SONOFF AirGuard PM2.5 Smart Indoor Air Quality Monitor User Manual

1. Introduzzjoni

The SONOFF AirGuard PM2.5 Smart Indoor Air Quality Monitor (Model SAWF-07P) is designed to provide real-time monitoring of indoor air quality. It detects particulate matter (PM2.5 and PM10), temperature, and humidity, offering comprehensive environmental insights. This device is Matter-compatible, allowing seamless integration into various smart home ecosystems.

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your AirGuard monitor to ensure optimal performance and accurate readings.

2. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• SONOFF AirGuard PM2.5 Monitor (SAWF-07P)
• USB-C Cable
• Manwal għall-Utent

Note: A USB-A power adapter is required but not included in the package.

3. Prodott Aktarview

3.1 Komponenti tal-Apparat

The AirGuard monitor features a compact design with a clear display and intuitive controls.

3.2 Buttuni u Indikaturi

4. Setup

4.1 Tixgħel

1. Connect the provided USB-C cable to the monitor's USB-C port.
2. Plug the other end of the USB-C cable into a 5V/1A USB-A power adapter (not included).
3. The device will power on automatically and display current readings.

4.2 Installazzjoni u Tqabbil tal-App

The SONOFF AirGuard PM2.5 monitor supports Matter for broad smart home compatibility and can also be managed via the eWeLink app.

1. Niżżel l-App eWeLink: Fittex għal "eWeLink" in your smartphone's app store (App Store for iOS or Google Play Store for Android) and install it.
2. Daħħal il-Mod tat-Tqabbil: Long-press the Wi-Fi button on the top of the device for 5 seconds until the Wi-Fi icon on the display starts flashing. This indicates the device is in network pairing mode.
3. Żid Apparat fl-App: Open the eWeLink app, tap the "+" icon to add a device, and select the option to scan a QR code. Scan the QR code located on the back of your AirGuard monitor.
4. Segwi l-Prompts fuq l-Iskrin: Complete the pairing process by following the instructions in the eWeLink app. This will connect your device to your 2.4GHz Wi-Fi network.
5. Integrazzjoni tal-Materja (Mhux obbligatorja): If you wish to integrate with other Matter-compatible smart home platforms (e.g., Apple Home, Amazon Alexa, Google Home, SmartThings, Home Assistant), ensure you have a Matter hub. Once paired with eWeLink, you can usually initiate Matter pairing from your preferred smart home app by following its specific instructions for adding Matter devices.

5. Istruzzjonijiet Operattivi

5.1 Qari tad-Displej

The 3.73-inch screen provides real-time readings for:

• PM2.5: Particulate matter with a diameter of 2.5 micrometers or less (µg/m³).
• PM10: Particulate matter with a diameter of 10 micrometers or less (µg/m³).
• Temperatura: Ambient temperature (°C/°F).
• Umdità: Relative humidity (%).

5.2 Menu Mode and Calibration

You can adjust certain settings directly on the device using the Menu Mode:

1. Daħħal il-Modalità tal-Menù: Short-press the Settings Button (gear icon) once. The temperature unit will start flashing.
2. Unità tat-Temperatura tal-Iswiċċ: While the temperature unit is flashing, short-press the "+" or "-" button to switch between Celsius (°C) and Fahrenheit (°F).
3. Calibrate Temperature: While the temperature value is flashing (after cycling through units), short-press the "+" or "-" button to manually calibrate the temperature in 0.1°C increments.
4. Modalità ta' Sejbien tal-Iswiċċ: Short-press the Settings Button again to cycle to the detection mode. When the target item (PM2.5 or PM10) begins to flash, short-press the "+" or "-" button to switch between PM2.5 and PM10 display.
5. Calibrate Humidity: Short-press the Settings Button again to cycle to the humidity value. While the humidity value is flashing, short-press the "+" or "-" button to manually calibrate the humidity in 0.1% increments.
6. Exit Menu Mode: If there is no button operation for 3 seconds, the device will automatically save the current settings and exit Menu Mode. Alternatively, you can exit by pressing the Settings Button again after cycling through all available parameters.

5.3 Alert System

The AirGuard monitor features a triple-alert system to notify you of air quality changes:

• Allarm tal-Ħsejjes: An audible alert when thresholds are exceeded. Use the Buzzer Switch to enable/disable, mute for 30 minutes, or turn off completely.
• Multi-color LED Indicator: An LED light changes color (e.g., green for safe, yellow for cautionary, red for unhealthy) based on air quality levels. Long-press the Indicator Light Switch for 3 seconds to turn it on or off.
• Twissijiet tal-App: Customizable notifications sent to your eWeLink app when PM2.5, PM10, temperature, or humidity exceed defined thresholds.

5.4 Traċċar u Esportazzjoni tad-Data

The eWeLink app allows you to track and analyze historical air quality data:

• Access up to 12 months of historical data for PM2.5, PM10, temperature, and humidity.
• View clear, graphical charts directly in the app to identify trends.
• Export data for deeper analysis or sharing.

5.5 Kontroll tal-Vuċi

Integrate your AirGuard monitor with voice assistants for hands-free air quality checks:

• Use simple voice commands through Siri or Google Assistant to inquire about PM2.5 and PM10 levels.
• Requires connection to a compatible smart home platform (e.g., Apple Home, Google Home) via Matter.

6. Manutenzjoni

6.1 Tindif

• Gently wipe the device with a soft, dry cloth.
• Do not use liquid cleaners or abrasive materials, as these can damage the sensors or display.

6.2 Tqegħid

Optimal placement is crucial for accurate readings:

• Place the monitor on a flat surface using its retractable stand.
• Ensure the device is not mounted directly against a wall or obstructed, as the back and sides contain air vents essential for gas detection and accurate air samplipp.
• Avoid placing the device near strong air currents (e.g., open windows, air conditioners) or heat sources, which can affect temperature and humidity readings.

7 Issolvi l-problemi

• L-Apparat Mhux Jixgħel: Ensure the USB-C cable is securely connected to both the monitor and a functional 5V/1A power adapter. Try a different cable or adapter.
• Unable to Connect to Wi-Fi/App:
  - Kun żgur li n-netwerk Wi-Fi tiegħek huwa 2.4GHz. L-apparat ma jappoġġjax netwerks ta' 5GHz.
  - Confirm the device is in pairing mode (flashing Wi-Fi icon).
  - Check your Wi-Fi password.
  - Mexxi l-apparat eqreb lejn ir-router tal-Wi-Fi tiegħek.
  - Restart your router and the AirGuard monitor.
• Qari mhux eżatt:
  - Ensure the device is placed in an area with good air circulation, away from direct drafts, heat sources, or excessive humidity.
  - Allow the device to stabilize for a few minutes after initial power-on or relocation.
  - Perform manual calibration for temperature and humidity via the Menu Mode if you have a trusted reference sensor. PM2.5/PM10 sensors are factory calibrated.
• Alarm Triggering Frequently: Adjust the alert thresholds in the eWeLink app settings to suit your environment and preferences.
• No Data in App History: Ensure the device is continuously powered and connected to Wi-Fi. Data is recorded and uploaded to the cloud via the eWeLink app.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Informazzjoni dwar Garanzija

The SONOFF AirGuard PM2.5 Smart Indoor Air Quality Monitor comes with a Garanzija ta' sentejn mid-data tax-xiri. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

9.2 Appoġġ għall-Klijent

For any technical assistance, troubleshooting, or warranty inquiries, please contact SONOFF Customer Support:

• Email: support@ihead.cc
• Riżorsi onlajn: Visit the official SONOFF websit għal FAQs, manwali aġġornati, u fora tal-komunità.