ACEBEAM X20-R LUXEON HL4X LED Flashlight User Manual

1. Introduzzjoni

Grazzi tax-xiriasing the ACEBEAM X20-R LUXEON HL4X LED Flashlight. This high-performance flashlight is designed for reliability and versatility, offering up to 10,000 lumens of output. Please read this manual thoroughly before using the product to ensure proper operation and maintenance.

Image 1.1: The ACEBEAM X20-R LUXEON HL4X LED Flashlight, showcasing id-disinn kompatt u l-finitura sewda tiegħu.

2. Istruzzjonijiet tas-Sigurtà

To prevent injury or damage to the flashlight, observe the following safety precautions:

• Do not shine the flashlight directly into eyes. The high intensity beam can cause temporary vision impairment or permanent eye damage.
• Żomm fejn ma jintlaħaqx mit-tfal.
• Do not disassemble the flashlight head or main body. This may damage the flashlight and void the warranty.
• Use only recommended batteries. Incorrect battery types may cause damage or explosion.
• Evita li tesponi l-flashlight għal temperaturi estremi jew dawl tax-xemx dirett għal perjodi twal.
• Ensure the USB-C charging port cover is securely closed when not charging to maintain water resistance.

3. Kontenut tal-Pakkett

Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.

• ACEBEAM X20-R LUXEON HL4X LED Flashlight
• 2 x 3000mAh Li-ion Batteries (included and pre-installed)
• Eco-Sensa USB-C Charging Cable
• Manwal għall-Utent (dan id-dokument)

4. Setup

4.1 Installazzjoni tal-batterija

The ACEBEAM X20-R comes with two 3000mAh Li-ion batteries pre-installed. If you need to replace them:

1. Ħoll l-għatu tad-denb tat-torċa kontra l-arloġġ.
2. Insert the new 18650 Li-ion batteries with the positive (+) terminal facing towards the head of the flashlight.
3. Invita l-għatu tad-denb lura lejn l-arloġġ sakemm ikun issikkat b'subgħajk.

4.2 Iċċarġjar

The flashlight supports direct USB-C charging. Ensure the flashlight is turned off before charging.

1. Sib il-port tal-iċċarġjar USB-C fuq il-qafas tat-torċa.
2. Open the rubber cover of the USB-C port.
3. Connect the provided Eco-Sensa USB-C charging cable to the flashlight and to a compatible USB power source (e.g., wall adapter, computer USB port).
4. The indicator light near the charging port will show charging status (e.g., red for charging, green for fully charged).
5. Once charging is complete, disconnect the cable and securely close the rubber cover to maintain water resistance.

5. Istruzzjonijiet Operattivi

The ACEBEAM X20-R features a toggle switch and a dual-stage tail switch for various operations.

5.1 Basic Operation (Tail Switch)

• Momentarju ON: Half-press the tail switch. Release to turn off.
• ON/OFF kostanti: Fully press the tail switch until it clicks to turn the flashlight ON. Fully press again to turn OFF.
• Modalità Turbo: From OFF, fully press and hold the tail switch to instantly access Turbo mode. Release to turn off.
• Modalità Strobe: From OFF, quickly double-press and hold the tail switch to activate Strobe mode. Release to turn off.

5.2 Mode Selection (Toggle Switch)

The toggle switch allows selection between Duty, Ultra Low/SOS, and other brightness modes.

1. Duty Mode: Toggle the switch to the "Duty" position. Use the tail switch to cycle through brightness levels (Ultra Low, Low, Med1, Med2, High, Turbo) with a single press while ON.
2. Ultra Low/SOS Mode: Toggle the switch to the "Ultra Low/SOS" position. A single press of the tail switch will activate Ultra Low. A quick double-press will activate SOS.
3. Serratura Mekkanika: The patented mechanical lock prevents accidental activation during transport. Ensure the toggle switch is in the locked position when not in use.

5.3 Brightness Levels and Runtime

The flashlight offers multiple brightness levels. Runtimes are approximate and may vary based on environmental conditions and battery age.

Note: Output levels above 170 lumens are regulated and will step down to prevent overheating and prolong battery life.

6. Manutenzjoni

• Tindif: Naddaf il-qafas tat-torċa b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.
• O-rings: Periodically check and lubricate the O-rings with silicone grease to maintain water resistance. Replace O-rings if they are damaged or worn.
• Ħjut: Żomm il-ħjut tal-għatu tad-denb nodfa u llubrikati ħafif biex tiżgura tħaddim bla xkiel u kuntatt elettriku tajjeb.
• Kura tal-batterija: If the flashlight will not be used for an extended period, remove the batteries to prevent leakage. Store batteries in a cool, dry place.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

9.1 Garanzija tal-Manifattur

ACEBEAM provides a manufacturer warranty for 2 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 Appoġġ għall-Klijent

For technical assistance, warranty claims, or general inquiries, please contact ACEBEAM customer support through their official website or your authorized retailer. Refer to the product packaging or ACEBEAM's official webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.