. Garanzija u Appoġġ

Please note that this product is sold without an explicit warranty as per the provided specifications. For any operational issues, technical assistance, or questions regarding your Flytec V020 Smart GPS RC Bait Boat, please contact the seller directly through your purchase platform.