Phanteks XT View Matriċi

Phanteks XT View Matrix Mid-Tower Gaming Case Instruction Manual

Mudell: XT View Matriċi

1. Introduzzjoni

Il-Phanteks XT View Matrix is a high-performance mid-tower gaming case designed for enthusiasts. It features an immersive 600 LED Matrix screen, dual tempered glass panels, and optimized airflow for superior cooling. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case.

Phanteks XT View Matrix Mid-Tower Gaming Case with RGB fans

Image 1.1: The Phanteks XT View Matrix Mid-Tower Gaming Case, showcasing its white exterior and vibrant RGB fans visible through the tempered glass panels.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the product.

  • Dejjem skonnettja l-provvista tal-enerġija mis-sokit tal-ħajt qabel ma twettaq kwalunkwe installazzjoni jew manutenzjoni.
  • Avoid exposing the case to moisture or extreme temperatures.
  • Immaniġġja l-pannelli tal-ħġieġ ittemprat b'attenzjoni biex tevita li jinkisru.
  • Keep small components and tools away from children.
  • Żgura ertjar xieraq biex tevita perikli elettriċi.

3. Gwida għall-Installazzjoni

This section outlines the steps for installing your PC components into the Phanteks XT View Matrix case.

3.1. Tħejjija tal-Każ

Remove the side panels by unscrewing the thumbscrews at the rear of the case and gently sliding the panels off. For tempered glass panels, exercise caution.

Intern view of Phanteks XT View Matrix case showing mounting points

Immaġni 3.1: Interna view of the case, highlighting various mounting points for components such as fans, storage drives, and cable management routes.

3.2. Installazzjoni tal-Motherboard

  1. Installa l-ilqugħ tal-I/O fil-ftuħ ta' wara tal-kaxxa.
  2. Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's screw holes.
  3. Waħħal il-motherboard bil-viti pprovduti.

3.3. Installazzjoni tal-Unità tal-Provvista tal-Enerġija (PSU)

  1. Sib iż-żona tal-immuntar tal-PSU fil-qiegħ ta' wara tal-kaxxa.
  2. Żerżaq il-PSU fil-kompartiment magħżul għalih.
  3. Waħħal il-PSU bil-viti minn wara tal-kaxxa.
Intern ta' wara view of Phanteks XT View Matrix case with PSU support area

Image 3.2: Rear internal view of the case, illustrating the power supply unit (PSU) mounting area and various drive bays.

3.4. Installazzjoni tad-Drajv tal-Ħażna

The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting locations.

  • SSDs ta' 2.5": Mount SSDs to the dedicated 2.5" brackets, typically located behind the motherboard tray.
  • HDDs ta' 3.5": Install HDDs into the drive cages, usually found beneath the PSU shroud.

3.5. Installazzjoni tal-Karta tal-Espansjoni (GPU)

  1. Neħħi l-għata tas-slott ta' espansjoni meħtieġa minn wara tal-kaxxa.
  2. Daħħal il-karta grafika tiegħek jew karti ta' espansjoni oħra fis-slots PCIe xierqa fuq il-motherboard.
  3. Waħħal il-karta bil-viti.
Intern view of Phanteks XT View Matrix case with components installed

Immaġni 3.3: Intern view of the case with a graphics card, CPU cooler, and fans already installed, demonstrating component compatibility and layout.

3.6. Installazzjoni tal-Fann u r-Radjatur

The XT View Matrix supports up to 9 x 120mm fan positions and full 360mm radiator support at the top. The case includes 3 M25-120 D-RGB fans.

  • Mount additional fans or radiators to the designated areas using the provided screws.
  • Connect fan and RGB cables to your motherboard or a compatible controller.

3.7. Ġestjoni tal-Kejbil

Uża l-kanali tar-rottaġġ tal-kejbils u l-punti ta' rbit wara t-trej tal-motherboard biex torganizza l-kejbils. Dan itejjeb il-fluss tal-arja u l-estetika.

4. Istruzzjonijiet Operattivi

4.1. Tixgħel

After all components are installed and cables are connected, press the power button located on the front I/O panel to start your system.

4.2. Portijiet I/O ta' Quddiem

Il-pannell tal-I/O ta' quddiem jipprovdi aċċess konvenjenti għal:

  • 1x port USB-C 3.2 Gen2
  • 1x USB 3.0 port
  • Buttuni ta' enerġija u Reset
  • Lighting control buttons (no software needed for basic control)
  • Mic/Headphone jacks

4.3. 600 LED Matrix Display Control

The integrated 600 LED Matrix screen can display dynamic system statistics, animations, and custom visuals. To fully customize the display, download and install the Phanteks Nexlinq app.

Phanteks XT View Matrix with Nexlinq app interface

Image 4.1: The 600 LED Matrix screen displaying dynamic content, with an overlay of the Phanteks Nexlinq app interface for customization.

Examples of LED Matrix display patterns and information

Immaġni 4.2: Diversi eż.amples of information and patterns that can be displayed on the 600 LED Matrix screen, including system stats and custom graphics.

5. Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura prestazzjoni ottimali u lonġevità tal-komponenti tal-PC tiegħek.

5.1. Tindif

  • Filtri tat-Trab: Periodically remove and clean the dust filters (if applicable) to maintain good airflow.
  • Intern: Use compressed air to remove dust from inside the case, especially from fans and heatsinks.
  • Barra: Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Evita cleaners li joborxu.

5.2. Manutenzjoni tal-fann

Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it.

6 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil-bini tal-PC tiegħek, ikkunsidra l-passi komuni li ġejjin għas-soluzzjoni tal-problemi:

  • Ebda Qawwa: Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch cable.
  • Il-Fannijiet Ma Jdurux/L-ebda RGB: Verify fan and RGB cables are correctly connected to the motherboard or controller. Check software settings for RGB control.
  • LED Matrix Display Issues: Ensure the display cable is securely connected. If using the Nexlinq app, check for software updates or reinstall the application.
  • Is-sħana żejda: Ensure all fans are installed correctly and spinning. Check for dust buildup and clean filters. Verify proper thermal paste application on CPU.

7. Speċifikazzjonijiet

KaratteristikaDettall
BrandPhanteks
Isem tal-MudellXT View Matriċi
Tip ta' KażTorri tan-Nofs
KulurGriż, Abjad
MaterjalSteel alloy, Polyester fabric, ABS, Tempered glass window
Dimensjonijiet tal-Prodott (P x W x H)44P x 23l x 50H cm (approximately 17.3 x 9.1 x 19.7 inches)
Piż tal-oġġett17.5 Liri (madwar 7.9 kg)
Metodu tat-tkessiħIlma, Arja
Fannijiet Inklużi3x M25-120 D-RGB fans
Display LED600 LED Matrix Screen
I/O quddiem1x USB-C 3.2 Gen2, 1x USB 3.0, Power/Reset, Lighting Control, Mic/Headphone
Internal Bays Quantity7 (various 2.5" and 3.5" bays)
Apparati KompatibbliDesktop, Gaming PC
Numru tal-Parti tal-ManifatturPH-XT523VM1_DWT01
Numru ta' Identifikazzjoni tal-Kummerċ Globali (GTIN)00886523304098

8. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għall-websajt uffiċjali ta' Phanteks. webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Phanteks Official Websit: www.phanteks.com

© 2024 Phanteks. Id-drittijiet kollha riżervati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.