Fanal Holyiot HOLYIOT-21014 Tag Manwal għall-Utent

1. Introduzzjoni

The Holyiot HOLYIOT-21014 is a versatile beacon tag designed for various applications requiring precise positioning, tracking, and environmental monitoring. It features ultra-low power consumption, a compact and waterproof design, and convenient parameter configuration via a dedicated mobile application. Equipped with a Nordic nRF52810 chip and a Lis2dh12 3-axis accelerometer sensor, it supports BLE 5.0 and is compatible with Eddystone and iBeacon protocols.

This device is suitable for a wide range of scenarios, including:

• Factory Environments: Personnel monitoring, regional alarms for dangerous areas, machine maintenance management, and statistical analysis of movement trajectories.
• Sptarijiet: Patient and staff management, materials tracking, and safety warnings for infants or emergencies.
• Prisons: Prisoner monitoring, crowd behavior alarms, security system warnings, and dynamic roll calls.
• Nursing Homes: Elderly and staff tracking, and wireless attendance.
• Parking Lots: Indoor navigation and intelligent car search.
• Tunnels/Mines: Worker supervision, equipment control, wireless attendance, and safety early warnings.
• Pavilions/Museums: Indoor navigation, intelligent tour guidance, interactive marketing, and data analysis.
• Shopping Malls/Cruise Ships/Hotels: Indoor navigation, personalized marketing, and intelligent lighting control.

2. Kontenut tal-Pakkett

Your Holyiot HOLYIOT-21014 Beacon Tag package should include:

• 1 x Holyiot HOLYIOT-21014 Beacon Tag
• (Note: CR2032 battery is not included and must be purchased separately.)

3. Speċifikazzjonijiet

4. Setup

4.1 Installazzjoni tal-Batterija

1. Gently open the beacon casing biex taċċessa l-kompartiment tal-batterija.
2. Insert a new CR2032 coin cell battery, ensuring the positive (+) side faces upwards.
3. Close the beacon casing b'mod sigur.

4.2 Installing the Holyiot-beacon App

To configure and monitor your beacon tag, you need to install the 'Holyiot-beacon' application on your smartphone (iOS 7.0+ or Android 4.3+).

1. Fittex għal "Holyiot-beacon" in your device's app store (Apple App Store or Google Play Store).
2. Alternatively, scan the QR code provided in Figure 5 to download the app.
3. Installa l-applikazzjoni fuq it-tagħmir tiegħek.

5. Operazzjoni

5.1 Connecting to the Beacon

1. Kun żgur li l-Bluetooth huwa attivat fuq l-ismartphone tiegħek.
2. Open the 'Holyiot-beacon' app.
3. Navigate to the 'Device Scanner' or 'Beacon' tab. The app will search for nearby Holyiot beacons.
4. Select your beacon from the list (e.g., 'HOLY-IOT').
5. When prompted, enter the default password: AA140G1112.
6. Once connected, you will see the device details and a function list.

5.2 Monitoring Sensor Data

After connecting, the app displays real-time data from the beacon's sensors:

• Temperatura: Temperatura ambjentali attwali.
• Umdità: Current ambient humidity (if supported by the specific beacon variant).
• Pressjoni: Current atmospheric pressure (if supported).
• Ħawwad: Indicates if vibration has been detected by the accelerometer.
• Button State: Shows the current state of the physical button on the beacon (if present).
• Batterija: Juri l-bqija tal-batterija perċentwalitage.

5.3 Configuring Beacon Parameters

The app allows you to modify various parameters of the beacon:

1. From the 'Device Details' screen, you can modify settings such as:
• Password: Change the default connection password.
• Maġġuri/Minuri: Adjust iBeacon identification values.
• MAC: View the device's MAC address.
• UUID: Modify the iBeacon UUID.
• Isem: Change the broadcast name of the beacon.
• Qawwa TX: Aġġusta l-qawwa tat-trasmissjoni.
• ADV_interval: Set the advertising interval (how frequently the beacon broadcasts).
2. To change the beacon's operating mode (Beacon, iBeacon, Eddystone), navigate to the 'Function list' and select 'Switch Type'. Choose your desired mode.

6. Manutenzjoni

6.1 Sostituzzjoni tal-batterija

The Holyiot HOLYIOT-21014 uses a standard CR2032 coin cell battery. When the battery life (approximately 180 days) is depleted, or the app indicates low battery, replace it as follows:

1. Carefully open the beacon casing.
2. Neħħi l-batterija CR2032 l-antika.
3. Daħħal batterija CR2032 ġdida, waqt li tiżgura l-polarità korretta (+ in-naħa 'l fuq).
4. Agħlaq il-ċasing firmly to maintain its IP67 waterproof rating.

6.2 Tindif

To clean the beacon, wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the casing or internal components. Ensure the device is dry before use, especially if it has been exposed to moisture.

6.3 Impermeabilizzazzjoni

The device has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. Ensure the casing is properly sealed after any maintenance to maintain this rating.

7 Issolvi l-problemi

• Device not appearing in app scan:
  • Ensure the beacon has a fresh CR2032 battery installed.
  • Ivverifika li l-Bluetooth huwa attivat fuq l-ismartphone tiegħek.
  • Make sure the beacon is within Bluetooth range (approx. 50 meters in open space).
  • Restart the Holyiot-beacon app.
• App asks for a password:
  • Il-password default hija AA140G1112. If you have previously changed it, use your custom password.
• Qari mhux preċiż tas-sensuri:
  • Ensure the beacon is placed in an environment suitable for accurate readings (e.g., not directly exposed to extreme heat/cold for temperature).
  • Check for any physical obstructions or damage to the beacon.
• Beacon not broadcasting:
  • Iċċekkja l-livell tal-batterija.
  • Verify the advertising interval (ADV_interval) is set correctly in the app.

8. Għajnuniet għall-Utenti

• Accelerometer Functionality: This beacon is equipped with an accelerometer sensor (Lis2dh12), making it suitable for applications requiring motion detection, such as tracking movement or detecting falls.
• Ġestjoni tal-batterija: The CR2032 battery is user-replaceable, allowing for easy maintenance and extended device lifespan. Keep spare batteries on hand for uninterrupted operation.
• Personalizzazzjoni: Leverage the 'Holyiot-beacon' app to customize parameters like advertising name, UUID, Major, Minor, and transmission power to suit your specific application needs.
• Sigurtà tal-Password: For enhanced security, change the default password (AA140G1112) to a unique one after initial setup.

9. Mistoqsijiet Frekwenti (FAQ)

Q: What is the primary purpose of this device?

A: It's a beacon tag with an accelerometer sensor, primarily used for indoor positioning and navigation, personnel monitoring, asset tracking, and environmental sensing.

Q: What is the default password for connecting to the beacon via the app?

A: The default password is AA140G1112.

M: Il-batterija tista' tiġi sostitwita mill-utent?

A: Yes, the device uses a standard CR2032 coin cell battery which can be replaced.

Q: How do I connect the beacon to my phone?

A: You connect via Bluetooth using the dedicated "Holyiot-beacon" application, available for iOS and Android devices.

Q: What are the main features of the HOLYIOT-21014?

A: It features a Nordic nRF52810 chip, Lis2dh12 accelerometer sensor, BLE 5.0, IP67 waterproofing, and supports Eddystone and iBeacon protocols.

10. Garanzija u Appoġġ

For technical support, troubleshooting assistance, or warranty inquiries, please contact Holyiot Official Store customer service through the platform where you purchased the product. Please provide your product model (HOLYIOT-21014) and a detailed description of the issue for efficient support.