Ortis 7-Day Programmable In-Wall Timer Switch

1. Informazzjoni Importanti dwar is-Sigurtà

TWISSIJA: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• This device requires a Wajer newtrali for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u iżolati sew.
• Għall-użu fuq ġewwa biss.

2. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• Wajer Ġewż
• Viti tal-Immuntar
• Manwal għall-Utent

3. Speċifikazzjonijiet

4. Installazzjoni

Qabel ma tibda: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltagtester.

Dijagramma tal-Wiring

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

Installazzjoni pass pass:

1. Itfi l-Enerġija: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. Neħħi s-Swiċċ il-Qadim: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
3. Identifika l-Wajers: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. Qabbad Wajers: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • Qabbad il- ISWED wajer mit-tajmer għall- LINJA (hot) wire from your electrical box.
   • Qabbad il- BLUE wajer mit-tajmer għall- TAGĦBIJA wire (to the light/appliance).
   • Qabbad il- ABJAD wajer mit-tajmer għall- NEWTRALI wire from your electrical box.
5. Swiċċ tal-Immuntar: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. Installa Pjanċa tal-Ħajt: Attach your standard wall plate (not included) over the timer switch.
7. Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker.

5. Kontrolli Fuqview

Immaġni: Dettaljata view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/tnaqqisasing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• Skrin LCD: Displays current time, day, operating mode, load state, and program information.
• Increase Key: Used to adjust time, program values, or navigate menus upwards.
• Decrease Key: Used to adjust time, program values, or navigate menus downwards.
• Ċavetta tal-Modalità: Cycles through different operating modes and settings menus.
• Ċavetta mixgħul/mitfi: Manually turns the connected load ON or OFF, or confirms selections.
• Indikatur LED: Illuminates when the connected load (e.g., light, fan) is ON.

6. Setup Inizjali

After installation and restoring power, the device will require initial setup.

Setting Current Time and Date:

1. Agħfas il- Modalità key until the time setting appears.
2. Uża l- Żieda u Tnaqqas keys to set the current hour, then press Mixgħul/Mitfi biex tikkonferma.
3. Irrepeti għall-minuti u l-jum tal-ġimgħa.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. Agħfas il- Modalità key until the latitude/longitude setting appears.
2. Uża l- Żieda u Tnaqqas keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. Agħfas Mixgħul/Mitfi to confirm. The display will show the calculated sunrise/sunset times for verification.

Aġġustament tal-Ħin tas-Sajf (DST):

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. Modi Operattivi

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 Modalità każwali

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• To activate Random Mode, press the Modalità key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 Modalità Manwali

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• Agħfas il- Mixgħul/Mitfi key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. Skedi ta' Programmazzjoni

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. Agħfas il- Modalità key repeatedly until "P01" (Program 1) appears on the screen.
2. Uża l- Żieda u Tnaqqas keys to select the desired ON time (hour and minute), then press Mixgħul/Mitfi biex tikkonferma.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press Mixgħul/Mitfi biex tikkonferma.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the Modalità key to advance to the next program number and repeat steps 2-4.
6. Once all programs are set, press the Modalità key until the current time display returns, indicating the timer is ready to operate.

Nota: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. Kompatibilità Wiesgħa

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• Fannijiet tas-Saqaf
• Fannijiet tal-egżost tal-kamra tal-banju
• Pompi tal-Funtana
• Pompi Pool
• Tbexxix

10. Manutenzjoni

The Ortis timer switch requires minimal maintenance.

• Tindif: Imsaħ il-wiċċ b'soft, damp drapp. Tużax tindif jew solventi li joborxu.
• L-ebda Partijiet li jistgħu jservu mill-utent: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11 Issolvi l-problemi

12. Garanzija u Appoġġ

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a Garanzija ta' 2 snin mill-manifattur.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis websit.