AVATTO Zigbee/Thread PoE Dongle User Manual

1. Introduzzjoni

The AVATTO Zigbee/Thread PoE Dongle (Model GW90-POE-Ti) is a versatile Zigbee 3.0 gateway designed for seamless integration with smart home platforms like Home Assistant and Zigbee2MQTT. This device offers flexible connectivity options including Ethernet (with Power over Ethernet support), Wi-Fi, and USB, powered by an ESP32 and CC2652P SoC. This manual provides essential information for setting up, operating, and maintaining your dongle.

2. Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• AVATTO Zigbee/Thread PoE Dongle
• Two (2) Antennas
• Cable USB
• Bracket tal-Immuntar
• Viti u Plakek tal-Ħitan
• Manwal għall-Utent

Image: Contents of the AVATTO Zigbee/Thread PoE Dongle package, including the dongle, antennas, USB cable, mounting hardware, and user manual.

3. Prodott Aktarview u Karatteristiċi

3.1 Komponenti Ewlenin

The dongle is equipped with an ESP32 V3 Dual-Core 240 MHz processor and 16 MB Flash memory, paired with a CC2652P/CC2652P7 SoC for robust Zigbee and Thread communication.

Immaġni: Dettaljata view of the dongle's internal components, highlighting the ESP32 and CC2652P chips, 5dBi antenna gain, adjustable antennas, PoE and Type-C power options, and firmware flashing capability.

3.2 Antenna and Signal

The device features two adjustable antennas with a 5dBi gain, enhancing signal strength by approximately 3.16 times. These antennas can be rotated 360 degrees or adjusted to a 90-degree angle for optimal signal coverage and stable wireless connectivity.

Image: The AVATTO dongle showing its adjustable antennas, Type-C port, RJ45 Gigabit Ethernet port with PoE support, and options for network mode selection (Ethernet, Wi-Fi, USB).

3.3 Multiple Network Connection Modes

The dongle supports various network connection methods to suit your setup:

• Ethernet Connection (PoE Power Supply): Connect a network cable for a stable and reliable network signal. If your router or switch supports PoE, the device can be powered directly through the Ethernet cable. Otherwise, a separate PoE power supply module is required.
• Konnessjoni Wi-Fi: The device can establish a stable Wi-Fi network, allowing flexible placement anywhere in your home.
• Konnessjoni USB: Connect directly to a Home Assistant Box using the provided USB cable.

Image: Visual representation of the three supported network connection modes: Ethernet (with PoE), Wi-Fi, and USB, demonstrating how to connect the dongle in each scenario.

3.4 Għażliet tal-Provvista tal-Enerġija

The dongle can be powered via Power over Ethernet (PoE) through its RJ45 port or directly via a Type-C USB connection. If PoE is not supported by your network equipment, use the Type-C port for power.

3.5 Kompatibilità

This gateway is compatible with a wide range of Zigbee devices and integrates seamlessly with Home Assistant (ZHA), Zigbee2MQTT, and iobroker. It supports various Home Assistant setups including Home Assistant Green/Yellow, Raspberry Pi, AVATTO HA70, and AVATTO HA80.

Image: Diagram illustrating various application scenarios, showing the AVATTO dongle connected to Home Assistant Green, Home Assistant Yellow, AVATTO HA70, Raspberry Pi, and AVATTO HA80, highlighting its compatibility with Home Assistant, Zigbee2MQTT, and Zigbee 3.0.

Image: An illustration demonstrating the AVATTO gateway's role in a smart home system, connecting to Home Assistant, Zigbee2MQTT, and iobroker, and controlling various Zigbee devices.

4. Istruzzjonijiet ta' Setup

4.1 Konnessjoni Fiżika

1. Waħħal Antenni: Screw the two provided antennas onto the connectors on the dongle. Ensure they are securely fastened.
2. Agħżel Sors tal-Enerġija:
   • PoE: If using Power over Ethernet, connect an Ethernet cable from a PoE-enabled router or switch to the dongle's RJ45 port.
   • Tip-Ċ: If PoE is not available, connect a Type-C USB cable to the dongle's Type-C port and to a suitable power adapter (not included).
3. Choose Data Connection:
   • Ethernet: Connect an Ethernet cable from your network to the dongle's RJ45 port.
   • Wi-Fi: The device will broadcast a Wi-Fi signal for initial setup.
   • USB: Connect the provided USB cable from the dongle to your Home Assistant host device.

4.2 Konfigurazzjoni Inizjali

After physical connection, the dongle can be configured via its web interface. Refer to the device's documentation or the AVATTO website for specific instructions on accessing the web interface and selecting your preferred network mode (Ethernet, Wi-Fi, or USB).

For further resources and detailed guides, visit www.avattosmart.com.

5. Istruzzjonijiet Operattivi

5.1 Integrating with Home Assistant / Zigbee2MQTT

Once the dongle is powered and connected to your network, it can be integrated into your smart home system:

• Home Assistant (ZHA): Follow the official Home Assistant documentation for adding a new Zigbee coordinator via the ZHA integration. The dongle should be automatically detected or can be manually added.
• Zigbee2MQTT: Configure Zigbee2MQTT to use the dongle as its coordinator. Ensure the correct serial port path or network address is specified in the Zigbee2MQTT configuration file.

5.2 Aġġornamenti tal-Firmware

Firmware updates are performed directly through the device's web interface. Regularly check for updates to ensure optimal performance and access to new features. Consult the AVATTO websit għall-aħħar verżjonijiet tal-firmware u l-proċeduri tal-aġġornament.

6. Manutenzjoni

• Pjazzament: Ensure the dongle is placed in a well-ventilated area to prevent overheating. Avoid placing it near large metal objects that could interfere with wireless signals.
• Provvista tal-Enerġija: Use a stable and appropriate power supply (PoE or Type-C) to prevent operational issues.
• Firmware: Periodically check for and apply firmware updates to maintain security and functionality.
• Tindif: Use a soft, dry cloth to clean the device. Do not use liquid cleaners.

7 Issolvi l-problemi

• Apparat mhux Jirrispondi: Check all power and network connections. Ensure the power source is active and the cables are securely plugged in.
• L-ebda Konnessjoni man-Netwerk: Verify your Ethernet cable is functional or that your Wi-Fi credentials are correctly entered in the device's configuration. If using PoE, confirm your network equipment supports it.
• Apparati Zigbee Mhux Qed Jitqabblu: Ensure the dongle is in pairing mode and within range of your Zigbee devices. Check for any interference from other wireless devices.
• Kwistjonijiet ta' Aġġornament tal-Firmware: Ensure a stable internet connection during firmware updates. Do not power off the device during the update process.

For more detailed troubleshooting guides and support, please visit the official AVATTO websit fuq www.avattosmart.com.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Warranty information for the AVATTO Zigbee/Thread PoE Dongle (Model GW90-POE-Ti) is not provided in this manual. For details regarding warranty terms and conditions, please refer to the product packaging or contact AVATTO customer support directly.

For technical support, frequently asked questions, and additional resources, please visit the official AVATTO websit:

www.avattosmart.com