mGYDY K01 EBike Display User Manual

1. Introduzzjoni

The mGYDY K01 EBike Display is a compact and intelligent speedometer cycling computer designed for electric bicycles. It provides essential riding data and control functions, enhancing your ebike experience. This manual provides detailed instructions for installation, operation, and maintenance of your K01 display.

2. Kompatibilità

The K01 EBike Display is specifically designed for use with BAFANG electric bike motors that utilize the UART communication protocol. It is compatible with BAFANG BBS0102B, G340, G320, and BBSHD mid-drive motors.

The display can be mounted on handlebars with a diameter of φ22.2mm or φ25.4mm.

Nota: Please verify your ebike motor's model number and communication protocol before installation to ensure compatibility.

3. Karatteristiċi tal-prodott

• Skrin LCD ta' 2.2 pulzieri: Provides clear, glare-resistant visuals with a 4-level backlight adjustment for optimal visibility in various lighting conditions.
• All-Weather Readability: IP66 waterproof rating ensures durability in rain or snow. Features an auto-dimming backlight and a light sensor to activate headlights at dusk.
• Wirja Komprensiva tad-Data: Shows real-time speed, single trip distance, total mileage (ODO), maximum speed, average speed, battery level, and power assist (PAS) level.
• Efficient Speed Control: Offers 0-9 adjustable power assist levels to suit different riding conditions and conserve energy.
• Walk Assist Function: Includes a 6km/h walk assist feature for easy maneuvering when not riding.
• Error Code Indication: Displays error codes for convenient system maintenance and troubleshooting.
• Protezzjoni bil-Password: Built-in system to secure your ebike from unauthorized use.

4. Kontenut tal-Pakkett

Il-pakkett jinkludi:

• 1 x mGYDY K01 EBike Display

5. Setup u Installazzjoni

Follow these steps to install your K01 EBike Display:

1. Agħżel Post tal-Immuntar: The K01 display is designed to be installed on the left side of the handlebar. Ensure there is sufficient space for secure mounting.
2. Dijametru tal-manubriju: Confirm your handlebar diameter is either 22.2mm or 25.4mm. The display's clamp is designed to fit these sizes.
3. Assigura l-Wiri: Open the display clamp, position it on the handlebar, and tighten the screws securely. Ensure the display is oriented correctly for optimal viewing.
4. Qabbad il-Cable: Locate the 5-pin female circular connector on the display cable. Connect it to the corresponding male connector on your BAFANG motor system. Ensure the connection is firm and secure.
5. Ġestjoni tal-Kejbil: Route the cable neatly along your ebike frame, securing it with cable ties if necessary, to prevent interference with moving parts.

Image: K01 EBike Display mounted on a handlebar, showing the side view mal-clamp. This illustrates the typical installation position.

Immaġni: Wara view of the K01 EBike Display, highlighting the handlebar clamp mechanism and the mounting screw.

Immaġni: Taħt view of the K01 EBike Display, illustrating the integrated cable and the 5-pin female circular connector for connection to the ebike motor.

6. Istruzzjonijiet Operattivi

The K01 display features three buttons for operation: + (Plus), Qawwa, u - (Minus).

Immaġni: Quddiem view of the K01 EBike Display with the screen illuminated, displaying current speed, battery charge, and power assist level.

6.1 Power On/Off

• Agħfas u żomm il- Qawwa buttuna biex tixgħel jew titfi d-displej.

6.2 Adjusting Power Assist (PAS) Levels

• Agħfas il- + button to increase the power assist level (0-9).
• Agħfas il- - button to decrease the power assist level (0-9).
• Level 0 indicates no motor assistance.

6.3 Displaying Mileage and Speed Data

• The display automatically shows real-time speed.
• Agħfas qasir il- Qawwa button to cycle through different data displays:
• VJAĠĠ: Single trip mileage.
• ODO: Total mileage.
• MAX: Maximum speed achieved during the current trip.
• AVG: Average speed during the current trip.

6.4 Headlight Control

• The display features a light sensor that can automatically activate your ebike's headlights at dusk if connected and supported by your ebike system.
• A headlamp indication icon will appear on the display when the headlights are active.

6.5 6km/h Walk Assist Function

• To activate the walk assist function, press and hold the - button. The ebike will move at a steady speed of 6km/h.
• Irrilaxxa l- - button to deactivate the walk assist.

7. Display Functions Overview

The K01 display provides a clear overview of your ebike's status and riding data. Refer to the image below for a visual guide to the display elements.

Image: K01 EBike Display with all segments illuminated, providing a comprehensive view of speed, battery level, PAS level, and other indicators like TRIP, ODO, MAX, AVG, and ERR.

• Indikazzjoni tal-batterija: Displays the current battery charge level (1-9 levels).
• Wiri tal-veloċità: Shows current speed in MPH or KM/H.
• Wiri ta' mili: Toggle between TRIP (single trip distance) and ODO (total distance).
• Livell PAS: Indicates the current Power Assist System level (0-9).
• Ikona tad-dawl ta' quddiem: Jixgħel meta d-dwal ta' quddiem ikunu attivi.
• Error Code (ERR): Displays specific error codes if a system fault occurs.

8. Speċifikazzjonijiet

Technical specifications for the mGYDY K01 EBike Display:

Image: Technical drawing of the K01 EBike Display, illustrating its physical dimensions: 78.5mm in length, 49mm in height, and 14mm in thickness.

9. Manutenzjoni

To ensure the longevity and optimal performance of your K01 EBike Display, follow these maintenance guidelines:

• Tindif: Imsaħ l-iskrin tad-displej u l-korp b'ċarruta ratba u damp cloth. Avoid using abrasive cleaners or solvents, which can damage the screen or casing.
• Espożizzjoni għall-Ilma: While the display is IP66 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is dry before connecting or disconnecting.
• Temperatura: Operate and store the display within the specified temperature ranges (-20°C to 70°C operating, -30°C to 80°C storage) to prevent damage.
• Spezzjoni tal-Cable: Periodically check the display cable and connector for any signs of wear, damage, or corrosion. Ensure connections remain secure.
• Protezzjoni Fiżika: Avoid dropping the display or subjecting it to strong impacts, which can cause internal or external damage.

10 Issolvi l-problemi

The K01 display is designed to indicate error codes (ERR) if a system issue is detected. If you encounter a problem, check the display for any error codes and refer to your BAFANG motor's manual for specific error code meanings and troubleshooting steps.

• Id-Displej Mhux Mixgħul:
  • Ensure the ebike battery is charged and turned on.
  • Check that the display cable is securely connected to the motor system.
  • Verify there is no visible damage to the display or cable.
• Inaccurate Speed/Mileage:
  • Ensure the wheel size setting in your ebike controller (if adjustable) is correct.
  • Check the speed sensor on your ebike for proper alignment and function.
• PAS Levels Not Changing:
  • Verify the buttons are functioning correctly.
  • Check for any error codes displayed.

If the issue persists or you encounter an unfamiliar error code, please contact the manufacturer's support for assistance.

11. Garanzija

The mGYDY K01 EBike Display comes with a Garanzija tal-Manifattur ta' 1 Snin mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali. Ma tkoprix ħsara kkawżata minn użu ħażin, inċidenti, modifiki mhux awtorizzati, jew installazzjoni mhux xierqa.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.

12. Appoġġ

For further assistance, technical support, or warranty inquiries, please contact mGYDY customer service through the retailer where you purchased the product or refer to the contact information provided with your purchase.