Manwal ta' Istruzzjoni Ġeneriku tal-Ġonta Flotanti taċ-Ċilindru FD-1012/M12×1.25

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of the Generic FD-1012/M12×1.25 Cylinder Floating Joint. Please read these instructions thoroughly before using the product to ensure safe and efficient performance. Retain this manual for future reference.

2. Prodott Aktarview

The FD-1012/M12×1.25 is a cylinder floating joint designed to absorb misalignment between a cylinder and its driven load. This flexibility helps prevent damage to the cylinder rod and extends the lifespan of the entire pneumatic system. It features a M12*1.25mm thread size and is constructed with a plastic body and stainless steel exterior finish.

Figura 1: Generic FD-1012/M12×1.25 Cylinder Floating Joint. This image displays the floating joint, highlighting its threaded connection and main body structure.

Karatteristiċi ewlenin:

Mudell: FD-1012/M12×1.25
Daqs tal-ħajta: M12 * 1.25mm
Materjal: Plastic body with Stainless Steel exterior finish
Designed to compensate for minor misalignments

3. Setup u Installazzjoni

Proper installation is crucial for the optimal performance and longevity of the floating joint. Follow these steps carefully:

Preparazzjoni: Ensure that the cylinder rod and the driven load have compatible M12*1.25mm female threads. Clean both threads to remove any debris or contaminants.
Attachment to Cylinder Rod: Carefully thread the floating joint onto the cylinder rod. Hand-tighten first, then use an appropriate wrench to secure it firmly. Do not overtighten, as this can damage the threads or the joint itself.
Attachment to Load: Connect the other end of the floating joint to the driven load. Ensure proper alignment before tightening. The floating mechanism will accommodate minor angular or parallel misalignments.
Verifika: After installation, manually move the cylinder rod and the load through their full range of motion to confirm smooth operation and verify that the floating joint is functioning correctly without binding.

Nota: Always refer to the specifications of your cylinder and load for specific torque recommendations.

4. Prinċipji Operattivi

The FD-1012/M12×1.25 floating joint is designed to provide a flexible connection between a pneumatic or hydraulic cylinder and its load. Its internal mechanism allows for slight angular and parallel deviations, preventing stress on the cylinder rod and piston. This is particularly beneficial in applications where perfect alignment is difficult to achieve or maintain due to manufacturing tolerances or dynamic operating conditions.

The joint operates passively, adjusting its position as needed during the cylinder's stroke. No external power or control is required for its floating function.

5. Manutenzjoni

The Generic FD-1012/M12×1.25 Cylinder Floating Joint is designed for minimal maintenance. However, regular inspection is recommended to ensure continued reliable operation.

Spezzjoni Viżwali: Periodically check the joint for any signs of wear, cracks, or damage to the plastic body or metal components.
Thread Integrity: Ensure that the threaded connections remain secure and free from loosening.
Indafa: Keep the joint free from excessive dust, dirt, or corrosive substances that could impede its movement or degrade materials.
Lubrikazzjoni: No specific lubrication is required for the internal floating mechanism under normal operating conditions.

If significant wear or damage is observed, the joint should be replaced to prevent potential system failures.

6 Issolvi l-problemi

This section addresses common issues that may arise during the use of the floating joint.

Problema	Kawża Possibbli	Soluzzjoni
Joint feels stiff or binds	Excessive misalignment; debris in joint; overtightened connections	Check system alignment; clean joint; ensure connections are tightened to specification, not overtightened.
Storbju mhux tas-soltu waqt it-tħaddim	Component wear; loose connections; excessive load	Inspect for wear and replace if necessary; re-tighten connections; verify load is within system limits.
Visible damage to joint body	Impact; material fatigue; chemical exposure	Replace the floating joint immediately.
Threads are stripped or damaged	Overtightening; cross-threading; improper installation	Replace the floating joint and ensure correct installation procedures are followed.

7. Speċifikazzjonijiet

The following are the technical specifications for the Generic FD-1012/M12×1.25 Cylinder Floating Joint:

Mudell: FD-1012/M12×1.25
Daqs tal-ħajta: M12*1.25mm (equivalent to #0-80 in some listings)
Materjal: Plastic (body), Stainless Steel (exterior finish/metal type)
Tip ta' Qafliet: Hex
Kulur: Fidda
Thread Style: Leminija
Thread Coverage: Kompletament bil-kamin
Dimensjonijiet tal-Prodott (L x W x H): 1.77 x 1.1 x 0.55 pulzieri
Piż tal-oġġett: 3.53 uqija
Pajjiż/Reġjun tal-Manifattura: Iċ-Ċina
UPC: 773774498570

8. Garanzija u Appoġġ

Warranty information for this Generic product is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the seller or the manufacturer directly through your purchase platform. Ensure you have your purchase details, including the ASIN (B0FRS64LXK) and model number (FD-1012/M12×1.25), available when contacting support.

	KEYENCE FD-X Serje Clamp-Fuq Mikro Sensor tal-Fluss: Karatteristiċi, Speċifikazzjonijiet, u Applikazzjonijiet Skopri s-Serje KEYENCE FD-X, cl versatiliampSensur tal-fluss mikro -on għal monitoraġġ preċiż tal-fluss tal-likwidu f'applikazzjonijiet industrijali. Tgħallem dwar id-disinn mingħajr problemi tiegħu, id-detezzjoni mingħajr paragun, il-konnettività, u l-ispeċifikazzjonijiet tekniċi.
	KEYENCE Serje FD-V70: Sensor tal-Fluss Diġitali - Karatteristiċi, Applikazzjonijiet, u Speċifikazzjonijiet Skopri s-Serje KEYENCE FD-V70, għażla separata-ampSensur tal-fluss diġitali tat-tip liffier iddisinjat għal monitoraġġ preċiż tal-volum tal-fluss. Dan id-dokument jagħti dettalji dwar il-karatteristiċi avvanzati tiegħu, l-applikazzjonijiet diversi, l-ispeċifikazzjonijiet tekniċi, u l-gwida għall-installazzjoni għal użu industrijali.
	Manwal ta' Istruzzjonijiet għall-Programmazzjoni Avvanzata tas-Serje OTC DAIHEN Almega FD Dan il-manwal tal-istruzzjonijiet jipprovdi gwida komprensiva dwar programmazzjoni avvanzata u operazzjonijiet bażiċi għas-sistemi robotiċi tas-serje OTC DAIHEN Almega FD, li jkopri l-modi ta' tagħlim, daqq, u operazzjoni awtomatika.
	Istruzzjonijiet għad-Deidratatur NESCO: Gwida Komprensiva għall-Preservazzjoni tal-Ikel Din il-gwida tipprovdi struzzjonijiet dettaljati għall-użu tad-deidraturi NESCO, li jkopru t-tħaddim, il-prekawzjonijiet ta’ sigurtà, il-linji gwida għat-tnixxif tal-frott, ħaxix, laħam imnixxef, ħut, u ħwawar, kif ukoll informazzjoni dwar l-ippakkjar, il-ħażna, u l-garanzija.
	Manwal tal-Utent u Gwida tas-Sigurtà tal-Forn tal-Konvezzjoni Svopes Manwal komprensiv għall-utent u struzzjonijiet dwar is-sigurtà għall-Franijiet tal-Konvezzjoni Svopes, li jkopru l-installazzjoni, it-tħaddim, il-manutenzjoni, l-ispeċifikazzjonijiet, u s-soluzzjoni tal-problemi għall-mudelli FD-66, FD-66XY, FD-21XY, FD-21, FD-47, u FD-47XY. Jinkludi twissijiet importanti dwar is-sigurtà, identifikazzjoni tal-partijiet ewlenin, u dettalji tal-aċċessorji.
	KEYENCE FD-R Serje ClampManwal tal-Istruzzjonijiet tal-Miter tal-Fluss -on Manwal ta' struzzjonijiet komprensiv għas-serje KEYENCE FD-R clamp-fuq il-miters tal-fluss, li jagħtu dettalji dwar l-installazzjoni, il-wajers, is-settings, is-soluzzjoni tal-problemi, l-ispeċifikazzjonijiet, u l-manutenzjoni għall-mudelli FD-R50, FD-R80, FD-R125, u FD-R200.

FD-1012/M12×1.25