1. Prodott Aktarview
The Herdio HMA-BTB01 is a compact Bluetooth audio amplifier designed to connect Bluetooth-enabled devices to low impedance speakers. It features a built-in power amplifier and an auxiliary input for wired connections. Its small size makes it suitable for installation in various spaces, including ceiling voids.
2. Kontenut tal-Pakkett
Kun żgur li l-oġġetti kollha huma preżenti u f'kundizzjoni tajba meta tiftaħhom:
- 1 x Herdio HMA-BTB01 Bluetooth & Aux Mini Ampaktar ħaj
- 1 x 12V Power Supply Unit (PSU) with regional plug (EU/US/UK/AU plug, as selected)
3. Istruzzjonijiet ta' Setup
Follow these steps to set up your Herdio HMA-BTB01 ampaktar ħaj:
3.1 Tqegħid
- Install the Bluetooth amplifier in a dry location, such as a loft space or within a wall cavity. Avoid areas with high humidity or direct exposure to water.
3.2 Dijagramma tal-Wiring
3.3 Konnessjoni ta' Kelliema
Il- amplifier supports up to 4 speakers (4 or 8 Ohms). Connect your passive speakers to the screw terminals:
- SPK L+ / SPK L-: For Left Channel Speaker
- SPK R+ / SPK R-: For Right Channel Speaker
3.4 Qawwa tal-Konnessjoni
Connect the supplied 12V PSU to the 'Power Jack' input on the amplifier. Ensure the correct regional plug is used.
3.5 Input Awżiljarju
For wired audio sources, connect a 3.5mm audio cable from your device to the 'AUX IN' jack on the ampaktar ħaj.
3.6 TWS Switch
The TWS (True Wireless Sound) switch is located on the side of the amplifier. This switch is used when pairing two amplifiers together for a true stereo surround sound experience. Ensure the TWS switch is in the 'ON' position on both amplifiers before attempting to pair them.
4. Istruzzjonijiet Operattivi
4.1 Konnessjoni Bluetooth
Biex tikkonnettja t-tagħmir tiegħek permezz tal-Bluetooth:
- Tiżgura l- amplifier huwa mixgħul.
- Fuq it-tagħmir tiegħek li jaħdem bil-Bluetooth (smartphone, tablet, eċċ.), fittex apparati Bluetooth disponibbli.
- Select the device named "Herdio" from the list. No password is required for connection.
- Once connected, audio from your device will play through the speakers.
The Bluetooth connection has a range of up to 50 feet (approximately 15 meters).
4.2 Auxiliary Input Usage
If you prefer a wired connection or your device does not have Bluetooth, connect it using a 3.5mm audio cable to the 'AUX IN' port. The amplifier will automatically switch to the auxiliary input when a signal is detected.
4.3 TWS (True Wireless Sound) Pairing
To achieve true stereo sound with two Herdio HMA-BTB01 ampliifikaturi:
- Tiżgura t-tnejn amplifiers are powered on and their TWS switches are set to 'ON'.
- Pair your Bluetooth device to one of the ampliifikaturi. Dan amplifier will act as the master unit.
- It-tnejn amplifiers will automatically pair with each other, creating a stereo pair.
4.4 Kompatibilità
The Herdio HMA-BTB01 amplifier is compatible with various devices, including Amazon Alexa and Echo products, allowing for seamless integration into smart home audio setups.
5. Manutenzjoni
Biex tiżgura l-lonġevità u l-aħjar prestazzjoni tiegħek ampaktar ħaj:
- Keep the unit in a dry environment. Avoid exposure to moisture, rain, or extreme temperatures.
- Naddaf il-barra b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Żgura ventilazzjoni xierqa madwar l-unità biex tevita sħana żejda.
6 Issolvi l-problemi
- Ebda Ħsejjes tal-Ħsejjes:
- Iċċekkja jekk il- ampL-alimentatur huwa mixgħul u l-adapter tal-enerġija huwa konness sew.
- Verify speaker connections are correct (SPK L+/-, SPK R+/-).
- Ensure your audio source (Bluetooth device or Aux cable) is properly connected and playing audio.
- Check the volume level on both your audio source and the ampaktar ħaj.
- Kwistjonijiet ta' Tqabbil tal-Bluetooth:
- Tiżgura l- amplifier is within the 50-foot Bluetooth range of your device.
- Confirm the Bluetooth name "Herdio" appears on your device's scan list. No password is required.
- If using TWS, ensure both amplifiers have the TWS switch 'ON' before pairing your device to one of them.
- Amplifier makes noise when Bluetooth disconnects:
- This is normal behavior. When a Bluetooth device disconnects, the amplifier may emit a sound as it enters a search mode for new connections.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Isem tad-Ditta | Herdio |
| Numru tal-Mudell | HMA-BTB01 |
| Kanali | 4 |
| Qawwa Massima għal Kull Kanal | 6W |
| Total Speaker Output | Up to 4 x 80W (at 4 or 8 Ohms) |
| Verżjoni Bluetooth | 4.2 |
| Isem Bluetooth | Herdio |
| Medda Bluetooth | Sa 50 pied (15 metri) |
| Għażliet ta' Input | Bluetooth, AUX IN (3.5mm Jack) |
| Provvista tal-Enerġija | 12V PSU (Supplied) |
| Plug Specifications | EU/US/UK/AU (as selected) |
| Materjal | Plastik |
| Kulur | Iswed |
| Piż | 0.5 kg |
| Ċertifikazzjoni | CE |
| Oriġini | Iċ-Ċina kontinentali |
8. Għajnuniet għall-Utenti
- For a true stereo experience, utilize the TWS function by pairing two Herdio amplifiers. Remember to turn on the TWS switch on both units before pairing.
- The Bluetooth connection does not require a password, simply select "Herdio" from your device's Bluetooth list.
- Dejjem tiżgura l- amplifier is installed in a dry, well-ventilated area to prevent damage and ensure optimal performance.
9. Garanzija u Appoġġ
For any issues or support inquiries, please contact your retailer or the Herdio customer service. Keep your purchase receipt for warranty claims.
