RECOIL IC4A

RECOIL IC4A Waterproof Bluetooth 4-Channel AmpManwal ta 'l-Utent aktar ħaj

1. Prodott Aktarview

The RECOIL IC4A is a waterproof Bluetooth 4-channel amplifier designed for various outdoor and marine applications, including boats, UTVs, Jeeps, golf carts, and motorcycles. It features Bluetooth 5.0 for wireless audio streaming and a 3.5mm AUX input for wired connections. The amplifier delivers 65W RMS per channel at 2Ω or 45W x 4 at 4Ω, providing robust audio performance. Its IPX7 rating ensures protection against water immersion and dust, making it suitable for harsh environments. An included wired remote knob allows for convenient control of volume, track selection, play/pause, and input switching.

RECOIL IC4A amplifier with IPX7 and Bluetooth 5.0 logos, surrounded by water splashes

Figure 1: RECOIL IC4A Amplifier with IPX7 Waterproof and Bluetooth 5.0 features.

2. X'hemm fil-Kaxxa

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni.

  • RECOIL IC4A Waterproof Bluetooth 4-Channel Ampaktar ħaj
  • Wired Remote Control Knob
  • Qawwa ta 'l-Enerġija u ta' l-Ispeaker
  • 3.5mm AUX Input Cable
  • Mounting Hardware (Surface mount bracket, flush mount ring, handlebar clamp for 7/8" to 1-1/4" bars, screws, washers, nuts)
  • Inline Fuse Holder with Fuse
  • Manwal għall-Utent (dan id-dokument)
All components included with the RECOIL IC4A amplifier, laid out on a white background

Figure 2: Included components of the RECOIL IC4A ampkit lifier.

3. Setup u Installazzjoni

Installazzjoni xierqa hija kruċjali għall-aħjar prestazzjoni u l-lonġevità tal-apparat tiegħek ampinstallatur. Jekk m'intix ċert dwar xi passi, ikkonsulta installatur professjonali.

3.1 Immuntar tal- Ampaktar ħaj

Choose a secure location that is protected from direct heat and allows for proper cable routing. The amplifier is IPX7 rated, meaning it can withstand immersion in water up to 1 meter for 30 minutes, but avoiding prolonged exposure is recommended for maximum lifespan.

  • Immonta fil-wiċċ: Use the provided bracket and screws to secure the amplifier to a flat surface.
  • Aħsel Mount: If applicable, use the flush mount ring to integrate the amplifier into a panel.
RECOIL IC4A amplifier with its wiring harness connected, showing various color-coded wires

Figure 3: RECOIL IC4A amplifier with wiring harness.

3.2 Konnessjonijiet tal-Wiring

Refer to the wiring diagram below and ensure all connections are secure and properly insulated.

  1. Qawwa (Wajer Aħmar): Connect to a fused +12V constant power source. Use the included inline fuse holder.
  2. Art (Wajer Iswed): Connect to a clean, solid chassis ground point.
  3. Tixgħel mill-Bogħod (Wajer Blu): Connect to the remote output of your head unit or an ignition-switched +12V source.
  4. Speaker Outputs (Color-Coded Wires): Connect to your speakers. Ensure correct polarity (+/-) for each speaker. The amplifier supports 2Ω and 4Ω loads.
  5. Input AUX (Ġakk ta' 3.5mm): Connect your audio source (e.g., smartphone, MP3 player) using the provided 3.5mm cable.

3.3 Installazzjoni tal-Kontroll mill-Bogħod

The wired remote control can be mounted in a convenient location, such as a handlebar or dashboard.

  • Muntaġġ tal-manubriju: Uża l-cl ipprovdutamp to secure the remote to handlebars ranging from 7/8" to 1-1/4" in diameter.
  • Surface/Flush Mount: The remote can also be surface-mounted or flush-mounted using the appropriate hardware.
  • Connect the remote control cable to the designated port on the ampaktar ħaj.
RECOIL IC4A remote control mounted on a motorcycle handlebar with a scenic road in the background

Figure 4: Remote control mounted on a handlebar.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

Il- amplifier powers on automatically when it receives a +12V signal on the remote turn-on wire (blue). It will power off when this signal is removed.

4.2 Streaming tal-Awdjo Bluetooth

The IC4A features Bluetooth 5.0 for wireless audio playback.

  1. Tiżgura l- amplifier huwa mixgħul.
  2. Fuq it-tagħmir mobbli tiegħek, ippermetti l-Bluetooth u fittex tagħmir disponibbli.
  3. Select "RECOIL IC4A" from the list to pair. A confirmation tone may sound.
  4. Ladarba jkun imqabbad, tista' tixxandar l-awdjo mingħajr fili mit-tagħmir tiegħek.
RECOIL IC4A amplifier with 'Built-in Bluetooth Audio Streaming' text and Bluetooth 5.0 logo

Figura 5: Amplifier with Bluetooth 5.0 capability.

4.3 Użu tal-Input AUX

For wired audio connections, use the 3.5mm AUX input.

  1. Qabbad is-sors tal-awdjo tiegħek mal- amplifier's 3.5mm AUX input using the provided cable.
  2. Switch the input source to AUX using the remote control (see Section 4.4).

4.4 Funzjonijiet ta' Kontroll mill-bogħod

The wired remote control provides convenient access to essential audio functions.

Diagram showing the functions of the RECOIL IC4A remote control knob: BT/AUX switch, Play/Pause, Volume Up/Down, Previous/Next Track

Figure 6: Remote control functions diagram.

  • BT/AUX Switch: Push and hold for 2 seconds to switch between Bluetooth and AUX input modes.
  • Play/Pawsa: Push once to play or pause audio.
  • Volum 'il fuq: Turn right and hold.
  • Volum 'l isfel: Turn left and hold.
  • Track preċedenti: Quick turn left.
  • Track li jmiss: Quick turn right.

5. Manutenzjoni

To ensure the longevity and optimal performance of your RECOIL IC4A amplifer, segwi dawn il-linji gwida tal-manutenzjoni:

  • Tindif: Imsaħ perjodikament il- amplifier and remote control with a soft, damp drapp. Evita li tuża kimiċi ħarxa jew tindif li joborxu.
  • Konnessjonijiet: Regularly check all wiring connections for tightness and corrosion, especially in marine or outdoor environments. Loose connections can lead to poor performance or damage.
  • Fjus: Jekk il- amplifier stops working, check the inline fuse. Replace it only with a fuse of the same type and rating.
  • Protezzjoni Ambjentali: While the unit is IPX7 waterproof, minimizing prolonged exposure to extreme conditions (e.g., direct sunlight, heavy rain, saltwater spray) when not in use can extend its lifespan.

6 Issolvi l-problemi

If you encounter issues with your RECOIL IC4A amplifer, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

ProblemaKawża PossibbliSoluzzjoni
Bla Qawwa / Amplifier Mhux Mixgħul
  • Fjus minfuħ
  • Konnessjoni maħlula tal-enerġija jew tal-art
  • L-ebda sinjal ta' mixgħul mill-bogħod
  • Batterija tal-vettura baxxa
  • Iċċekkja u ibdel il-fjus jekk meħtieġ (uża l-klassifikazzjoni korretta).
  • Iċċekkja li l-konnessjonijiet kollha tal-enerġija u tal-art ikunu sikuri.
  • Ensure the remote turn-on wire receives +12V when the audio source is on.
  • Iċċarġja jew ibdel il-batterija tal-vettura.
Ebda Output Awdjo
  • Sors ta' input magħżul mhux korrett
  • Bluetooth not paired or AUX cable loose
  • Il-wajers tal-ispikers skonnettjati jew shorted
  • Volum baxx wisq
  • Switch input mode using the remote control.
  • Re-pair Bluetooth device or check AUX cable connection.
  • Inspect speaker wiring for proper connection and no shorts.
  • Increase volume on both the remote and your audio source.
Ħoss Mgħawġ
  • Volum għoli wisq (qtugħ)
  • Konnessjoni ħażina tal-ispiker
  • Kelliema bil-ħsara
  • Reduce volume on both amplifier u sors awdjo.
  • Check speaker wiring for secure connections.
  • Test with different speakers if possible.
Skonnettjar Bluetooth
  • Apparat barra mill-firxa
  • Interferenza
  • Mexxi l-apparat eqreb lejn ampaktar ħaj.
  • Avoid placing other wireless devices near the ampaktar ħaj.
  • Ipprova erġa' qabbad l-apparat.

7. Speċifikazzjonijiet

Key technical specifications for the RECOIL IC4A ampaktar ħaj:

RECOIL IC4A amplifier with text indicating power handling: 65 Watts x 4 at 2 Ohm, 45 Watts x 4 at 4 Ohm

Figure 7: Power handling specifications.

  • Mudell: IC4A
  • Kanali: 4-Kanal
  • Ħruġ tal-Qawwa RMS:
    • 65 Watts x 4 @ 2 Ohm
    • 45 Watts x 4 @ 4 Ohm
  • Qawwa massima tal-Ħruġ: 260 Watts
  • Verżjoni Bluetooth: 5.0
  • Klassifikazzjoni li ma jgħaddix ilma minnha: IPX7 (Sommerġibbli sa metru għal 30 minuta)
  • Inputs: Bluetooth, 3.5mm AUX
  • Tip ta 'Immuntar: Surface Mount, Handlebar Mount
  • Komponenti Inklużi: Amplifier, Wired Remote, Wiring Harness, AUX Cable, Mounting Hardware
  • Ċirkwiti ta' Protezzjoni: Auto-recovery short-circuit, reverse polarity, thermal overload

8. Garanzija u Appoġġ

8.1 Garanzija tal-Manifattur

The RECOIL IC4A ampil-lifer huwa kopert minn Garanzija tal-Manifattur ta' Sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.

8.2 Appoġġ għall-Klijent

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact RECOIL customer support. Refer to the official RECOIL webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għall-aktar informazzjoni ta' kuntatt aġġornata.

Meta tikkuntattja l-appoġġ, jekk jogħġbok żomm l-informazzjoni li ġejja lesta:

  • Product Model: RECOIL IC4A
  • Data tax-Xiri
  • Post tax-Xiri
  • Deskrizzjoni dettaljata tal-kwistjoni

© 2026 RECOIL. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.