NEWONE 18V Cordless 5-in-1 Power Tool Combo Kit User Manual

Introduzzjoni

Thank you for choosing the NEWONE 18V Cordless 5-in-1 Power Tool Combo Kit. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new tool kit. Please read this manual thoroughly before using the product and keep it for future reference.

This kit includes a main power unit and five interchangeable attachments: an Impact Driver, a Drill, a Palm Sander, a Work Light, and a Circular Saw. It also comes with two batteries and a fast charger.

Istruzzjonijiet Ġenerali dwar is-Sigurtà

TWISSIJA: Aqra t-twissijiet, l-istruzzjonijiet, l-illustrazzjonijiet u l-ispeċifikazzjonijiet kollha dwar is-sigurtà pprovduti ma’ din l-għodda tal-enerġija. In-nuqqas li ssegwi l-istruzzjonijiet kollha elenkati hawn taħt jista’ jirriżulta f’xokk elettriku, nar, u/jew korriment serju.

Sigurtà taż-Żona tax-Xogħol

• Żomm iż-żona tax-xogħol nadifa u mdawwal sew. Żoni imbarazz jew mudlama jistiednu inċidenti.
• Tħaddimx għodod elettriċi f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab li jaqbdu. Għodod tal-enerġija joħolqu xrar li jistgħu jaqbdu t-trab jew dħaħen.
• Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod waqt li tħaddem għodda tal-enerġija. Distrazzjonijiet jistgħu jikkawżaw inti titlef il-kontroll.

Sigurtà Elettrika

• Il-plaggs tal-għodda tal-enerġija għandhom jaqblu mal-iżbokk. Qatt mmodifika l-plagg bl-ebda mod. Tużax l-ebda plaggs ta' l-adapter b'għodda ta' l-enerġija ertjati (ert). Plakek mhux modifikati u ħwienet li jaqblu se jnaqqsu r-riskju ta 'xokk elettriku.
• Evita l-kuntatt tal-ġisem ma 'uċuħ ertjati jew ertjati, bħal pajpijiet, radjaturi, firxiet, u refriġeraturi. Hemm riskju akbar ta 'xokk elettriku jekk ġismek ikun ertjat jew ertjat.
• Tesponix l-għodod elettriċi għax-xita jew kundizzjonijiet imxarrba. L-ilma li jidħol f'għodda tal-enerġija jżid ir-riskju ta 'xokk elettriku.

Sigurtà Personali

• Dejjem ilbes protezzjoni għall-għajnejn. Uża tagħmir ta’ sigurtà xieraq bħal maskri tat-trab, żraben tas-sigurtà li ma jiżolqux, elmi protettivi, jew protezzjoni għas-smigħ meta jkun meħtieġ.
• Ilbes sew. Tilbesx ħwejjeġ maħlula jew dehbijiet. Żomm ix-xagħar u l-ilbies tiegħek 'il bogħod minn partijiet li jiċċaqilqu.
• Oqgħod attent, oqgħod attent x'qed tagħmel, u uża s-sens komun meta tħaddem għodda tal-enerġija. Tużax għodda tal-enerġija waqt li tkun għajjien jew taħt l-influwenza tad-drogi, l-alkoħol, jew medikazzjoni.

Użu u Kura tal-Għodda tal-Enerġija

• Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek.
• Skonnettja l-pakkett tal-batterija mill-għodda tal-enerġija qabel ma tagħmel xi aġġustamenti, tbiddel l-aċċessorji, jew taħżen għodda tal-enerġija.
• Aħżen l-għodda tal-enerġija inattivi fejn ma tintlaħaqx mit-tfal u tħallix persuni li mhumiex familjari mal-għodda tal-enerġija jew dawn l-istruzzjonijiet biex joperaw l-għodda tal-enerġija.
• Żomm għodod elettriċi u aċċessorji. Iċċekkja għal allinjament ħażin jew irbit ta 'partijiet li jiċċaqilqu, ksur ta' partijiet, u kwalunkwe kundizzjoni oħra li tista 'taffettwa l-operat tal-għodda tal-enerġija. Jekk tkun bil-ħsara, issewwi l-għodda tal-enerġija qabel l-użu.

Użu u Kura tal-Għodda tal-batterija

• Iċċarġja mill-ġdid biss bil-ċarġer speċifikat mill-manifattur. Ċarġer li huwa adattat għal tip wieħed ta' pakkett ta' batterija jista' joħloq riskju ta' nar meta jintuża ma' pakkett ta' batterija ieħor.
• Uża power tools biss ma' pakketti ta' batteriji magħżula speċifikament. L-użu ta' kwalunkwe pakkett ta' batteriji ieħor jista' joħloq riskju ta' korriment u nar.
• Meta l-pakkett tal-batterija ma jkunx qed jintuża, żommu 'l bogħod minn oġġetti oħra tal-metall, bħal klipps tal-karti, muniti, ċwievet, imsiemer, viti jew oġġetti żgħar oħra tal-metall, li jistgħu jagħmlu konnessjoni minn terminal għal ieħor. Tqassar it-terminali tal-batterija flimkien jista 'jikkawża ħruq jew nar.
• Taħt kundizzjonijiet abbużivi, likwidu jista 'jinħareġ mill-batterija; evita kuntatt. Jekk iseħħ kuntatt aċċidentalment, laħlaħ bl-ilma. Jekk il-likwidu jikkuntattja l-għajnejn, fittex ukoll għajnuna medika. Likwidu li joħroġ mill-batterija jista 'jikkawża irritazzjoni jew ħruq.

Komponenti tal-Prodott

Your NEWONE 5-in-1 Power Tool Combo Kit includes the following main components:

• Main Power Unit (Handle, Motor, Trigger, Locking Switch, Direction Switch, LED Light)
• 18V Lithium-Ion Batteries (2 included: 4000mAh and 2000mAh)
• Charger Fast
• Impact Driver Attachment
• It-twaħħil tat-tħaffir
• Palm Sander Attachment
• Work Light Attachment
• Circular Saw Attachment
• Borża tal-Ġarr

Figure 1: Main Power Unit and Drill Attachment Components. This image illustrates the key parts of the main power unit, including the trigger, handle, motor, locking switch, direction switch, battery unlock button, and LED light, with the drill attachment connected.

Figure 2: Complete Kit Contents. This image displays all components included in the kit: the LED light, circular saw, impact driver, drill, palm sander attachments, two batteries, charger, and the carrying bag.

Setup u Assemblea

1. Iċċarġjar tal-batterija

1. Qabbad il-ċarġer veloċi ma' sokit standard tal-enerġija.
2. Żerżaq il-pakkett tal-batterija fuq il-ċarġer sakemm tikklikkja f'postu.
3. The charger indicator light will show the charging status. A full charge typically takes 1-2 hours.
4. Ladarba tkun iċċarġjata kompletament, skonnettja l-batterija mill-ċarġer.

Note: It is recommended to fully charge new batteries before first use to ensure optimal performance and lifespan.

2. Attaching a Tool Head

The NEWONE power tool features a patented quick-release system for easy attachment changes.

1. Ensure the main power unit is turned off and the battery is removed for safety.
2. Align the desired attachment (e.g., Drill, Impact Driver, Circular Saw) with the main power unit's connection point.
3. Push the attachment firmly onto the main unit until it clicks securely into place.
4. Rotate the locking knob on the motor to the locked position to ensure the attachment is firmly secured.

3. Removing a Tool Head

1. Ensure the main power unit is turned off and the battery is removed.
2. Rotate the locking knob on the motor to the unlocked position.
3. Press the quick-release button (if applicable) and pull the attachment away from the main unit.

4. Installazzjoni/Tneħħija tal-Batterija

1. To install: Align the battery pack with the base of the main power unit. Slide it in until it clicks securely.
2. To remove: Press the battery unlock button located on the battery pack and slide the battery out.

Figure 3: Quick Setup Guide. This image provides a visual step-by-step guide for attaching a tool head, securing it, inserting the battery, and starting the tool.

Istruzzjonijiet Operattivi

Operazzjoni Ġenerali

1. Ensure the correct attachment is securely installed and the battery is fully charged and inserted.
2. Select the desired direction of rotation using the direction switch (forward/reverse).
3. Press the trigger to start the tool. The speed is typically variable based on trigger pressure.
4. Itlaq il-grillu biex twaqqaf l-għodda.

Specific Attachment Operations

1. Drill Attachment

The drill attachment is used for drilling holes and driving screws. It has a maximum speed of 1300 RPM.

• Nibdlu Drill Bits: Loosen the chuck by hand, insert the drill bit, and tighten the chuck firmly.
• Tħaffir: Apply steady, even pressure. For harder materials, use a slower speed.
• Viti tas-sewqan: Use appropriate screwdriver bits. Adjust clutch settings (if available on the drill head) to prevent over-driving screws.

2. Impact Driver Attachment

The impact driver is designed for driving screws and fasteners with high torque, up to 150 N·m, and a maximum speed of 2700 RPM.

• Nibdlu Bits: Pull the collar forward, insert the hex shank bit, and release the collar to lock the bit in place.
• Operazzjoni: The impact mechanism engages when resistance is met, providing powerful rotational force.

3. Circular Saw Attachment

The circular saw attachment is for cutting wood and other materials. It has a no-load speed of 4500 RPM, a blade diameter of 85mm (3-3/8 inch), and a max cutting depth of 21mm (90°) or 14.8mm (45°).

• Installazzjoni tax-xafra: Refer to the attachment's specific instructions for safe blade changes. Always ensure the blade is installed correctly and securely.
• Qtugħ: Set the desired cutting depth and angle. Ensure the workpiece is clamped securely. Guide the saw smoothly through the material, allowing the blade to do the work.
• Sigurtà: Always wear appropriate eye protection and ensure guards are in place.

4. Palm Sander Attachment

The palm sander attachment is used for smoothing surfaces with a no-load speed of 10000 RPM.

• Twaħħil ta' Sandpaper: Ensure the sander pad is clean. Align the sandpaper with the pad and press firmly to secure it (hook-and-loop system).
• Xkatlar: Move the sander in overlapping passes over the surface. Do not apply excessive pressure; let the sander do the work.

5. Work Light Attachment

The work light provides 300 lumens of illumination for dark work areas.

• Operazzjoni: Simply attach to the main unit and press the trigger to activate the light. It can be used independently of other tool functions.

Figure 4: Versatile Applications. This image demonstrates the various uses of the NEWONE 5-in-1 tool kit, including cutting, sanding, driving screws, drilling, and providing illumination.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your NEWONE power tools.

Tindif

• Dejjem skonnettja l-batterija qabel ma tnaddafha.
• Uża nadif, damp drapp biex timsaħ il-barra tal-għodda. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Clear dust and debris from ventilation openings using compressed air or a soft brush.
• For attachments like the sander, regularly clean the sanding pad and remove any accumulated dust.

Ħażna

• Store the tool kit and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.
• Use the provided carrying bag for organized storage and transport.
• Ensure batteries are partially charged (around 50%) before long-term storage to preserve their lifespan.

Kura tal-batterija

• Taħżinx il-batteriji fi stat skarikat. Erġa' ċċarġjahom perjodikament jekk ma tużahomx għal perjodi twal.
• Avoid exposing batteries to water or extreme heat.
• If a battery is damaged or no longer holds a charge, dispose of it responsibly according to local regulations.

Issolvi l-problemi

This section addresses common issues you might encounter with your NEWONE power tool kit.

If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact NEWONE customer support.

Speċifikazzjonijiet

Below are the technical specifications for the NEWONE 18V Cordless 5-in-1 Power Tool Combo Kit.

Figure 5: Motor and Battery Details. This image illustrates the powerful motor and the high-capacity battery system, detailing battery capacities, charging time, and typical working duration.

Garanzija u Appoġġ

NEWONE products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official NEWONE websit.

For technical support, replacement parts, or service inquiries, please contact NEWONE customer service. You can often find contact information on the product packaging or the brand's official websit.

Visit the official NEWONE Store for more products and support: NEWONE Store on Amazon