Introduzzjoni
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your BOJUK Window Cleaning Robot, Model C260. Please read this manual thoroughly before using the device to ensure optimal performance and safety.
Istruzzjonijiet Importanti dwar is-Sigurtà
- Always attach the safety rope securely before operation, especially for high-rise windows.
- Ensure the power cord is properly connected and not damaged.
- Do not use the robot on cracked or damaged glass surfaces.
- Żomm idejk, xagħar, u ħwejjeġ maħlula 'l bogħod minn partijiet li jiċċaqilqu.
- Do not operate in rainy or extremely humid conditions.
- Supervise the robot during operation, especially during initial use.
- The Uninterrupted Power System (UPS) provides approximately 25 minutes of backup power in case of an outage. Retrieve the robot promptly during a power loss.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- 1x Main Unit (Window Cleaning Robot)
- 1x Korda tal-Enerġija AC
- 4x Cleaning Rings
- 1x Kontroll mill-bogħod
- 1x DC Extension Cord
- 1x Safety Rope
- 1x Adapter tal-Enerġija
- 10x Cleaning Cloths
- 1x Manwal tal-Utent (dan id-dokument)
Setup
- Waħħal id-Drappijiet tat-Tindif: Securely attach two clean microfiber cloths to the cleaning rings on the underside of the robot. Ensure they are flat and cover the entire cleaning pad area.
Image: Underside of the BOJUK Window Cleaning Robot showing the two circular cleaning pads where cloths are attached. The robot is white with blue cleaning pads.
- Imla t-Tank tal-Ilma: Open the water tank cap and fill with clean water or a recommended window cleaning solution. Do not overfill. The robot features a dual spray system for effective cleaning.
Image: Diagram illustrating the dual spray system of the BOJUK Window Cleaning Robot. Water is sprayed from two nozzles onto the cleaning pads, ensuring even dampness for deep cleaning.
- Qabbad l-Enerġija: Connect the AC power cord to the power adapter, then connect the adapter to the robot and a power outlet. Ensure the connection is secure.
- Waħħal il-Ħabel tas-Sigurtà: Securely attach one end of the safety rope to the robot and the other end to a sturdy anchor point indoors, such as a heavy furniture leg or a window frame anchor. This is crucial for preventing falls.
Image: The BOJUK Window Cleaning Robot operating on a window, with its safety rope secured to an indoor anchor point.
Istruzzjonijiet Operattivi
- Pjazzament: Place the robot on the window surface. Ensure it is flat against the glass. The robot will automatically create suction.
- Ibda t-Tindif: Press the power button on the robot or the "Start" button on the remote control. The robot will begin its cleaning cycle.
Image: The BOJUK Window Cleaning Robot operating on a window, with its remote control shown in the foreground. The remote allows selection of different cleaning modes and manual control.
- Agħżel il-Modalità tat-Tindif: Use the remote control to select one of the three cleaning modes:
- Top-down (N-mode): Cleans from top to bottom.
- Left-down (Z-mode): Cleans from left to right, then down.
- Right-down (Z-mode): Cleans from right to left, then down.
- Kontroll manwali: For specific areas, use the directional arrows on the remote control to guide the robot manually.
- Tlestija: The robot will automatically stop and return to its starting position once the cleaning cycle is complete. It will emit an audible alert.
- Retrieve Robot: Carefully grasp the robot and press the power button to release suction. Remove it from the window.
Manutenzjoni
- Ċraret tat-Tindif: After each use, remove and wash the microfiber cleaning cloths. They are machine-washable. Ensure they are completely dry before reuse.
- Tank tal-Ilma: Empty any remaining water from the tank after use. Clean the tank periodically to prevent residue buildup.
- Sensers: Regularly wipe the edge detection sensors and optical sensors with a soft, dry cloth to ensure accurate navigation.
- Ħażna: Store the robot and its accessories in a cool, dry place away from direct sunlight.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Robot does not stick to window. | Insufficient suction; power not connected; surface too uneven or dirty. | Ensure power is connected. Clean the window surface first. Check for cracks or large imperfections on the glass. |
| Ir-robot iħalli strixxi. | Dirty cleaning cloths; insufficient water/solution; window too dirty. | Replace or wash cleaning cloths. Refill water tank. For very dirty windows, perform a dry clean first, then a wet clean. |
| Robot gets stuck or navigates erratically. | Dirty sensors; obstacles on window; frameless window edge detection issue. | Clean all sensors. Remove any stickers or debris from the window. The robot is designed for frameless windows but may slow down at edges. |
| Robot falls during power outage. | Safety rope not attached; UPS battery depleted. | Always attach the safety rope. The UPS provides 25 minutes; retrieve the robot promptly during a power loss. |
Speċifikazzjonijiet
| Isem tal-Mudell | Robot tat-Tindif tat-Twieqi |
| Numru tal-Mudell | C260 |
| Brand | BOJUK |
| Qawwa tal-ġbid | 3200Pa |
| Dimensjonijiet (L x W x H) | 23L x 11.4W x 30H Ċentimetri |
| Piż | 2.5 Liri |
| Livell ta' Storbju | 65 Deċibel |
| Ħajja tal-Batterija (UPS) | 25 minutes (Uninterrupted Power System) |
| Sors tal-Enerġija | Corded Elettriku |
| Tip ta' Kontrollur | Kontroll mill-bogħod, Kontroll Touchpad |
| Rakkomandazzjoni tal-wiċċ | Windows, Tiles, Glass Doors, Mirrors |
| Karatteristiċi Speċjali | Dual Spray, AI Path Planning, Edge Detection, Anti-Drop Protection, 5m Safety Rope |
Garanzija u Appoġġ
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official BOJUK websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.