Manwal ta' Istruzzjoni għall-Bozoz tad-Dawl ta' Quddiem LED tas-Serje AUXITO Q16

Introduzzjoni

The AUXITO Q16 Series LED Headlight Bulbs are engineered to provide superior illumination for a wide range of automotive and motorcycle applications. Featuring advanced 12Pcs CSP chips, these bulbs deliver an impressive 20000 lumens per set and 100 watts per set, offering up to 600% brighter light compared to standard halogen bulbs. The 6000K cool white light ensures optimal visibility and a clear night vision experience, free from dark spots due to its 360-degree lighting design. Designed for ease of use, the Q16 Series boasts an all-in-one, non-polarity, plug-and-play design, simplifying the installation process. Efficient heat management is achieved through an integrated 12,000 RPM cooling fan, a copper baseboard, and a full aviation aluminum body, contributing to a long lifespan of over 50,000 hours. These bulbs are also Canbus error-free, preventing common dashboard errors and radio interference.

Speċifikazzjonijiet

Kontenut tal-Pakkett

• 2 x AUXITO Q16 Series LED Headlight Bulbs

Setup u Installazzjoni

The AUXITO Q16 Series LED Headlight Bulbs feature an all-in-one design for direct plug-and-play installation, eliminating the need for external drivers and simplifying the process. The non-polarity design means you don't have to worry about the orientation of the plug. Installation typically takes around 10 minutes.

Passi ta' Installazzjoni:

1. Locate your vehicle's existing headlight bulb. Depending on your vehicle model, you may need to remove the dust cover or other components to access the bulb.
2. Carefully remove the old halogen bulb by twisting it counter-clockwise and pulling it out. Disconnect the electrical connector.
3. Insert the new AUXITO Q16 LED headlight bulb into the housing, ensuring it is properly seated. Twist clockwise to secure it.
4. Connect the electrical connector to the new LED bulb. The non-polarity design allows for direct connection without specific orientation.
5. Test the headlights to ensure they function correctly. If applicable, replace any dust covers or components removed in step 1.

Vidjo ta 'installazzjoni:

Istruzzjonijiet Operattivi

Once installed, operating your AUXITO Q16 Series LED Headlight Bulbs is the same as operating your vehicle's original headlights.

• Turn your vehicle's headlight switch to the "ON" or "AUTO" position to activate the low beam headlights.
• To switch to high beams (for compatible bulb types like H4/9003, 9007/HB5, H13), activate your vehicle's high beam function as you normally would.
• Ensure your headlights are properly aimed after installation to prevent dazzling oncoming traffic and to maximize your visibility.

Manutenzjoni

The AUXITO Q16 Series LED Headlight Bulbs are designed for long-term, maintenance-free operation. However, following these general guidelines can help ensure optimal performance:

• **Cleaning:** Periodically clean your vehicle's headlight lenses to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solution.
• **Inspection:** Occasionally check the bulbs and their connections for any signs of damage or looseness.
• **No User-Serviceable Parts:** The LED bulbs themselves do not contain any user-serviceable parts. Do not attempt to disassemble the bulbs, as this will void the warranty.

Issolvi l-problemi

While AUXITO Q16 Series LED Headlight Bulbs are designed for reliability and Canbus compatibility, occasional issues may arise. Here are some common problems and their potential solutions:

• **Bulb Not Lighting Up:**
  • Iċċekkja l-konnessjoni elettrika biex tiżgura li hija sikura.
  • Verify that the bulb is correctly seated in the headlight housing.
  • Confirm that your vehicle's headlight fuse is not blown.
  • Due to the non-polarity design, incorrect orientation is unlikely, but re-seating the bulb can sometimes resolve connection issues.
• **Flickering or Intermittent Operation:**
  • Kun żgur li l-konnessjonijiet kollha huma ssikkati u ħielsa mill-korrużjoni.
  • While Canbus error-free, some sensitive vehicle systems might still exhibit minor flickering. This is rare but can sometimes be resolved by ensuring the vehicle's electrical system is stable.
• **Dashboard Error Message:**
  • The Q16 Series is designed to be Canbus error-free. If an error message appears, double-check the installation. In very rare cases, some highly sensitive vehicle systems may require an additional Canbus decoder (not included) if the integrated Canbus system is insufficient.
• **Radio Interference:**
  • The bulbs are designed to prevent radio interference. If you experience static on your radio, ensure the bulbs are properly grounded and all wiring is correctly installed and shielded.
• **Poor Beam Pattern or Dark Spots:**
  • Ensure the bulb is correctly oriented and seated in the headlight housing. The 360-degree lighting design should eliminate dark spots.
  • Verify that your headlight assembly is clean and free from obstructions.
  • Adjust the headlight aim if necessary.

Jekk tkompli tesperjenza problemi, jekk jogħġbok irreferi għat-taqsima "Garanzija u Appoġġ" għal informazzjoni ta' kuntatt.

Għajnuniet għall-Utent

• **Verify Compatibility:** Always double-check your vehicle's original bulb type before purchasing to ensure correct fitment.
• **Proper Alignment:** After installation, it is crucial to properly align your headlights. Incorrect alignment can reduce visibility and potentially blind oncoming drivers. Consult your vehicle's manual or a professional for proper aiming procedures.
• **Handle with Care:** When installing, avoid touching the LED chips directly with bare hands, as oils can reduce their lifespan.
• **Test Before Finalizing:** Before reassembling all components (like dust covers), test the lights to ensure they work correctly.

Garanzija u Appoġġ

AUXITO Q16 Series LED Headlight Bulbs come with a 1-Year Warranty from the date of purchase.

Termini tal-garanzija:

1. This Warranty covers defects resulting from defective parts, materials, or manufacturing, if such defects are revealed during the period of 12 months since the date of purchase.
2. The warranty covers only the products delivered according to valid online orders, but not their installation.
3. The product is considered defective if it fails to perform the functions described in the above specification or exceeds the average nominal failure rate.
4. The warranty does not cover the normal reduction of light output and the shift of the light color temperature during the lifespan of the LED chips.
5. The warranty does not cover damage due to negligence, misuse, or improper installation.
6. The warranty lapses immediately when there are modifications or repairs done without prior permission from us.

Talbiet ta' Garanzija:

Feel free to contact us to file a warranty claim if you believe you are experiencing defective products. The warranty services will be provided promptly upon meeting the following conditions:

1. Cease the use of defective products and report the technical problems to us.
2. Provide the proof of purchase that matches the order number, product serial number, or other numbers for product identification and date of purchase.
3. Photo or video of defective products, with at least one frame where the product item and its intact serial number are all captured.

Once a warranty claim is validated, we will send you a replacement, or make a partial or full refund according to the severity of defects. We reserve the right to charge the cost for delivering a replacement.

Please contact our customer service team for further assistance.