Manwali u Gwidi għall-Utent ta' Cell2

Manwali tal-utent, gwidi tas-setup, għajnuna għas-soluzzjoni tal-problemi, u informazzjoni dwar it-tiswija għall-prodotti Cell2.

Suġġeriment: inkludi n-numru sħiħ tal-mudell stampat fuq it-tikketta taċ-Cell2 tiegħek għall-aħjar tqabbil.

Manwali ta' Cell2

L-aħħar postijiet, manwali dehru, u manwali marbuta mal-bejjiegħ bl-imnut għal din il-marka tag.

Cell2 SAF206S Gwida għall-Utent tas-Siren Elettroniċi

28 ta’ Frar, 2023
Model SAF206S Electronic Siren Installation and operation manual Notice to installer Before installation and use -- read all instructions and warnings. Deliver this manual to the end user of this equipment. Doc. No.: SAF206S Siren_v.2 GENERAL DESCRIPTION The SAF206S Siren…

Manwal għall-Utent tal-Blokk Riser Cell2 Photon 8H

28 ta’ Frar, 2023
Photon 8H Riser Block Manwal għall-Utent DAWL TA' TWISSIJA TAT-TRAFFIKU MANwal INTRODUZZJONI Dan lamp is a LED warning light for fixed or temperer/ application in road warning, informing or guiding. WIRING OPERATION For Flash Pattern Selection: While activating in Warning Mode,…

cell2 B19 LED Beacon Manwal għall-Utent

28 ta’ Frar, 2023
B19 LED Beacon User Manual WIRING / OPERATION RED: To +VDC with Fuse (Fuse Rating 5A @12-24VDC) BLACK: To Chassis Ground (-) WHOM: Apply +VDC continually for low power operation YELLOW: Flash patterns & Synchronization Connect YELLOW wires of beacons together for synchronization…

Cell2 R65 Mini Light Head Manwal għall-Utent

28 ta’ Frar, 2023
R65 MINI LIGHT HEAD User Manual Surface Mount Connect YELLOW wires of multiple light heads together for synchronization (All heads should be set at the same Flash Pattern) For Simultaneous or Alternating Flash: Apply +VDC to RED and YELLOW wires…

cell2 B12 LED Beacons Manwal għall-Utent

28 ta’ Frar, 2023
LED BEACON User Manual OPERATION RED: To +VDC BLACK: To Chassis Ground (-) FLASH PATTERN SELECTION Open Twist the dome lens counter clockwise B, then lift the dome lens to open. Change Momentarily push the red button to change to…

cell2 Reattur LED Twissija Moduli Manwal għall-Utent

28 ta’ Frar, 2023
cell2 Reactor LED Warning Modules WARNING LIGHTHEAD Wiring To+VDC for Warning Mode (fuse @ 1A):...............RED To Chassis Ground:.......................................BLACK For Synchronization and Flash Pattern:........YELLOW Connect YELLOW wires of all lightheads together for synchronization. (All lightheads should be set to the same…