Lubluelu Upholstery Cleaner Machine A6Cleaner User Manual

Introduzzjoni

This manual provides instructions for the safe and efficient operation and maintenance of your Lubluelu A6Cleaner Upholstery Cleaner Machine. Please read all instructions carefully before use and retain this manual for future reference.

Istruzzjonijiet Importanti dwar is-Sigurtà

Dejjem segwi l-prekawzjonijiet bażiċi ta' sigurtà meta tuża apparati elettriċi biex tnaqqas ir-riskju ta' nar, xokk elettriku, jew korriment.

• Tgħaddix il-magna fl-ilma jew likwidi oħra.
• Tużax b'korda jew plagg bil-ħsara.
• Żomm ix-xagħar, il-ħwejjeġ maħlula, is-swaba’, u l-partijiet kollha tal-ġisem 'il bogħod mill-fetħiet u l-partijiet li jiċċaqilqu.
• Uża biss kif deskritt f'dan il-manwal.
• Spluggja mill-iżbokk meta ma tkunx qed tuża u qabel tnaddaf.

Komponenti tal-Prodott

Familiarize yourself with the parts of your Lubluelu A6Cleaner.

Immaġni: A detailed diagram illustrating the various components of the Lubluelu A6Cleaner, such as the clean water tank, dirty water tank, hose, power cord, suction nozzle, and included brushes.

• Cleaner Machine: Main unit with motor, tanks, hose, and power cord.
• Tank tal-Ilma Nadif: For fresh water and cleaning solution. Capacity: 1.75L (59.2 oz).
• Tank tal-Ilma Maħmuġ: Collects extracted dirty water. Capacity: 1L (33.8 oz).
• Żennuna tal-Ġbid: The primary cleaning tool.
• Ninon Brush: For deep cleaning stubborn stains on carpets and pet mats.
• Pinzell tas-silikonju: For gentle cleaning of delicate fabrics prone to pilling.
• Għodda tal-Laħlaħ tal-Manka: For self-cleaning the hose.
• Cord Organizer: Għall-ħażna pulita tal-korda tal-enerġija.

Setup u Assemblea

1. Ħoll il-Magni: Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ.
2. Waħħal il-Pajp u ż-Żennuna: Ensure the flexible hose is securely connected to the main unit and the desired cleaning nozzle (Ninon or Silicone brush) is attached to the end of the hose.
3. Imla t-Tank tal-Ilma Nadif: Remove the clean water tank. Fill it with warm water (not exceeding 140°F/60°C) and an appropriate amount of upholstery cleaning solution as per the solution manufacturer's instructions. Do not overfill. Reattach the tank securely.
4. Prepare the Dirty Water Tank: Ensure the dirty water tank is empty and properly seated in the machine.
5. Qabbad l-Enerġija: Unwind the power cord and plug the machine into a grounded electrical outlet.

Istruzzjonijiet Operattivi

The Lubluelu A6Cleaner uses a 3-step cleaning process for effective stain removal.

3-Step Cleaning Process

Immaġni: Visual guide to the three cleaning steps: spraying cleaning solution, scrubbing the stained area, and then suctioning the liquid and dirt.

1. Sprej: Turn on the machine. Hold the nozzle over the stained area and press the trigger to spray cleaning solution onto the fabric. Allow the solution to penetrate for a few minutes, especially for stubborn stains.
2. Scrub: Gently scrub the stained area with the brush attachment. For tougher stains, you may need to apply more pressure or repeat the spraying and scrubbing.
3. Ġbid: Release the spray trigger and firmly press the nozzle onto the surface. Pull the nozzle slowly across the wet area to extract the dirty water. Repeat until no more dirty water is being extracted and the area is as dry as possible.

The 600W motor provides up to 20 kPa of strong suction for deep stain removal. The 16.4 ft (5 m) power cord and 5.6 ft (1.7 m) flexible hose allow for extended reach, making it suitable for large rooms, sofas, stairs, and car interiors.

Video Demonstration: Cleaning a Mat

Manutenzjoni u Ħażna

Emptying and Cleaning Tanks

Immaġni: Instructions for removing and emptying the dirty water tank, highlighting the ease of maintenance.

• After each use, or when the dirty water tank reaches its maximum level, turn off and unplug the machine.
• Remove the dirty water tank and empty its contents into a drain. Rinse the tank thoroughly with clean water.
• Vojta kwalunkwe soluzzjoni li jkun fadal mit-tank tal-ilma nadif u laħlaħha.
• Ħalli ż-żewġ tankijiet jinxfu bl-arja qabel ma terġa' tgħaqqadhom mal-magna.

Self-Cleaning Function (Hose)

Immaġni: A visual representation of the self-cleaning tool in use, flushing the hose to prevent dirt buildup and odors.

• To prevent dirt buildup and odors in the hose, use the dedicated self-cleaning attachment.
• Waħħal l-għodda tat-tlaħliħ tal-pajp mat-tarf tal-pajp.
• Ensure the clean water tank has some clean water.
• Turn on the machine and press the self-cleaning button (if applicable, or run clean water through the hose by pressing the spray trigger).
• Allow water to flush through the hose until it runs clear.

Ħażna

Immaġni: The upholstery cleaner stored neatly in a cabinet, demonstrating its compact size and integrated storage features for the hose and power cord.

• Wrap the power cord neatly using the integrated cord organizer.
• Store the hose on its built-in holder.
• Store the machine in a dry, cool place, away from direct sunlight and extreme temperatures.

Issolvi l-problemi

If you encounter issues with your upholstery cleaner, refer to the following common problems and solutions:

Speċifikazzjonijiet tal-Prodott

Garanzija u Appoġġ

Your Lubluelu A6Cleaner Upholstery Cleaner Machine comes with a Garanzija tal-Manifattur ta' Sena.

For any questions or assistance regarding your product, please contact Lubluelu customer service via the service email provided with your purchase or on the official Lubluelu website. Our professional team is available to ensure your complete satisfaction.