Perkins 2485C546

Manwal tal-Istruzzjonijiet tal-Fann tar-Radjatur 2485C546

For Perkins Engine 1104D-E44T, 1104D-44T, 1104C-44, 1104C-44T, 1104C-E44T

Introduzzjoni

This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of the 2485C546 Radiator Fan. This fan is designed as a replacement part for various Perkins engine models, ensuring optimal engine cooling performance. Please read this manual thoroughly before attempting any installation or maintenance procedures.

Kompatibilità tal-Magna

The 2485C546 Radiator Fan is compatible with the following Perkins engine models:

Specific engine type codes include:

Setup u Installazzjoni

The radiator fan is a critical component of your engine's cooling system. Incorrect installation can lead to engine overheating and severe damage. It is highly recommended that installation be performed by a qualified mechanic or an individual with extensive experience in engine repair.

Lista ta' Kontroll ta' Qabel l-Installazzjoni:

Passi ta' Installazzjoni (Gwida Ġenerali):

  1. Aċċessa l-Fann: Depending on your engine model, you may need to remove shrouds, belts, or other components to gain clear access to the radiator fan.
  2. Ixxotta l-Coolant (jekk meħtieġ): If the radiator or hoses need to be moved, drain the engine coolant into a clean container for reuse or proper disposal.
  3. Neħħi l-Fann il-Qadim: Carefully unbolt the old fan from its mounting hub. Note the orientation of the fan blades before removal.
  4. Spezzjona l-Komponenti: Examine the fan clutch (if applicable) and mounting hub for any wear or damage. Replace if necessary.
  5. Installa Fann Ġdid: Position the new 2485C546 radiator fan onto the mounting hub, ensuring correct orientation. Secure it with the appropriate bolts. Tighten bolts to the manufacturer's specified torque settings.
  6. Erġa' arma: Reinstall any removed shrouds, belts, or other components.
  7. Riforniment tal-Coolant: If coolant was drained, refill the system to the correct level with the recommended coolant type.
  8. Erġa' qabbad il-batterija: Erġa' qabbad il-batterija tal-vettura.
  9. Sistema tat-Test: Start the engine and allow it to reach operating temperature. Monitor the engine temperature gauge and visually confirm that the fan engages and operates correctly. Check for any leaks.
Fuq view of the 2485C546 radiator fan
Figura 1: Fuq view of the 2485C546 radiator fan, showing its seven-blade design and central mounting hub.
Close-up of the fan hub with four bolt holes
Figura 2: Close-up view of the fan's central hub, highlighting the four bolt holes for secure mounting.

Operazzjoni

The 2485C546 radiator fan operates automatically as part of the engine's cooling system. Its primary function is to draw air through the radiator core, dissipating heat from the engine coolant. The fan is typically controlled by a thermostat or engine control unit (ECU) which activates it when the engine temperature reaches a predetermined level, or when the air conditioning is engaged.

Operazzjoni normali:

Manutenzjoni

Regular inspection of the radiator fan and surrounding components is crucial for maintaining optimal engine cooling and preventing potential issues.

Verifiki ta' Manutenzjoni Rakkomandati:

Always perform maintenance checks with the engine off and cool, and the battery disconnected for safety.

Issolvi l-problemi

If you experience issues with your engine's cooling, the radiator fan may be a contributing factor. Here are some common problems and potential solutions:

Kwistjonijiet Komuni:

SintomuKawża PossibbliAzzjoni
Tisħin żejjed tal-magnaFan not engaging, insufficient airflow, damaged fan blades.Check fan operation, inspect blades for damage, ensure radiator is clear of debris. Verify electrical connections and fan control module.
Il-fann mhux qed idurElectrical fault (fuse, relay, wiring), faulty fan motor, seized fan bearing, faulty temperature sensor/ECU.Check fuses and relays. Test fan motor directly if possible. Consult a professional for electrical diagnostics.
Ħoss jew Vibrazzjoni EċċessivDamaged or unbalanced fan blades, loose mounting, worn bearings in fan motor or fan clutch.Inspect fan blades for damage. Ensure fan is securely mounted. If noise persists, consider professional inspection of fan motor/clutch.

For complex issues or if you are unsure about any diagnostic steps, it is recommended to seek assistance from a certified mechanic.

Speċifikazzjonijiet

KaratteristikaDettall
Part Number (OEM NO.)2485C546
KundizzjoniNew, Replacement
Piż tal-oġġettMadwar 1 kg
Dijametru ĠeneraliMadwar 40 ċm (15.7 pulzieri)
Central Hub DiameterMadwar 10 ċm (3.9 pulzieri)
Central Bore DiameterMadwar 3 ċm (1.2 pulzieri)
Bolt Hole Spacing (Adjacent)Approximately 7.5 cm (3.0 inches) center-to-center
Numru ta' Xfafar7
OriġiniIċ-Ċina kontinentali

Dimensional Reference Images:

Radiator fan with a ruler indicating an overall diameter of approximately 40 cm
Figure 3: Overall diameter measurement of the fan.
Caliper measuring the central hub diameter of the fan, approximately 10 cm
Figure 4: Central hub diameter measurement.
Caliper measuring the central bore diameter of the fan, approximately 3 cm
Figure 5: Central bore diameter measurement.
Caliper measuring the bolt hole spacing on the fan hub, approximately 7.5 cm center-to-center
Figure 6: Bolt hole spacing measurement.

Għajnuniet għall-Utent

Garanzija u Appoġġ

Informazzjoni dwar il-garanzija:

Dan il-prodott jiġi ma 'a garanzija ta 'sena from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage resulting from improper installation, misuse, accident, or unauthorized modifications.

Appoġġ għall-Klijent:

For technical assistance, warranty claims, or any questions regarding your 2485C546 Radiator Fan, please contact Widen Part Store:

Widen Part Store banner with contact information including WhatsApp and Email
Figure 7: Widen Part Store contact information.

Dokumenti Relatati - 2485C546

Preview Gwida ta' Perkins Spotter - Identifikazzjoni tal-Magna
Gwida komprensiva għall-identifikazzjoni ta' magni Perkins, inklużi n-numri tal-mudelli, l-applikazzjonijiet, u l-kodiċijiet tal-magna għal diversi tagħmir industrijali u agrikolu.
Preview Gwida għall-Istening tal-Magna tas-Serje Perkins 6.354
Gwida komprensiva għall-issettjar u l-iċċekkjar tat-tajming tal-magna għall-magni Perkins tas-serje 6.354, li tkopri l-proċeduri tat-tajming tal-valvijiet u tat-tajming tal-pompa tal-fjuwil.
Preview Perkins 4012-46TAG Magni tal-Enerġija Elettrika: Speċifikazzjonijiet u Karatteristiċi
Speċifikazzjonijiet dettaljati, karatteristiċi, u informazzjoni teknika għall-Perkins 4012-46TAG serje ta' magni diesel bi 12-il ċilindru użati f'applikazzjonijiet ta' ġenerazzjoni tal-enerġija.
Preview Manwal tat-Tħaddim u l-Manutenzjoni tal-Magna Industrijali Perkins 400C
Comprehensive operation and maintenance manual for Perkins 400C series industrial engines, covering safety, operation, maintenance, specifications, and troubleshooting for models HB, HD, HH, HL, HM, HN, HP, HR, and others. Essential guide for optimal engine performance and longevity.
Preview Manwal tat-Tħaddim u l-Manutenzjoni tal-Magni Industrijali Perkins 2506J-E15TA, 2506F-E15TA, 2506EA-E15TA
This Operation and Maintenance Manual provides essential guidance for the safe and effective operation, maintenance, and troubleshooting of Perkins 2506J-E15TA, 2506F-E15TA, and 2506EA-E15TA industrial engines. It covers safety precautions, product identification, operational procedures, maintenance schedules, fluid recommendations, and troubleshooting guidance.
Preview Manwal tat-Tħaddim u l-Manutenzjoni tal-Magni Industrijali Perkins 1206J-E70TA u 1206J-E70TTA
Manwal komprensiv dwar it-tħaddim u l-manutenzjoni għall-Magni Industrijali Perkins 1206J-E70TA u 1206J-E70TTA. Jinkludi informazzjoni dwar is-sigurtà, proċeduri operattivi, skedi ta' manutenzjoni, u dettalji dwar il-garanzija.